Sharp Mx5001n Owners Manual
Have a look at the manual Sharp Mx5001n Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 SPECIFICATIONS Continuous copying speeds* * Copy speed during output of the second copy and following copies when performing continuous one-sided copying of the same page (excluding offset output) using plain one-sided paper from a tray other than the bypass tray. ModelMX-4100N/MX-4101N MX-5000N/MX-5001N Copy ratio100% / Reduced / Enlarged Copy modeColour copying Black and white copying Colour copying Black and white copying 11 x 17, A3, 8K19 copies/min. 19 copies/min. 22 copies/min. 22 copies/min. 8-1/2 x 14, 8-1/2 x 13, B422 copies/min. 22 copies/min. 25 copies/min. 25 copies/min. 8-1/2 x 11, A4, B5, 16K41 copies/min. 41 copies/min. 50 copies/min. 50 copies/min. 8-1/2 x 11R, 7-1/4 x 10-1/2R, A4R, B5R, 16KR 26 copies/min. 26 copies/min. 30 copies/min. 30 copies/min. Ambient environment 85% (Humidity) 60% 20% 10˚C (54˚F)30˚C (86˚F)35˚C (Temperature) (91˚F)
10 SPECIFICATIONS Acoustic noise emission (measurement according to ISO7779) Automatic document feeder specifications *1 Scanning in mono 2 mode of one side only is possible in fax and scan send modes. However, when the resolution is 600 x 600 dpi in Internet fax mode, the maximum length is 800 mm (31-31/64). When the resolution is 400 x 400 dpi or 600 x 600 dpi in scan mode, a long original cannot be scanned. *2 Paper weights from 35g/m 2 (9 lbs.) to 49g/m2 (13 lbs.) require the use of slow scan mode.MX-4100N/MX-4101N MX-5000N/MX-5001N Sound power level L wA Printing mode (continuous printing)Colour: 6.8B Black and white: 6.9BColour: 7.0B Black and white: 7.0B Standby mode5.1 B 5.3 B Sound pressure level L pA (actual measurement) Printing mode Bystander positionsColour: 53 dB (A) Black and white: 53 dB (A)Colour: 54 dB (A) Black and white: 53 dB (A) Operator positionsColour: 53 dB (A) Black and white: 52 dB (A)Colour: 52 dB (A) Black and white: 52 dB (A) Standby modeBystander positions36 dB (A) 38 dB (A) ModelMX-4100N/MX-5000N MX-4101N/MX-5001N Original sizes A3 to A5, 11 x 17 to 5-1/2 x 8-1/2, long paper (max. width 297 mm (11-5/8) x max. length 1000 mm*1 (39-23/64), scanning in mono 2 mode of one side only is possible in fax and image scan modes) Original weightOne-sided 35g/m2 to 128g/m2 (9 lbs. to 32 lbs.) Two-sided 50 g/m2 to 105g/m2 (13 lbs. to 28 lbs.)One-sided 35 g/m2 to 128g/m2 (9 lbs. to 32 lbs.) Two-sided 50 g/m2 to 128g/m2 (13 lbs. to 32 lbs.) Capacity100 sheets (80g/m2 (21 lbs.)) Maximum stack height of 13 mm (33/64)150 sheets (80g/m2 (21 lbs.)) Maximum stack height of 13 mm (33/64)
11 SPECIFICATIONS Exit tray unit (right tray) specifications * The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. Envelopes, tab paper, and glossy paper cannot be output. Stand/1x500 sheet paper drawer specifications ModelMX-TRX2 Output methodFace-down output Output capacity*100 sheets (using SHARP-recommended A4 or 8-1/2 x 11 paper) Dimensions When tray is folded up: 289 mm (W) x 405 mm (D) x 52 mm (H) (11-3/8 (W) x 15-61/64 (D) x 2-3/64 (H)) When tray is extended: 419 mm (W) x 405 mm (D) x 52 mm (H) (16-1/2 (W) x 15-61/64 (D) x 2-3/64 (H)) WeightApprox. 0.93 kg (2 lbs.) ModelMX-DEX8 Paper sizesA3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 8K, 16K, 16KR Paper weightPlain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)), heavy paper (106g/m2 to 209g/m2 (28lbs. bond to 110 lbs. index) ) Paper capacity500 sheets (80g/m2 (21 lbs.)) x 1 tray Paper typesSHARP-recommended plain paper, recycled paper, and coloured paper Automatic paper size detection When Auto-AB detection is selected: A3, B4, A4, A4R, B5, B5R, 216 mm x 330 mm (8-1/2 x 13) When Auto-Inch detection is selected: 11 x 17, 8-1/2 x 14, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R Power supplySupplied from the machine Dimensions720 mm (W) x 670 mm (D) x 303 mm (H) (28-11/32 (W) x 26-3/8 (D) x 11-15/16 (H)) (including adjuster) WeightApprox. 20 kg (44.1 lbs.)
