Sharp Projector Pg M25x User Manual

Easy to Use Functions
-97
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1When “” is displayed, press
 or  to set the
Break Timer.
•You can set anywhere between 1 and
60 minutes (in 1 minute units).
To cancel the break
time
1Press Undo on the remove
control or press R...

-98
Reversing/Inverting Projected Images
This projector is equipped with a reserve/invert image function that allows you to reverse or
invert the projected image for various applications.
Selected Item
Front
Ceiling + Front
Rear
Ceiling + Rear
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Front Ceiling+Front Rear Ceiling+Rear
Setting the Projection Mode
Select “PRJ Mode” in the “Options (2)”
menu on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and...

Easy to Use Functions
-99
Locking the Operation Buttons on the Projector
This function can be used to lock the use of certain operation buttons on the projector.
The following are the three keylock levels.
Keylock Level
   Normal
   Level A
   Level B
Setting up the Keylock
Select “Keylock Level” in the “Options
(2)” menu on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
•If a password has been set,...

-100-100
Setting up a Password
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page 99) is more effective.
Entering the Password
Select “Password” in the “Options (2)”
menu on the menu screen
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1Press  or  to select
the desired number and then
press 
.
2Enter the 3 remaining...

Easy to Use Functions
-101
Changing the Password
Select “Password” in the “Options (2)”
menu on the menu screen
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1Press ,  and  to
enter the password in “Old
Password” and press 
.
2Press ,  and  to
set the new password and
press 
.
3Enter the new 4-digit password
again in “Reconfirm” and press
.
Note
•If you do not want to set a password, leave
the fields in procedures 2 and 3...

-102
Setting the Anti-Theft
Setting the anti-theft function will disable any projection of images even if signals are sent to
the projector. A keycode is necessary to release the system lock. Make sure to remember the
key code you set.
Info
If the keycode is not correctly entered in the key code field, only the key code screen will
be displayed and no other operations will be possible. Repairing the system lock even
within the period of guarantee will incur reparation costs. For details, refer to your...

Easy to Use Functions
-103
2Enter the remaining 3 digits in
the same way as above and
press 
.
3Re-enter the same key code in
Reconfirm and press 
.
Note
•The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting section appears after the
power is turned on. At that time, enter
the right keycode.
•Press the buttons on the remote control if
the buttons on the remote control are used
for setting the keycode. In the same manner,
press the buttons on the projector...

-104
Setting the Anti-Theft (cont.)
Changing the Keycode
•When “Anti-Theft” is selected and  a pass-
word has been entered, the password input
box is displayed. After the password has been
entered, you can change the keycode.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1Enter the preset 4-digit keycode
in “Old Code” using the buttons
on the GyroRemote or...

Easy to Use Functions
-105
Initializing the Settings
This function allows you to initialize the settings you have made in the projector.
Returning to the
Default Settings
Select “All Reset” in the “Options (2)”
menu on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
•If a password has been set, the pass-
word input box will be displayed when
selecting “All Reset”.
The following items cannot be...

-106
This function can be used to display all the adjusted settings as a list on the screen.
Displaying the Adjustment Settings
Overview of ALL Menu
Settings
Select the “Status” menu and press 
on the menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
-106
PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 106