Sharp Projector Pg M20s User Manual

Basic Operation
-37
2Press  or  to select the
menu you want to adjust.
Note
• For details on the menus, see the 
tree charts on pages  34  and  35 .
3Press  or  to select the
item you want to adjust.
Note
• To display a single adjustment item, 
press 
 after selecting the item.
Only the menu bar and the selected 
adjustment item will be displayed. 
Then if you press 
 or , the fol-
lowing item ( “Phase ” is after  “Clock ”)
will be displayed.
• Press 
 to return to the previous
screen.
4Press  or  to...

MENU button
 buttons
ENTER button MENU button
 buttons
ENTER button

  On-screen Display
Basic Operations 
(Settings)
1Press .
Note
•The  “Picture ” menu screen for the
selected input mode is displayed.
• The on-screen display shown on the 
right is displayed when INPUT 1 
mode is selected.
2Press  or  to select the
menu you want to adjust.
Note
• For details on the menus, see the 
tree charts on pages  34 and  35.
3Press  or  to select the
item you want to set.
Note
• Press  to return to the previous...

Basic Operation
-39
4Press .
•The cursor shifts to the sub menu.
5Press  or  to select the
setting of the item displayed in
the sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press 
 or
 to select “Ye s” or “OK” and then
press 
.
7Press .
•The menu will disappear.
Sub menu 

Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Selected Item Description button button
Contrast 
Bright 
Color 
Tint 
Sharp 
Red 
Blue 
CLR TempFor adjusting the contrast level
For adjusting the brightness of an image 
For adjusting the color intensity of the image 
For adjusting the tones of an image 
For making sharper or softer the contour of an image 
For adjusting the redness level 
For adjusting the blue level 
For adjusting the...

Basic Operation
-41
Progressive Mode
This function allows you to select the pro- 
gressive display of a video signal. The pro- 
gressive display projects a smoother video
image.
Select “Progressive Mode ” in the  “Pic-
ture ” menu  ➝ For settings, see page  38.
Note
• 2D Progressive
This function is useful to display fast- 
moving images such as sports and ac- 
tion films. This mode optimizes the im- 
age in a displayed frame.
•
 3D Progressive
This function is useful to display relatively 
slow-moving...

Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical st\
ripes or flickering in 
portions of the screen.
When Auto Sync is OFF
When “Auto Sync ” is  “OFF ”, interference
such as flickering or vertical stripes may oc- 
cur if displaying tilings or vertical stripes. 
Should this occur, adjust  “Clock ”,  “Phase ”,
“ H-Pos ” and  “V- Po s ” for obtaining an opti-
mum image.
Select  “Clock ”, “ Phase ”, “ H-Pos ” or  “V-
Pos ” in the  “Fine Sync ” menu  ➝ For...

Basic Operation
-43
Selecting Adjustment Settings
Adjustment settings stored in the projector 
can be easily accessed.
Select “Select Setting ” in the  “Fine
Sync ” menu  ➝  For details, see page  38.
Note
•If a memory position has not been set, a 
resolution and frequency setting will not 
be displayed.
• When selecting a stored adjustment set- 
ting with  “Select Setting ”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected 
and...

Auto Sync Adjustment
Used to automatically adjust a computer im- 
age.
Select “Auto Sync ” in the  “Fine Sync ”
menu  ➝ For settings, see page  38.
Note
When setting to  “ Normal” or
“
 High Speed ”:
• Auto Sync adjustment will occur when the 
projector is turned on or when the inputs 
are switched, when connected to a com-
puter.
Manual adjustments should be per-
formed: 
• When the optimum image cannot be 
achieved with Auto Sync adjustment. See
page  42.
• Auto Sync adjustment may take some
time to...

Easy to Use Functions
Easy to Use Functions 

46
Selecting the Picture Display Mode
Switching the Picture 
Display Using Different 
Input Signals
1Press .
•Each time  is pressed, the display
changes as sh own on page  4 7 .
Note
• In the Dot by Dot Mode, images are dis- 
played in the original resolution, therefore 
they will not be enlarged.
• To return to the standard image, press 
while  “RESIZE ” is displ ayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the 
input image. Depending on the...