Sharp Mx M453n Owners Manual

5-84
SCANNER/INTERNET FAX
Contents
4
Specify the original size.
(1) Enter the original size.
 Touch the X (width) numeric value display key and 
enter the width.
 Touch the Y (height) numeric value display key and 
enter the height.
(A) To return the original size to the default size, touch the 
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the 
send size, touch the [Fit to Send Size] key. If you wish 
to scan the original at the entered original size, there 
is no need to...

5-85
SCANNER/INTERNET FAX
Contents
7
Touch the [Read-End] key.
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.
The ratio cannot be specified and Rotation Sending Setting cannot be selected.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
Read-EndConfigure
Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End]. 

5-86
SCANNER/INTERNET FAX
Contents
SCANNING MANY ORIGINALS AT ONCE
(Job Build)
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic 
document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that 
you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at 
once.
When scanning originals that are separated into sets, scan the set that...

5-87
SCANNER/INTERNET FAX
Contents
4
Select job build mode.
(1) Touch the [Job Build] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [START] key to scan the first set of originals.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Insert the next set of originals and press the [START] key.
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
7
Touch the...

5-88
SCANNER/INTERNET FAX
Contents
SCANNING ORIGINALS OF DIFFERENT 
SIZES (Mixed Size Original)
This feature lets you scan originals of different sizes at the same time; for example, B4 (8-1/2 x 14) size originals 
mixed together with A3 (11 x 17) size originals. When scanning the originals, the machine automatically detects the 
size of each original.
This feature can only be used with the following combinations of original sizes:
   
   
 x 17 and 8-1/2 x 14  x 17 and 8-1/2 x 13  x 17 and 5-1/2 x...

5-89
SCANNER/INTERNET FAX
Contents
4
Select the mixed size original setting.
(1) Touch the [Mixed Size Original] key so that 
it is highlighted.
(2) Touch the [OK] key.
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To 
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original] 
key again.
5
Press the [START] key.
Scanning begins. A beep will sound to indicate that scanning is...

5-90
SCANNER/INTERNET FAX
Contents
SCANNING THIN ORIGINALS
(Slow Scan Mode)
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Insert the originals face up in the 
document feeder tray.
Adjust the original guides slowly.
If the originals are inserted with too much force, they may crumple and...

5-91
SCANNER/INTERNET FAX
Contents
4
Select slow scan mode.
(1) Touch the [Slow Scan Mode] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
 When this function is selected, automatic 2-sided scanning is not possible.
 Rotate cannot be used when Mixed Size Original is enabled.
To cancel slow scan mode...
Touch the [Slow Scan Mode]...

5-92
SCANNER/INTERNET FAX
Contents
CHECKING THE NUMBER OF SCANNED 
ORIGINAL SHEETS BEFORE TRANSMISSION 
(Original Count)
The number of scanned original sheets can be counted and displayed before transmission. Checking the number of 
scanned original sheets before transmission helps prevent transmission mistakes.
 This function cannot be used in USB memory mode.
 The setting can be enabled separately for each mode.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the...

5-93
SCANNER/INTERNET FAX
Contents
5
Press the [START] key.
Scanning begins.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
6
When scanning ends, check the number 
of original sheets scanned and touch the 
[OK] key.
Transmission will begin.
 When Job Build mode is used, the confirmation message will 
appear after the [Read-End] key is touched.
 The message on the screen shows the number of sheets 
scanned in (A), and the number of pages (sheet...