Sharp MX M260 User Manual

139
8
Chapter 8
PERIPHERAL DEVICES AND SUPPLIES
Optional equipments and supplies are explained in this chapter. To purchase optional equipment and supplies 
contact your authorised service representative.
PERIPHERAL DEVICES
*1Requires installation of the NETWORK SCANNER EXPANSION KIT (MX-NSX1).
*2Requires installation of the PRINTER EXPANSION KIT (MX-PB12).
*3Requires installation of the PRINTER EXPANSION KIT (MX-PB12), and 128MB or more of memory must be extended.
FINISHER (MX-FN13) See page 140....

140
PERIPHERAL DEVICES AND SUPPLIES
FINISHER (MX-FN13)
The finisher is equipped with the offset function, which offsets each set of output from the previous set.
In addition, each set of sorted output can be stapled.
Part names
The following parts can be accessed when the finisher is open.
(1) Offset tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for large output 
( A3, A4R, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13, 
8-1/2 x 11R, 7-1/4 x 10-1/2R sizes).
(2)...

141
PERIPHERAL DEVICES AND SUPPLIES
6
500-SHEET PAPER FEED UNIT/
2 x 500-SHEET PAPER FEED UNIT
These paper feed units provide the convenience of increased paper capacity for the machine and a greater choice of 
paper sizes readily available for copying.
The MX-DE10 contains one 500-sheet paper tray and the MX-DE11 contains two 500-sheet paper trays.
Part names
Specifications
MX-DE10 MX-DE11
PaperSizeB5 to A3 (8-1/2 x 11  to 11 x 17)
Weight56 g/m2 to 105 g/m2 (15 lbs. to 28 lbs.)
Paper 
capacityUpper...

142
PERIPHERAL DEVICES AND SUPPLIES
REVERSING SINGLE PASS FEEDER
The reversing single pass feeder (RSPF) can automatically feed multi-page documents.
If the RSPF is installed, two-sided originals can be copied automatically without having to manually turn them over.
Part names
Specifications
* When paper weight is 90 g/m2 (24 lbs.).
STORAGE OF SUPPLIES
Standard supplies for this product that are to be replaced by the user are paper and the toner cartridge.
PROPER STORAGE
Store the supplies in a location...

143
9
Chapter 9
APPENDIX
SPECIFICATIONS
ModelMX-M260 MX-M310
Ty p eDigital Multifunction System, Desktop
Photoconductive typeOPC drum
Document glass typeFixed
Copy systemDry, electrostatic transfer
OriginalsSheets, bound documents
Originals sizeMax. A3 (11 x 17)
Copy sizeMax. A3 (11 x 17)
Min. A6 (5-1/2 x 8-1/2)
Image loss: Max. 4 mm (5/32) (leading and trailing edges)
Max. 6 mm (11/64) (along other edges in total)
Copying speed 
(one-sided copying at 
100% copy ratio)14 copies/min. 11 x 17
15...

144
APPENDIX
*1 First copy time is measured with original on the document glass in full ready condition with fuser at operating temperature and 
mirror motor at operating speed, actual time may vary based on environment conditions.
*2 The warm-up time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
Dimensions (with RSPF)623 mm (W) x 628 mm (D) x 788 mm (H)
(24-17/32 (W) x 24-23/32 (D) x 31-1/64 (H))
Operating conditionsTemperature: 15°C to 30°C (59°F...

145
7
SPECIFICATIONS FOR NETWORK 
SCANNER
* Multiple e-mail addresses (up to 100) can be stored as a group. Note that this may reduce the maximum number 
of destinations (normally 200) that can be stored.
Scanning margins
When scanning an original, the area indicated in the 
following diagram cannot be scanned.Maximum original size A3 or 11 x 17
Optical resolution 400dpi
Output resolution 200, 300, 600dpi
Output modes 1bit/pixel
Halftone processing Error dispersion (200/300/600dpi)
File format File type:...

146
INDEX
Symbols
[#/P] key .......................................................11, 93, 94
2 - 8
2 x 500-sheet paper feed unit ................132, 139, 141
256MB expansion memory board ..........................139
[2-SIDED COPY] key ...................................22, 28, 29
500-sheet paper feed unit ......................132, 139, 141
512MB expansion memory board ..........................139
8MB fax memory ......................................................39
A
ABCDEF configuration...

147
Erase mode
- Centre erase .....................................................43
- Edge erase........................................................43
- Edge+centre erase............................................43
Erase width ..............................................................43
Error message........................................................117
Exit area .........................................................128, 142
Exposure adjustment...

148
Orientation of the original (Staple sort) ....................38
Original feed display.................................................22
Original guides .......................................................142
Original image type
- Photo ................................................................30
- Text ...................................................................30
- Text/photo .........................................................30
Original size...