12 SPECIFICATIONS Stand/2x500 sheet paper drawer specifications Large capacity tray specifications* * A stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer is required to connect the large capacity tray to the machine. ModelMX-DEX9 Paper sizesA3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 8K, 16K, 16KR Paper weightPlain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)), heavy paper (106g/m2 to 209g/m2 (28lbs. bond to 110 lbs. index) ) Paper capacity500 sheets (80g/m2 (21 lbs.)) x 2 tray Paper typesSHARP-recommended plain paper, recycled paper, and coloured paper Automatic paper size detection When Auto-AB detection is selected: A3, B4, A4, A4R, B5, B5R, 216 mm x 330 mm (8-1/2 x 13) When Auto-Inch detection is selected: 11 x 17, 8-1/2 x 14, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R Power supplySupplied from the machine Dimensions720 mm (W) x 670 mm (D) x 303 mm (H) (28-11/32 (W) x 26-3/8 (D) x 11-15/16 (H)) (including adjuster) WeightApprox. 23.5 kg (51.9 lbs.) ModelMX-LCX1 Paper sizesA4, 8-1/2 x 11 (paper size change must be performed by a service technician) Paper weightPlain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)) Paper capacity3500 sheets (80g/m2 (21 lbs.)) Paper typesSHARP-recommended plain paper, recycled paper, and coloured paper Power supplySupplied from the machine Dimensions370 mm (W) x 550 mm (D) x 520 mm (H) (14-9/16 (W) x 21-21/32 (D) x 20-15/32 (H)) WeightApprox. 29 kg (63.9 lbs.)
13 SPECIFICATIONS Finisher specifications *1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *2 Up to 10 envelopes can be output. *3 The height of the sheets must not exceed 71 mm (2-51/64). *4 The height of the sheets must not exceed 35.5 mm (1-13/32). *5 The maximum number of sheets for stapling assumes a paper weight of 90g/m 2 (24 lbs.) and includes two cover sheets of 106g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index). ModelMX-FNX9 Paper sizes A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 5-1/2 x 8-1/2R, 8K, 16K, 16KR Paper weight Thin paper (55g/m2 to 59g/m2 (15 lbs. to 16 lbs.)) plain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)) heavy paper (106 g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index)) , envelopes (75g/m2 to 90g/m2 (20 lbs. to 24 lbs.)) ModesNon-staple, staple Allowed paper sizes for offsetA3, B4, A4, A4R, B5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 8K, 16K Offset distance30 mm (1-3/16) Tray capacity*1 Non-stapling*2: 500 sheets*3 (A4, A4R, B5, B5R, A5R, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 5-1/2 x 8-1/2R, 16K, 16KR) 250 sheets* 4 (A3W, A3, B4, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8K)Stapling* 5: 30 sets or 500 sheets*3 (A4, A4R, B5, 8-1/2 x 11, 8-1/2 x 11R, 16K, 16KR) 30 sets or 250 sheets* 4 (A3, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8K) Power supplySupplied from the machine Dimensions640 mm (W) x 595 mm (D) x 205 mm (H) (25-3/16 (W) x 23-27/64 (D) x 8-5/64 (H)) (When tray is extended) WeightApprox. 13 kg (28.7 lbs.) Stapler section Allowed paper sizes for stapling A3, B4, A4, A4R, B5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 8K, 16K, 16KR (Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.) Maximum number of sheets for stapling*5 50 sheets (A4, A4R, B5, 8-1/2x 11, 8-1/2 x 11R, 16K, 16KR) 30 sheets (A3, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8K) (30 sheets when the sheets are the same width but different lengths.) Note: Special media such as transparency film and label sheets cannot be stapled or punched.
