Sharp Projector Pg M20s User Manual

Easy to Use Functions
-57
Setting a Backg round  Imag e
This function allows you to select the image displayed when no signal is being sent to the 
projector.
*1 You can set a captured image as a background image by selecting  “Custom ”.
*2 If the input signal has interference, the screen will be displayed with the interference.
Selecting a 
Background Image
Select  “Background ” in the  “Options
(1) ” me nu  ➝   For settings,  see p ag e  38 .
Note
•When  “Custom ” is selected, an image
saved using...

58
Lamp Usage Time
Using an RGB monitor loop-out adaptor (sold separately) and an RGB cable (commercially 
available), be sure to set to “
 Yes (Y Cable)” when you want to display computer images
both on the projector and on a monitor.
Using a RGB Monitor 
Loop-out Adaptor
Select  “Monitor Out ” in the  “Options (1) ”
me nu  ➝  For settings,  see p ag e  38 .
Note
•Be sure to set to  “ Disable” when not
using an RGB monitor loop-out adaptor.
• If the setting is not correct, the image may 
be dark, too...

Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting 
the Break Timer
Select “Break Timer” from the “Options 
(2)”  me nu  ➝  For details,  see p ag e  36 .
1When “” is displayed, press
 or  to set the Break
Timer.
• You can set anywhere between 1 and 
60 minutes (in 1 minute units).
2Press  to cancel the Break
Timer.
Note
• Auto Power Off will be temporarily dis- 
abled during the Break Timer. 
If no signal transmission occurs for more
than 15 minutes after...

Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or 
invert the projected image for various applications.
Setting the Projection 
Mode
Select “PRJ Mode ” in the  “Options (2) ”
menu  ➝ For settings, see page  3 8.
Note
• If a password has been set, the password 
input box will be displayed when select-
ing the  “PRJ Mode ”.
• This function is used for the reversed im-
age and ceiling-mount setups. See page 
19  for these...

Easy to Use Functions
-61
Canceling the Keylock 
Setting
When the Keylock Level is set to “Normal ”,
all buttons are functional.
Select  “Keylock Level ” in the  “Options
(2) ” menu and set 
“ Normal ”. ➝  For
settings, see page  38.
Note
•When a password has been set, and 
“Keylock Level ” is selected, the password
input box will be displayed.
• If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing 
the Keylock Level.
Setting up a  Pas...

Changing the Password
Select “Password ” in the  “Options (2) ”
menu  ➝ For selecting, see page  38.
1Press ,  and  to enter
the password in  “Old Pass-
word ” and press 
.
2Press ,  and  to set the
new password and press 
.
3Enter the new 4-digit password 
again in  “Reconfirm ” and
press 
.
Note
• If you do not want to set a password, 
leave the fields in procedures 2 and 3 
blank and press 
.
• To cancel the password settings, click 
.
If You Forget Your 
Password
If you forget the password, delete it...

Easy to Use Functions
-63
Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use 
this function or not. If you do not want to use this function, just do not enter  the keycode.
Once the theft-deterrent function is activated, users will need to enter the correct keycode
each time the projector is started. Failure to enter the correct keycode will prevent images
from being projected. The following procedures explain how to use this function....

Setting the Anti-Theft (cont.)
When “Anti-Theft ” is set, the keycode
inputting section appears after the 
power is turned on. At that time, enter
the right keycode.
• Press the buttons on the remote control if 
the buttons on the remote control are used 
for setting the keycode. In the same manner, 
press the buttons on the projector if the 
buttons on the projector are used for setting 
the keycode.
Info
•Once the function is activated, you must 
remember the correct keycode. We 
suggest you record the...

Easy to Use Functions
-65
Initializing the Settings
This function allows you to initialize the settings you have made in the projector.
Returning to the 
Default Settings
Select “All Reset ” in the  “Options (2) ”
menu  ➝ For resetting, see page  36.
Note
•If a password has been set, the pass- 
word input box will be displayed when
selecting  “All Reset ”.
The following items cannot be initialized.
• Fine Sync 
•Special Modes
• Signal Info
• Options 
•Lamp Timer
• Anti-Theft
• Language
• Image stored...

This function can be used to display all the adjusted settings as a list\
 on the screen.
Displaying the Adjustment Settings
Overview of All Menu 
Setting
Select the “ Status ” me nu and press 
➝  For details, see page  36.
-66