Sharp Mx M453n Owners Manual

5-54
SCANNER/INTERNET FAX
Contents
AUTOMATICALLY SCANNING BOTH SIDES OF AN 
ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
☞IMAGE SETTINGS (page 5-53)
2
Specify the binding style of the 2-sided 
original (book or tablet) and the 
orientation in which the original is placed.
(1) Touch the [2-Sided...

5-55
SCANNER/INTERNET FAX
Contents
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND 
SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is A4 (8-1/2 x 11) and the send size is auto. For example, if the 
scan size is A4 (8-1/2 x 11) and the send size is B5 (5-1/2 x...

5-56
SCANNER/INTERNET FAX
Contents Specifying the original scan size (Specify using a standard size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original 
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
The automatically detected...

5-57
SCANNER/INTERNET FAX
Contents Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can 
be from 25 mm to 432 mm (1 to 17), and the height can be from 25 mm to 297 mm (1 to 11-5/8).
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
The automatically detected original size appears to the right...

5-58
SCANNER/INTERNET FAX
Contents
5
Touch the [OK] key.
The specified size appears in the [Scan Size] key.
 When the scan size is specified by numerical values, the send size cannot be specified.
 When the automatic document feeder is used, an original longer than 432 mm (17) can be scanned (maximum width 
1000 mm (39-3/8)). In this case, touch the [Long Size] key in the screen of step 3.
☞Specifying the original scan size (Specify using a standard size) (page 5-56)
☞TRANSMITTABLE ORIGINAL SIZES (page...

5-59
SCANNER/INTERNET FAX
Contents Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smaller than the scan size is selected, the image will be reduced.
 The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by 
numerical values.
 The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax...

5-60
SCANNER/INTERNET FAX
Contents
4
Specify the orientation in which the 
original is placed.
(1) Touch the appropriate [Image Orientation] 
key.
If this setting is not correct when sending an image with a 
changed ratio, a suitable image may not be transmitted.
(2) Touch the [OK] key.
The ratio used for reduction or enlargement of the original will appear between the Scan Size and the Send Size.
Scan/OriginalOK
A3Auto    A4Scan Size
2-Sided
Tablet2-Sided
Booklet
Send Size141%
Image Orientation
(1)
(2) 

5-61
SCANNER/INTERNET FAX
Contents
CHANGING THE EXPOSURE AND ORIGINAL IMAGE 
TYPE
The exposure and original image type can be set appropriately for the original to enable optimum scanning.
Refer the following tables to select appropriate settings.
How to select the exposure
How to select the original image type (Scan mode, USB memory mode and Data entry mode)
ExposureWhen to select
AutoThis setting automatically adjusts the exposure for light and dark parts of the original. (Only 
when mono2 is set.)...

5-62
SCANNER/INTERNET FAX
Contents
3
Scan mode, USB memory mode, Data entry mode
Internet fax mode
Select the exposure and original image 
type.
(1) Select the original image type.
Touch the original image type key that matches the 
original image type.
(2) Adjust the exposure with the   keys.
The exposure darkens when the   key is touched, 
and lightens when the   key is touched.
(3) Touch the [OK] key.
(1) Touch the [Manual] key.
(2) Adjust the exposure with the   keys.
The exposure darkens when the...

5-63
SCANNER/INTERNET FAX
Contents
CHANGING THE RESOLUTION
The resolution setting can be selected.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Resolution] key.
☞IMAGE SETTINGS (page 5-53)
2
Scan mode, USB memory mode, Data entry mode
Internet fax mode
Select the resolution.
(1) Touch the key of the desired resolution.
(2) Touch the [OK] key.
In Internet fax mode, the [Half Tone] key can be touched to select halftone (except...