Sharp MX M363N User Manual

5-14
SCANNER/INTERNET FAX
Contents Index display
Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using 
alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is 
convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] 
index when you store the destination.
The destinations can also be displayed in alphabetical...

5-15
SCANNER/INTERNET FAX
Contents
SCAN SEND SEQUENCE
This section explains the basic procedure for scanning and transmission. Select settings in the order shown below to 
ensure smooth transmission.
For the detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Place the original.
Place the original in the document feeder tray of the automatic 
document feeder, or on the document glass.
☞SENDING AN IMAGE IN SCAN MODE (page 5-28)
☞SENDING AN IMAGE IN USB...

5-16
SCANNER/INTERNET FAX
Contents
Special mode settings
Special modes can be selected.
☞SPECIAL MODES (page 5-71)
Start scanning and transmission
Start scanning and transmission.
If the original is placed on the document glass, follow these steps to start scanning and transmission:
(1) Press the [START] key.
(2) When scanning is finished, replace the original with the next original.
(3) Press the [START] key.
(4) Repeat (2) and (3) until all originals have been scanned.
(5) Touch the [Read-End] key....

5-17
SCANNER/INTERNET FAX
Contents
ORIGINAL SIZES
TRANSMITTABLE ORIGINAL SIZES
The following original sizes can be transmitted
* A long original can be transmitted. (When only scan destinations are selected for scan transmission or metadata transmission, 
scanning will take place in Mono2 at a resolution of 300X300dpi or less. When a resolution of 600X600dpi is used for Internet fax 
transmission, the maximum original size is 800 mm (31-1/2).)
THE SIZE OF THE PLACED ORIGINAL
When a standard size original...

5-18
SCANNER/INTERNET FAX
Contents
This section explains how to specify destination addresses, including selecting an address from the address book and 
retrieving an address by entering a search number.
RETRIEVING A DESTINATION FROM THE 
ADDRESS BOOK
The address book screen shows stored destinations as one-touch keys.
The destinations are displayed in order by search number.
The address book screen shows the destinations of all modes of the image send function. Each one-touch key shows 
the name of the...

5-19
SCANNER/INTERNET FAX
Contents
RETRIEVING A DESTINATION
A destination is retrieved by selecting its one-touch key.
1
Touch the [Address Book] key.
2
Specify the destination.
(1) Touch the index tab where the destination 
is stored.
(2) Touch the one-touch key of the desired 
destination.
If you select an incorrect destination, touch the key again 
to cancel the selection.
(3) Touch the [To] key.
This enters the selected destination.
 It is convenient to store frequently used destinations in the...

5-20
SCANNER/INTERNET FAX
Contents
CHECKING AND DELETING THE SELECTED 
DESTINATIONS
When multiple destinations have been selected, you can display and check the destinations. You can also delete a 
destination from the list (cancel selection of the destination).
1
Touch the [Address Review] key.
2
Check the destinations and then touch 
the [OK] key.
To check Cc or Bcc destinations, touch the corresponding tab.
To cancel selection of a destination...
Touch the one-touch key of the destination that you...

5-21
SCANNER/INTERNET FAX
Contents
USING A SEARCH NUMBER TO RETRIEVE 
A DESTINATION
A destination stored in the address book can be retrieved using the   key. This can be done in the base screen of any 
of the modes or in the address book screen.
1
Touch the   key.
2
Enter the 4-digit search number of the 
address with the numeric keys.
When the 4-digit search number is entered, the stored address 
is retrieved and specified as a destination.
 The search number is programmed when the destination is...

5-22
SCANNER/INTERNET FAX
Contents
ENTERING AN ADDRESS MANUALLY
Scan to E-mail, Internet fax, Network Folder and data entry mode addresses can be manually entered.
1
Display the address input screen.
(1) Touch the [Address Book] key in the base 
screen.
Before touching the [Address Entry] key in the base 
screen, touch the tab of the mode that you wish to use.
(2) Touch the [Address Entry] key.
2
Enter the destination address.
(1) Touch the key of the desired delivery 
method.
 Touch the [E-mail] key to...

5-23
SCANNER/INTERNET FAX
Contents
SPECIFYING A NETWORK FOLDER
A network folder on a server or computer connected to the same network as the machine can be directly specified. 
Select [Network Folder] in step 2 on the previous page and follow the steps below.
1
Touch the [Browse] key.
 To directly enter a folder, touch the [Folder Path] key. A 
text entry screen will appear.
 If a user name and password are required, check with 
the administrator of the server and enter the user name 
and password.
For...