14 SPECIFICATIONS Finisher (large stacker) specifications*1 *1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher (large stacker) to the machine. *2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *3 Up to 100 sheets of non-standard size paper, envelopes, and transparency film (A4 (8-1/2 x 11)) can be loaded. *4 The maximum number of sheets for stapling assumes a paper weight of 90g/m 2 (24 lbs.) and includes two cover sheets of 106g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index). ModelMX-FN11 Paper sizes A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 5-1/2 x 8-1/2R, 8K, 16K, 16KR Paper weight Thin paper (55g/m2 to 59g/m2 (15 lbs. to 16 lbs.)) plain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)) heavy paper (106 g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index)) , envelopes (75g/m2 to 90g/m2 (20 lbs. to 24 lbs.)) ModesNon-staple, staple Allowed paper sizes for offsetA3, B4, A4, A4R, B5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 8K, 16K Offset distance30 mm (1-3/16) Tray capacity*2 Upper tray Non-stapling*3: 1550 sheets (A4, B5, A5R, 8-1/2 x 11, 5-1/2 x 8-1/2R, 16K) 650 sheets (A3W, A3, B4, A4R, B5R, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 8K, 16KR)Stapling*4: 100 sets or 1550 sheets (A4, B5, 8-1/2 x 11, 16K) 50 sets or 650 sheets (A3, B4, A4R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 8K) Lower tray Non-stapling*3: 2450 sheets (A4, B5, 8-1/2 x 11, 16K) 1700 sheets (A5R, 5-1/2 x 8-1/2R) 650 sheets (A3W, A3, B4, A4R, B5R, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2, 8K, 16KR)Stapling*4: 100 sets or 1550 sheets (A4, B5, 8-1/2 x 11, 16K) 50 sets or 650 sheets (A3, B4, A4R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 8K) Power supplySupplied from the machine Dimensions645 mm (W) x 645 mm (D) x 1100 mm (H) (25-25/64 (W) x 25-25/64 (D) x 43-19/64 (H)) (When tray is extended) WeightApprox. 45 kg (99.3 lbs.) Stapler section Allowed paper sizes for stapling A3, B4, A4, A4R, B5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 8K, 16K, 16KR (Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.) Maximum number of sheets for stapling*5 50 sheets (A4, B5, 8-1/2 x 11, 16K) 30 sheets (A3, B4, A4R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 8K) (30 sheets when the sheets are the same width but different lengths.) Note: Special media such as transparency film and label sheets cannot be stapled or punched.
15 SPECIFICATIONS Saddle stitch finisher specifications*1 *1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher (large stacker) to the machine. *2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *3 Up to 30 envelopes can be output. *4 The height of the sheets must not exceed 175 mm (6-57/64). *5 The height of the sheets must not exceed 94 mm (3-45/64). *6 The maximum number of sheets for stapling assumes a paper weight of 90g/m 2 (24 lbs.) and includes two cover sheets of 106g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index). *7 Allowed paper weights for saddle stitch stapling of plain paper include heavy paper (106g/m2 to 209g/m2 (28 lbs. bond to 110 lbs. index)). ModelMX-FN10 Paper sizes A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 5-1/2 x 8-1/2R, 8K, 16K, 16KR Paper weightThin paper (55g/m2 to 59g/m2 (15 lbs. to 16 lbs.)) plain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)) heavy paper (106 g/m2 to 256g/m2 (28 lbs. bond to 140 lbs. index)), envelopes (75g/m2 to 90g/m2 (20 