Sharp Mx 2310u Owners Manual

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 35
1) Enter the SIM 63-8 mode. 2) Press [EXECUTE] key.
3) Press [YES] key.
The service color balance target and the color balance target for
the user color balance adjustment are set to the same color bal-
ance as the factory color balance target.
SET 1B Printer color balance adjustment target setup
• Color balance target for the  printer color balance adjustment
• Relationship between the factory target and the service target  and the color balance target for the...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 36
• Factory target in the printer color balance ad
justment (Automatic adjustment) (SIM 46-74/67-24)
By use of SIM 67-26, one of the following color ba lances can be set as the factory color balance target.
Each of the three color balances cannot be changed. (Fixed)
• Service color balance target in the printer color balance adjust- ment (Automatic adjustment) (SIM 46-74/67-24).
For the service color balance target, an optional color balance
can be adjusted with...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 37
2) Enter the SIM 67-27 mode.
3) Press [SETUP] key.
4) Set the color patch image (adjustment pattern) correctly
adjusted and printed in the printer color balance adjustment
(Manual adjustment) (SIM 67- 25) (ADJ 10E (2)) on the docu-
ment table.
A color patch image (adjustment pattern) printed by another
machine can be used.
Set the pattern so that the light density side is on the left side.
Place 5 sheets of white paper on the color patch image
(adjustment...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 38
b. Adjustment procedures
(Auto color balance adjustment by the serviceman)
Copy/printer color balance and density adjustment (Automatic adjustment)
(SIM46-74) procedure flowchart
Start
Execute ADJ10B Copy color balance and density/Printer color balance and density
adjustment (automatic density). (SIM46-74)
Set the adjustment pattern on the document table. Select the FACTORY target or the
SERVICE target, and press [EXECUTE] key.
(The adjustment pattern is...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 39
1) Enter the SIM46-74 mode.
2) Press [EXECUTE] key.
The high density process control is performed, and the copy
color patch image (adjustment pattern) is printed out. 
(A4/11 x 8.5 or A3/11 x 17  paper is automatically selected.)
3) Set the color patch image (adjustment pattern) paper printed in procedure 2) on the document table.
Set the color patch image (adjustment pattern) printed in the
procedure 2) on the document table. Place the color patch
image so that...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 40
6) Set the color patch image (adjustment pattern) printed in the
procedure 5) on the document table.
Set the color patch image (adjustment pattern) printed in the
procedure 2) on the document table. Place the color patch
image so that the fine lines are on the left side. At that time,
place 5 sheets of white paper on the printed color patch image
(adjustment pattern).
7) Select [FACTORY] target, and press [EXECUTE] key. When the color balance is customized with...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 41
10) When COMPLETED THIS PROCEDURE is displayed, the
adjustment operation is completed.
Cancel SIM46-74.
The adjustment result becomes valid only when the both
adjustments in the copy mode and in the printer mode are
completed.
For example, if the copy color balance adjustment (automatic
adjustment) is performed and the  simulation is canceled, the
adjustment result is invalid.
11) Check the copy color balance and density. (Refer to the item of the copy color...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 42
b. Adjustment procedure
(Auto color balance adjustment by the serviceman)
YES
NO
NO
YES
YESNO
Copy color balance and density adjustment (Automatic adjustment)
(SIM46-24) procedure flowchart
Start
Execute ADJ10C(1) Copy color balance and density adjustment
(automatic density).
Enter the SIM46-24 mode, and select A4 (11" x 8.5") paper.
(Automatic selection) Press [EXECUTE] key. (The adjustment pattern is printed.)
Set the adjustment pattern on the document...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 43
1) Enter the SIM 46-24 mode.
2) Press [EXECUTE] key. (A4/11 x 
8.5 or A3/11 x 17 paper is
automatically selected.)
The color patch image (adjustment pattern) is printed out.
3) Set the color patch image (adjustment pattern) paper printed in procedure 2) on the document table.
Place the printed color patch image (adjustment pattern) paper
on the document table so that the thin lines on the paper are
on the left side. Place 5 sheets of white paper on the printed...

MX-3610N  ADJUSTMENTS AND SETTINGS  4 – 44
6) Check the color balance and density.
(Refer to the item of the copy color balance and density
check.)
7) Use SIM44-26 to execute the halftone image correction.  (Forcible execution)
Enter the SIM44-26 mode and press [EXECUTE] key.
[EXECUTE] key is highlighted and the operation is started.
It takes several minutes to complete the operation. After com-
pletion of the operation, COMPLETE is displayed.
(Normal end (Auto transition))
(Abnormal end (Auto...