Sharp Projector Pg M25x User Manual
Have a look at the manual Sharp Projector Pg M25x User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Easy to Use Functions -97 Displaying the Break Timer "On-screen Display Displaying and Setting the Break Timer Select “Break Timer” from the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1When “” is displayed, press or to set the Break Timer. •You can set anywhere between 1 and 60 minutes (in 1 minute units). To cancel the break time 1Press Undo on the remove control or press R on the remote control. Note •When using the GyroRemote, set the Break time using the GyroRemote (see page 41). •Auto Power Off will be temporarily dis- abled during the Break Timer. If no signal transmission occurs for more than 15 minutes after the Break Timer has completed, the projector will turn off. •The Break Timer will be displayed on the startup image. To change the screen dis- played during the Break Timer, change the setting of “Startup Image” (see page 95). PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 97
-98 Reversing/Inverting Projected Images This projector is equipped with a reserve/invert image function that allows you to reverse or invert the projected image for various applications. Selected Item Front Ceiling + Front Rear Ceiling + Rear Description Normal image Inverted image Reversed image Reversed and inverted image Front Ceiling+Front Rear Ceiling+Rear Setting the Projection Mode Select “PRJ Mode” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note •If a password has been set, the password input box will be displayed when select- ing the “PRJ Mode”. •This function is used for the reversed im- age and ceiling-mount setups. See page 25 for these setups. -98 PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 98
Easy to Use Functions -99 Locking the Operation Buttons on the Projector This function can be used to lock the use of certain operation buttons on the projector. The following are the three keylock levels. Keylock Level Normal Level A Level B Setting up the Keylock Select “Keylock Level” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note •If a password has been set, the password input box will be displayed when select- ing the “Keylock Level”. Canceling the Keylock Setting When the Keylock Level is set to “Normal”, all buttons are functional. Select “Keylock Level” in the “Options (2)” menu and set “ Normal” on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note •When a password has been set, and “Keylock Level” is selected, the password input box will be displayed. •If both a password and the Keylock Level have been set at the same time, the pass- word will be necessary before changing the Keylock Level. Description All operation buttons are functional. Only INPUT/VOLUME/AV MUTE buttons on the projector are available. All operation buttons on the projector are unavailable. PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 99
-100-100 Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the “Options (2)” menu. Using a password together with the Keylock Level (page 99) is more effective. Entering the Password Select “Password” in the “Options (2)” menu on the menu screen ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1Press or to select the desired number and then press . 2Enter the 3 remaining digits and press . 3Enter the password again in “Reconfirm” and press . Note •When a password is set, you need to enter the password to change “PRJ Mode”, “Keylock Level”, “Anti- Theft” and “All Reset” settings. PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 100
Easy to Use Functions -101 Changing the Password Select “Password” in the “Options (2)” menu on the menu screen ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1Press , and to enter the password in “Old Password” and press . 2Press , and to set the new password and press . 3Enter the new 4-digit password again in “Reconfirm” and press . Note •If you do not want to set a password, leave the fields in procedures 2 and 3 blank and press . •To cancel the password settings, click . If You Forget Your Password If you forget the password, delete it and set a new password using the following procedure. 1Press PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 101
-102 Setting the Anti-Theft Setting the anti-theft function will disable any projection of images even if signals are sent to the projector. A keycode is necessary to release the system lock. Make sure to remember the key code you set. Info If the keycode is not correctly entered in the key code field, only the key code screen will be displayed and no other operations will be possible. Repairing the system lock even within the period of guarantee will incur reparation costs. For details, refer to your nearest Sharp Representative. See page 118. -102 Entering the Keycode •“Anti-Theft” cannot be selected unless “Password” is set. (See page 100.) •When “Anti-Theft” is selected, the password input box will appear. Enter the keycode af- ter the right password is entered. Select “Anti-Theft” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1Press any button on the remote control or on the GyroRemote, to enter the keycode. Note •The following buttons cannot be set as key codes. (both on the projector and GyroRemote) •POWER button •ENTER button •UNDO button •MENU button (GyroRemote) •GYRO ACTIVE button •POINTER button •L-CLICK/ENTER button •R-CLICK/UNDO button •POWER button •MENU button •TEACH button •RF CH+ button PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 102
Easy to Use Functions -103 2Enter the remaining 3 digits in the same way as above and press . 3Re-enter the same key code in Reconfirm and press . Note •The Keylock function will become temporarily disabled. When “Anti-Theft” is set, the keycode inputting section appears after the power is turned on. At that time, enter the right keycode. •Press the buttons on the remote control if the buttons on the remote control are used for setting the keycode. In the same manner, press the buttons on the projector if the but- tons on the projector are used for setting the keycode. Info •Once the function is activated, you must remember the correct keycode. We sug- gest you record the keycode in a safe place where only authorized users will have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 118). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset). •If the Anti-theft function is set and you loose the GyroRemote, you will not be able to release the Anti-theft function. In case you loose the GyroRemote, contact your nearest repair center. PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 103
-104 Setting the Anti-Theft (cont.) Changing the Keycode •When “Anti-Theft” is selected and a pass- word has been entered, the password input box is displayed. After the password has been entered, you can change the keycode. Select “Anti-Theft” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1Enter the preset 4-digit keycode in “Old Code” using the buttons on the GyroRemote or on the projector. 2Press any button you like on the GyroRemote or the projector to enter the new keycode. 3Enter the same 4-digit keycode in “Reconfirm” . Note •If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press . Info •If you travel with your projector without your GyroRemote, you will not be able to unlock the Anti-Theft keycode. Therefore, we recommend you use the projector buttons to lock/ unlock the Anti- Theft keycode. -104 PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 104
Easy to Use Functions -105 Initializing the Settings This function allows you to initialize the settings you have made in the projector. Returning to the Default Settings Select “All Reset” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note •If a password has been set, the pass- word input box will be displayed when selecting “All Reset”. The following items cannot be initialized. •Fine Sync •Special Modes •Signal Info •Options •Lamp Timer •Anti-Theft •Language •Image stored using “Image Capture” PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 105
-106 This function can be used to display all the adjusted settings as a list on the screen. Displaying the Adjustment Settings Overview of ALL Menu Settings Select the “Status” menu and press on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. -106 PG-M25X#E#p97_106.p6502.4.29, 3:24 PM 106