lbs. to 24 lbs.)) ModesNon-staple, staple, saddle stitch, half fold (Output is folded in half one sheet at a time.) Allowed paper sizes for offsetA3, A4, A4R, B4, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 8K, 16K, 16KR Offset distanceWhen paper width is 196 mm(7-23/32) or more : 30 mm (1-3/16) When paper width is less than 196 mm (7-23/32) : 20 mm (25/32) or more Tray capacity*2 Non-stapling*3: 1000 sheets*4 (A4, A4R, B5, B5R, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 16K, 16KR) 500 sheets* 5 (A3W, A3, B4, A5R, 12 x 18, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 5-1/2 x 8-1/2R, 8K) Stapling*6: 50 sets or 1000 sheets*4 (A4, A4R, B5, B5R, 8-1/2 x 11, 8-1/2 x 11R, 16K, 16KR) 50 sets or 500 sheets* 5 (A3, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8K) Power supplySupplied from the machine Dimensions656 mm (W) x 631 mm (D) x 988 mm (H) (25-53/64 (W) x 24-27/32 (D) x 38-57/64 (H)) (When tray is extended) WeightApprox. 40 kg (88.2 lbs.) Stapler section Allowed paper sizes for staplingA3, B4, A4, A4R, B5, B5R, 11 x17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 8K, 16K, 16KR (Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.) Maximum number of sheets for stapling*6 50 sheets (A4, A4R, B5, B5R, 8-1/2 x 11, 8-1/2 x 11R, 16K, 16KR) 25 sheets (A3, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8K) (25 sheets when the sheets are the same width but different lengths.) Saddle stitch section Stapling methodFold in half and staple in two places on centreline Folding positionFold at centreline (can be adjusted with [Saddle Stitch Position Adjust] in the System Settings) Allowed paper sizes for saddle stitch staplingA3, B4, A4R, 11 x 17, 8-1/2 x 14, 8-1/2 x 11R, 8K, 16KR Allowed paper weights for saddle stitch stapling55g/m2 to 209g/m2 (15 lbs. bond to 110 lbs. index)*7 Number sheets for saddle stitch stapling / Number of setsMaximum: 15 sheets (80g/m2 (21 lbs.) x 14 sheets + 209g/m2 (110 lbs. index) x 1 sheet) / 10 sets (11 to 15 sheets), 15 sets (6 to 10 sheets), 20 sets (1 to 5 sheets) Note: Special media such as transparency film and label sheets cannot be stapled or punched.
16 SPECIFICATIONS Punch module specifications (for finisher) Punch module specifications (for finisher (large stacker)) ModelMX-PNX1A MX-PNX1B MX-PNX1C MX-PNX1D Hole punching2 holes 2 holes or 3 holes 4 holes 4 holes, broad width Allowed paper sizes for punching A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2, 8K, 16K, 16KR2 holes: 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2 3 holes: 11 x 17, 8-1/2 x 11, A3, A4A3, A4 A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2 Punchable paper weights55g/m2 to 128g/m2 (16 lbs. to 32 lbs.) Power supplySupplied from finisher Dimensions105 mm (W) x 518 mm (D) x 170 mm (H) (4-9/64 (W) x 20-25/64 (D) x 6-45/64 (H)) WeightApprox. 3.5 kg (7.7 lbs.) ModelMX-PNX6A MX-PNX6B MX-PNX6C MX-PNX6D Hole punching2 holes 2 holes or 3 holes 4 holes 4 holes, broad width Allowed paper sizes for punching A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2, 8K, 16K, 16KR2 holes: 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2 3 holes: 11 x 17, 8-1/2 x 11, A3, A4A3, A4 A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2 Punchable paper weights55g/m2 to 256g/m2 (16 lbs. Bond to 140 lbs.index) Power supplySupplied from finisher Dimensions115 mm (W) x 600 mm (D) x 995 mm (H) 4-17/32 (W) x 23-5/8 (D) 39-11/64 WeightApprox. 8 kg (17.7 lbs.)
