Sharp Projector Pg M25x User Manual

Basic Operation
-37
Z
o
o
m
 
in
Z
o
o
m
 o
u
t
Selecting the On-screen
Display Language
•The on-screen display language of the pro-
jector can be set to English, German, Span-
ish, Dutch, French, Italian, Swedish, Por-
tuguese, Chinese, Korean or Japanese.
•The following explanation uses operations
from the projector as example.
1Press .
•The menu will be displayed.
2Press  or  to select
“Language”.
3Press  or  to select
the desired language, and then
press 
.
4Press .
•The desired language will be set...

Correcting the Trapezoidal Distortion (Keystone Correction)
Correcting the Trap-
ezoidal Distortion
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction.
The following explanation uses operations
from the projector as example.
Note
•Keystone Correction is the correction for
trapezoidal distortion that occurs when
the image is positioned away from the
center axis of the screen.
•
The trapezoidal distortion can be corrected
up to an angle of approximately ±35 degrees.
•The...

Basic Operation
-39
3Press .
Note
•You can use the same settings used
in NORMAL mode 4:3 for 16:9.
•Straight lines or the edges of images
may appear jagged while adjusting
the image.
•The Digital Shift function is
displayed when a wide screen from
video or digital video is displayed.
When using the GyroRemote:
•You can use the                 button to move the screen up or down.
•Press         to return to the original position.
•The Digital Shift function works with STRETCH or SMART STRETCH screen. For...

-40
Using the GyroRemote
Before Using the
GyroRemote
Make sure that the antenna on the projector
is fully extended before operating the projector
with the GyroRemote.
Info
•The control range under actual operating
conditions may be less than optimum
depending on where the projector is
placed and the radio signal environment.
•If the GyroRemote does not operate, press
 on the GyroRemote.
Gesture Operation
(Selecting OSD Menus,
Operating Presentation Tools)
The GyroRemote accurately tracks your hand...

Basic Operation
-41
Function Assign
The Button Assign function on the
GyroRemote, consists of 5 items (1/5 to 5/5)
and within each, there are 4 function buttons
(Function 1 to 4.)
Selecting the function buttons for assigning
items is done via the projector.
1Press  on the GyroRemote.
•Each time you press  the Button
Assign selection changes as shown
below.
1/52/53/54/55/5
2Press 
•The Button Assign selection display
disappears.
Function 1 button
Function 2 button
Function 3 button
Function 4 button...

Using the GyroRemote (cont.)
GyroRemote Channel
Setting
The GyroRemote uses radio signals, which
can receive interference under certain
conditions. To avoid interference, when using
multiple GyroRemotes, register a different
channel for each GyroRemote in the projector.
The GyroRemote has 8 channels for U.S.,
Canada, etc. and 4 channels for Europe,
Australia, Oceania and Aisa.
1Press  located on the
GyroRemote.
•You can also confirm the RF channel
by the number of times the LED
indicator flashes.
(Ex: RF...

Basic Operation
-43
3Press  on the GyroRemote
you want to register.
•The LED indicator on the GyroRemote
lights up.
•“Register” is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, “Learn
Mode” is displayed.
Note
•If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
4Press 
•This completes the Registration mode.
Registering Multiple
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes for U.S.,
Canada, etc. and...

Using the Presentation Tools
The GyroRemote is equipped with the following presentation tools. These are very useful
when emphasizing a main point during the presentation.
•Pointer function
•Stamp function
•Line function
Using the Pointer
Using the GyroRemote. For details see
page 40.
1Hold the GyroRemote and
move it while pressing 
.
•The pointer moves in accordance with
the GyroRemote’s movements.
•The pointer disappears when 
 is
released.
Note
•When operating the GyroRemote
with multiple projectors,...

Basic Operation
-45
Using the Stamp Func-
tion
Using the GyroRemote
For details see page 40.
1Press  on the GyroRemote
and then select “Button Assign
1/5”.
•The assign function is displayed at the
bottom right of the screen.
2Press  on the GyroRemote.
•The stamp type will change every time
 is pressed, as shown on the right.
3Press  on the GyroRemote to
select the color.
•The stamp color will change every time
 is pressed, as shown on the right.
4Move the GyroRemote while
holding down 
.
•The stamp will...

Using the Line Function
Using the GyroRemote, you can draw on the
screen various shapes such as squares, ovals,
horizontal, vertical, perpendicular and free-
style lines.
Using the GyroRemote,
For details see page 40.
1Presson the GyroRemote and
then select “Button Assign 1/5”.
•The assign function is displayed at the
bottom right of the screen.
2Press  on the GyroRemote.
•The type of drawing will change every time
 is pressed, as shown on the right.
3Press  on the GyroRemote to
select the color.
•The...