Sharp Mx 2310u Owners Manual

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 55
 
10-D(7)
Copy/Scan low density image density 
adjustment (for each mode) 
(No need to adjust normally)
This adjustment is used to adjust the image density in the low den-
sity area in the copy/scanner mode.
This adjustment is required in the following cases.
* When there is a desire not to reproduce the background of the
document. When there is a desire to reproduce the low density
image of the document.
* When there is request from the user.
1) Enter the SIM...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 56
2) Select the mode to be adjusted with the scroll key.
*1: 20cpm machine: Disable without HDD.
3) Enter the adjustment value with 10-key. When the adjustment values of item A and C are changed, the
gamma at the line edge section is changed.
When the adjustment value is increased, the image contrast of
character edge and line edge is increased. When the adjust-
ment value is decreased, the image contrast of character and
line edge is decreased.
When the...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 57
 
10-D(9)
Monochrome (Copy/Scan/FAX) mode color 
document reproduction adjustment 
(No need to adjust normally)
Use to adjust the reproducibility for the red image and the yellow
image when printing color document that included the red/yellow
image in monochrome copy mode.
This adjustment is required in the following cases.
* When there is desire to change reproducibility of yellow/red
image in case of making a color copy of the color document in
monochrome copy...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 58
2) Select the AUTO MODE or the MANUAL MODE with the mode
key.
3) Select the mode to be adjusted with the scroll key.
4) Press the black ingredient amount select button.When reproduction as solid of black image is required: 
Selects + button
When there is desire to dar ken copy of black image: 
Selects + button
When a dark color image is reproduced in the black: 
Selects - button
5) Make a copy in color copy mode and check the copy.
If a satisfactory result is...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 59
1) Enter the SIM 46-60 mode.
2) Select the mode to be adjusted with the scroll key.
3) Input numeric value correspondi
ng to sharpness level (filter
process mode).
• Adjustment item A:
When selecting AUTO, filter is selected according to dot pat-
tern state automatically and adjusts sharpness.
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
• Adjustment item B: Select HIGH to obtain clear images. Select SOFT to...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 60
 
10-D(12)
Copy high density image density 
reproduction setting (Normally 
unnecessary to the setting change)
If a tone gap occurs on part of high density in copy mode, or if there
is necessity to increase the density of the part of high density,
change the setting.
This setting is normally not r equired. When, however, there are
case of following, change the setting.
* When a tone gap occurs on part of high density.
* When there is a necessity to incr ease the...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 61
 
10-D(13)
Copy color balance adjustment 
(Single color copy mode) 
(No need to adjust normally)
This adjustment is used to set the color balance and the density in
the single color copy mode to the users request.
The adjustment is made by changing Y, M, C components of each
color.
This adjustment is not required normally, but executed when there
is a request from the user.
When the default adjustment value is changed, this adjustment is
required in the...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 62
3) Enter the adjustment value with 10-key.
In case of increase of image density, input large numeric
value. Or in case of diluting the image density, input small
numeric value.
4) Press [OK] key.
5) Make a copy in the RSPF mode and check the copy.
If a satisfactory result is not obtained, return to the SIM 46-9 mode
and change the adjustment value.
Repeat the above procedures until a satisfactory result is obtained.
 
 
10-D (15)
Automatic color balance...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 63
 
10-D(16)
Copy gamma, color bala nce adjustment for 
each dither (Automatic adjustment)
a. General
This simulation is used to impr ove the image quality in a certain
mode. (Refer to the list in procedure 6.)
b. Adjustment procedures
1) Enter the SIM46-54 mode.
2) Press [EXECUTE] key.
A4/11 x 8.5 or A3/11 x 17 paper is automatically selected.
The color patch image (adjustment pattern) is printed.
3) Set the patch image (adjustment pattern) printed in the proce-...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 64
 
10-D(17) 
Dropout color adjustment 
(Normally not required.)
(26cpm/36cpm/31cpm(A) machine)
General (Purpose):
This adjustment is used to adjust the range of reproduction of color
document images as monochrom e images in the image send mode
(monochrome manual text mode).
In other words, it is used to adjust the level of chroma of color
images which are reproduced as monochrome images.
This adjustment must be performed in the following cases:
* When there is...