17 SPECIFICATIONS Punch module specifications (for saddle stitch finisher) Keyboard specifications Printer specifications *1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer. *2 When the XPS expansion kit is installed. *3 Barcode font kit is required. *4 Supported operating systems are Windows 2000/XP/Vista. *5 To install the XPS expansion kit, an expansion memory board is required. ModelMX-PNX5A MX-PNX5B MX-PNX5C MX-PNX5D Hole punching2 holes 2 holes or 3 holes 4 holes 4 holes, broad width Allowed paper sizes for punching A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2, 8K, 16K, 16KR2 holes: 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2 3 holes: 11 x 17, 8-1/2 x 11, A3, A4A3, A4 A3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2 Punchable paper weights55g/m2 to 128g/m2 (16 lbs. to 32 lbs.) Power supplySupplied from saddle stitch finisher Dimensions122 mm (W) x 604 mm (D) x 248 mm (H) (4-13/16 (W) x 23-25/32 (D) x 9-49/64 (H)) WeightApprox. 3.5 kg (7.7 lbs.) Note: Special media such as transparency film and label sheets cannot be stapled or punched. ModelMX-KBX2 Power supplySupplied from the machine TypeBuilt-in Continuous printing speedSame as continuous copying speed (When printing same document continuously on A4 (8-1/2 x 11) plain paper in non-offset mode, excluding processing time.) Printing resolution600 x 600 dpi / 1200 x 1200 dpi Printer driver typePCL5c, PCL6, PostScript 3 compatible*1, XPS*2 Supported protocolsTCP/IP, IPX/SPX, NetBEUI, EtherTalk Supported client PC operating systemsSee VERIFYING SYSTEM REQUIREMENTS in the Software Setup Guide. FontsPCL5c, PCL6 80 European fonts, 28 barcode fonts*3, 1 bitmap font PostScript 3 compatible* 1136 European fonts Interface portLAN connectivity: 10Base-T / 100Base-TX / 1000Base-T USB connectivity: Supports USB 2.0 (Hi speed)*4 MemoryStandard system memory: 1 GB Expansion memory: 1 GB*5 Print areaEntire page excluding margin of 4.2 mm (11/64) at each edge. The actual print area may vary depending on the printer driver and the software application.
18 SPECIFICATIONS Network scanner / Internet Fax*1 specifications *1 Internet fax expansion kit is required. *2 Enhanced compression kit is required. *3 Total number of all destinations (Scan to E-mail, Scan to FTP, Scan to Desktop, Scan to Network folder, Internet Fax, Fax, and Group) Pull scan function (TWAIN) specifications TypeBuilt-in Scanning resolution (dpi) 100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600 Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi. Scanning speed MX-4100N/MX-5000N: Colour (A4 / 8-1/2 x 11) One-sided: 50 pages/min. (200 x 200 dpi), Two-sided: 16 pages/min. (200 x 200 dpi) Black and white (A4 / 8-1/2 x 11) One-sided: 50 pages/min. (200 x 200 dpi), Two-sided: 16 pages/min. (200 x 200 dpi) MX-4101N/MX-5001N: Colour (A4 / 8-1/2 x 11) One-sided: 70 pages/min. (200 x 200 dpi), Two-sided: 70 pages/min. (200 x 200 dpi) Black and white (A4 / 8-1/2 x 11) One-sided: 70 pages/min. (200 x 200 dpi), Two-sided: 70 pages/min. (200 x 200 dpi) Interface portLAN connectivity: 10Base-T / 100Base-TX / 1000Base-T Supported protocolsTCP/IP (IPv4) File formats Colour (including greyscale)File types: TIFF, JPEG, PDF, Encrypted PDF, XPS, Compact PDF*2 Compression ratio: High / Medium / Low Black and whiteFile types: TIFF, PDF, Encrypted PDF, XPS Compression modes: None / Medium (G3) / High (G4) Internet Fax (black and white only)File types: TIFF-FX (TIFF-F, TIFF-S) Compression modes: Medium (G3) / High (G4) Remarks Number of one-touch keys for storing destinations*3Maximum number of keys: 999 Number of destinations that can be stored in a group (1 key)* 3Maximum number of destinations in one group (1 key): 500 Scan destinationsScan to E-mail / Scan to FTP / Scan to Desktop / Scan to Network Folder Supported protocolTCP/IP (IPv4) Supported client PC operating systemsWindows 98 / Me / 2000 / XP / Server 2003 / Vista / Server 2008 Colour modesFull Colour, Greyscale, Mono Diffusion, Mono 2 gradation Resolution settings 75 dpi, 100 dpi, 150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi (The resolution can be specified by entering a numerical value from 50 to 9600 dpi. However, when a high resolution is specified, it is necessary to reduce the scanning area.) Scanning areaMaximum: A3 (11 x 17)