Sharp Mx 2310u Owners Manual

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 45
b. Adjustment procedure
YES
NO
YES
NO
NO
YES
Copy color balance and density adjustment (Manual adjustment) procedure
flowchart (SIM46-21) Start
Execute ADJ10C(2) (Copy color balance and density adjustment)
(Manual adjustment). (*1) Enter the SIM46-21 mode, and select A4 (11" x 8.5") paper.
(Automatic selection)
Press [EXECUTE] key.
(The adjustment check pattern is printed.)
Refer to the printed adjustment check pattern, and select a
target adjustment...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 46
1) Enter the SIM46-21 mode.
2) Press [EXECUTE] key. (A4/11 x 
8.5 or A3/11 x 17 paper is
automatically selected.)
The color balance adjustment pattern is printed.
3) Check that the following specific ation is satisfied or the color
balance is satisfactory.
If not, execute the following procedures.
The print density must be changed gradually from the lighter
level to the darker level. The density changing direction must
not be reversed.
The density level of each...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 47
(Normal end (Auto transition))
(Abnormal end (Auto transition))
After completion of the operation, the simulation is canceled.
This procedure is to save th
e copy color balance adjustment
data as the reference data for the halftone correction.
Immediately after execution of ADJ 10C (2) (Color balance
adjustment, Manual) with SIM 46-21, be sure to execute this
procedure.
When ADJ 10C (1) (Color balanc e adjustment, Auto) is exe-
cuted with SIM 46-24, this...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 48
 
10-DCopy / Image send / FAX image quality 
adjustment (Individual adjustment)
a. General
This adjustment is used to execute the fine adjustment in eac h mode only when a satisfactory image quality is not obtained by t he basic adjust-
ments ADJ 10B and ADJ 10C or there is a request from the  user. Normally there is no need to execute this adjustment.
In this adjustment, the adjustment result may be applied to the image send mode and the FAX mode as well as the...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 49
*1: Text Printed Photo / Copy document, Text Printed Photo only
*2: Printer RGB save 
 FAX resend only
*3: Printer RGB save only
*4: Only the watermark is related. 
*5: 26cpm/36cpm/31cpm(A) machine only
46-41 FAX send image density adjustment  (Normal text mode) - - ------
-
46-42 FAX send image density adjustment  (Fine text mode) - - ------
-
46-43 FAX send image density adjustment  (Super fine mode) - - ------
-
46-44 FAX send image density adjustment...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 50
 
10-D(1)
Color copy density adjustment (for each 
color copy mode) (separately for the low-
density area and the high-density area) 
(No need to adjust normally)
The density is adjusted in  each copy mode individually.
This adjustment must be performed in the following cases:
* When there is necessity to chan ge the copy density of the low
density and high density part at  each copy density individually.
* When there is necessity to ch ange the density gradient...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 51
3) Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
LOW mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select HIGH
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment  value is decreased, the copy
density is decreased.
4) Make a copy and check the adjustment...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 52
1) Enter the SIM 46-10 mode. 2) Select the copy mode to be adjusted with the mode key.
3) Select a color to change the adjustment value with the colorkey.
4) Select the density level (point) to be adjusted with the scroll key.
5) Enter the adjustment value with 10-key and press [OK] key. When the adjustment value is increased, the density is
increased. When the adjustment  value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the color...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 53
1) Enter the SIM 46-16 mode.
2) Select the density level (point) to be adjusted with the scroll
key.
3) Enter the adjustment value with 10-key and press [OK] key. When the adjustment value is increased, the density is
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the densities are collectively
adjusted.
That is, all the density levels (points) from the low density point
to the high density point can...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 54
PRESCAN: 
Once the densities on the document surface are scanned, the out-
put image density is determined according to the average of the
scanned densities. (The output image density is even for all the
surface.)
AE WIDTH FULL: 
Document density reading area in monochrome auto mode is 3 - 7
mm (leading edge of document) x Document width. No relationship
to PRESCAN MODE
AE WIDTH PART: 
Document density reading area in monochrome auto mode is 3 - 7
mm (leading...