Sharp MX M363N User Manual

5-4
SCANNER/INTERNET FAX
Contents
☞ SENDING AN IMAGE IN USB MEMORY MODE (page 5-35)
USB Memory Scan
The scanned file is sent to and stored in a USB memory device connected to the machine.
To use the Internet fax function, the Internet fax expansion kit must be installed.
☞ SENDING A FAX IN INTERNET FAX MODE (page 5-41)
Internet fax transmission
The scanned file is sent as an Internet fax. Reception of Internet faxes is also possible.
The machine supports Direct SMTP, which lets you directly send Internet...

5-5
SCANNER/INTERNET FAX
Contents
PREPARATIONS FOR USE AS A NETWORK 
SCANNER
MAKE SURE THE MAIN POWER SWITCH IS IN THE 
ON POSITION
The main power is on when the main power indicator on the right side of the operation panel is lit.
If the main power indicator is not lit, the main power is off. Switch the main power switch to the on position and press 
the [POWER] key ( ) on the operation panel.
If the Internet fax function will be used, and in particular if reception or timer transmission will take place...

5-6
SCANNER/INTERNET FAX
Contents
SETTINGS REQUIRED IN THE WEB PAGES
To use scan mode and Internet fax mode, the basic network scanner settings, server settings such SMTP and DNS 
server settings, and sender addresses must be configured in the Web pages.
Server settings
To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu. 
(Administrator rights are required.)
Basic network scanner settings
To configure network scanner settings, click [Application...

5-7
SCANNER/INTERNET FAX
Contents
STORING A DESTINATION FOR SCAN TO DESKTOP
To store your computer in the machine as a destination for Scan to Desktop, Network Scanner Tool must be installed 
from the Sharpdesk/Network Scanner Utilities CD-ROM that accompanies the machine. To scan an image to your 
computer, Network Scanner Tool must be running on your computer.
INSTALLING NETWORK SCANNER TOOL
To install Network Scanner Tool, see the Sharpdesk Installation Guide that accompanies the machine. When a...

5-8
SCANNER/INTERNET FAX
Contents
BEFORE SENDING TO A DIRECT SMTP ADDRESS
The machine supports Direct SMTP, which lets you directly send Internet faxes within your company without using a 
mail server. For the procedure for storing a Direct SMTP address in the address book, see STORING DESTINATION 
ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK (page 5-6). Stored Direct SMTP addresses are 
included in the address book for Internet fax mode. 
If the destination is busy
If the destination is busy, the...

5-9
SCANNER/INTERNET FAX
Contents
BASE SCREEN
Scan mode, USB memory mode, Internet fax mode, and PC scan mode are used by selecting operations and settings in 
the base screens of those modes. To display the base screen of a mode, touch the [IMAGE SEND] key in the touch 
panel and then touch the tab of the mode that you wish to use.
(1) Mode select keys
Use these keys to switch between copy, image send, and 
document filing modes.
To use scan mode, USB memory mode, Internet fax 
mode, PC scan mode, or...

5-10
SCANNER/INTERNET FAX
Contents
(7) Customized keys
The keys that appear here can be changed to show 
settings or functions that you prefer.
☞Customizing displayed keys (page 5-11)
(8) [Preview] key
Touch to check the image that will be sent in the touch 
panel before transmission.
☞CHECKING THE IMAGE TO BE TRANSMITTED 
(Preview) (page 5-69)
(9) [Resend] key/[Next Address] key
The destinations of the most recent 8 transmissions by Scan 
to E-mail, fax and/or Internet fax are stored. Touch this key 
to...

5-11
SCANNER/INTERNET FAX
Contents Customizing displayed keys
Special mode keys and other keys can be displayed in the base screen. Set these keys to functions that you frequently 
use to access the functions with a single touch. The customized keys are configured using Customize Key Setting in 
the Web pages. The following keys appear by factory default:
[Address Review] key
Touch this key to display a list of the destinations that have been selected in the address book. This is the same key 
as the...

5-12
SCANNER/INTERNET FAX
Contents
ADDRESS BOOK SCREEN
This screen is used to select transmission destinations.
(1) This shows the selected destination.
(2) Number of displayed items selector key
Touch this key to change the number of destinations 
(one-touch keys) displayed in the address book screen. 
Select 5, 10, or 15 keys.
(3) [Condition Settings] key
Touch this key to select transmission settings. When the 
key is touched, the base screen appears.
☞BASE SCREEN (page 5-9)
(4) [Address Review] key...

5-13
SCANNER/INTERNET FAX
Contents
CHANGING THE DISPLAY OF ONE-TOUCH KEYS IN 
THE ADDRESS BOOK SCREEN
You can show destinations of only a specific transmission mode in the address book screen, or change the displayed 
index tabs from the alphabetical tabs to the custom tabs . The procedure for selecting destinations does not change.
• Icons appear in the one-touch keys in the address book  to indicate which mode is used for transmission.
☞RETRIEVING A DESTINATION FROM THE ADDRESS BOOK  (page 5-18)
 For...