Sharp Projector Pg M25x User Manual

Basic Operation
-47
Supplied
accessoryUSB cable
USB port
Notebook computer
USB cable
Using the Wireless Presentation Function of the GyroRemote
The remote control can perform mouse operations on a computer screen displayed on the
actual screen. The remote control can also be used as a pointer. (See page 44)
Connecting the
Computer and the Projector
1Connect the projector to the
computer using the supplied
USB cable.
Note
•This function only works with
Microsoft Windows OS and Mac OS.
However, this...

Using as a Wireless
Mouse
1Move the GyroRemote while
holding down 
. The  LED
indicator is lit.
2Press  or . It functions
the same as the buttons of a
mouse connected to the com-
puter.
•In the case of one mouse button (such
as on a Macintosh) clicking this button
will function the same as either 
and .
Connecting the
GyroRemote with a
Cable
Connect the GyroRemote and projector using
a cable in places where signal reception is
weak.
Note
•GyroRemote turns itself off if detached
from the ø25 to ø3.5 mm...

Basic Operation
-49
Turning Off the
GyroRemote
Make sure to turn off the GyroRemote to
prevent any unwanted operations, when not
using the projector. This also prevents
consumption of batteries set in the
GyroRemote.
1Press  and located in-
side the lower cover on the
GyroRemote at the same time
for more than 2 seconds.
•The LED Indicator will flash 3 times
and the GyroRemote will turn off.
Any buttons pressed after (excluding
) will not emit signals.
2Press  on the GyroRemote
to turn on the GyroRemote....

This projector has three sets of menu screens that allow you to adjust the image and various
projector settings.
You can operate the menus from the projector or GyroRemote using the following proce-
dure.
Using the Menu Screen
On-screen menu for INPUT 1 RGB modeOn-screen menu for INPUT 2
or INPUT 3 Mode
Menu Bar
(Main Menu)
MENU button
" "" "
"Menu Screen
Menu Selections on the
Projector (Adjustments)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen is
displayed...

Basic Operation
-51
2Press  or  to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 56 and 58.
•When using the GyroRemote to
move through a menu, see page 54.
3Press  or  to select
the item you want to adjust.
Note
•To display a single adjustment item,
press 
 after selecting the item.
Only the menu bar and the selected
adjustment item will be displayed.
Then if you press 
 or ,
the following item (“Phase” is after
“Clock”) will be displayed.
•Press 
 to...

Sub menu
MENU button
Adjustment buttons
(
"'\ | "'\ |"'\ | "'\ |
"'\ |)
ENTER button

 Menu Screen
Menu Selections on the
projector (Settings)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Card” menu screen is displayed
in INPUT 4 mode.
•The on-screen display shown on the
right is displayed when the INPUT 1
mode is selected.
2Press  or  to select the
menu you want to adjust.
Note
•For details on...

Basic Operation
-53
4Press .
•The cursor shifts to the sub menu.
5Press  or  to select
the setting of the item
displayed in the sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press 
 or
 to select “Ye s” or “OK” and then
press 
.
7Press .
•The menu will disappear and the
adjustment is stored.
Sub menu
PG-M25X#E#p50_64.p6502.4.29, 3:15 PM 53 

1
2
3
On-screen menu for INPUT 1 mode
MENU button
GYRO ACTIVE
button
GYRO ACTIVE
button (Rear)
Menu Bar
(Main Menu)
-54
Using the Menu Screen (cont.)
Using the GyroRemote to
Navigate the On-screen
Menu (Adjustments)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Memory Card” menu screen is
displayed in INPUT 4 mode.
•The screen on the right shows the
INPUT 1 mode screen.
21 11 1
1While holding down ,
move the GyroRemote left
and right to...

Basic Operation
MENU button
GYRO ACTIVE
button
Using the GyroRemote
to Navigate the On-
screen Menu (Settings)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Memory Card” menu screen is
displayed in INPUT 4 mode.
•The screen on the right shows the
INPUT 1 mode screen.
21 11 1
1While holding down ,
move the GyroRemote left
and right to select the menu.
Note
•The GyroRemote will not function if
 is not held down.
•If 
 is pressed twice,...

-56
+30 -30
+30 -30
+30 -30
+30 -30
+30 -30
+30 -30
+30 -30
+3 -3
+150 –150
+150 –150
+30 –30
+60 –60
1
2•
•7
1
2
•
•7
1
2
3
•
•7640 
× 480
720 × 480
480PResolution
1024 
× 768
  800 × 600Vert Freq
60 Hz
75 Hz
Resolution
1024 
× 768
 800 × 600 Vert Freq
60 Hz
75 Hz
640 × 480
31.5 KHz
60 Hz
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Menu Bar Items
This list shows the items that can be set in the projector.
 INPUT 1 Mode
Page 106
Note
•The resolution, vertical frequency and...