Sharp Mx 2300n Service Manual

MX-2300/2700 N/G  SIMULATION  7 – 45
 
43
 
43-1
Purpose: Setting
Function (Purpose): Used to set the fusing temperature in each
operation mode.
Section:Fusing
Item: Operation
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is...

MX-2300/2700 N/G  SIMULATION  7 – 46 
*1: Japan, China, AB-B
*2: U.S.A, Canada, Europe, U.K, Australia, Inch, AB_A
 
43-20
Purpose: Setting
Function (Purpose): Used to correct the environments of low
temperature and low humidity (L/L) for the
fusing temperature setting 1 for each paper
(SIM 43-01).
Section:Fusing
Item: Operation
Operation/Procedure
1) When the machine enters Simulation 43-20, the screen on the
right is displayed. (The current set value is displayed.)
2) Select the set item with [↑] and...

MX-2300/2700 N/G  SIMULATION  7 – 47 
 
43-21
Purpose: Setting
Function (Purpose): Used to perform correction of high temper-
ature and high humidity (H/H) environment
for the fusing temperature setting 1 (SIM
43-01) for each paper.
Section:Fusing
Item: Operation
Operation/Procedure
1) When the machine enters SIM 43-21, the following screen is
displayed. (The current set value is displayed.)
2) Select the set item with [↑] and [↓] buttons.The highlighted section of the set value is switched and dis-...

MX-2300/2700 N/G  SIMULATION  7 – 48 * WARMUP END TIME HH → 1s change by 1 count
The other correction values → 1°C change by 1 count

 
43-22
Purpose:Setting
Function (Purpose): Used to perform L/L (low temperature, low
humidity) correction for the fusing tempera-
ture setting 1 (SIM 43-04) for each paper.
Section:Fusing
Item: Operation
Operation/Procedure
1) When the machine enters Simulation 43-22, the following
screen is displayed. (The current set value is displayed.)
2) Select the set item with [↑]...

MX-2300/2700 N/G  SIMULATION  7 – 49 * PLAIN BW DUPCNT LL, PLAIN CL DUPCNT LL, HEAVY BW
DUP APCNT LL, HEAVY CL DUP APCNT LL → 1s change by 1
count
The other correction values → 1°C change by 1 count

 
43-23
Purpose: Setting
Function (Purpose): Used to perform H/H (high temperature,
high humidity) correction for the fusing tem-
perature setting 1 (SIM 43-04) for each
paper.
Section:Fusing
Item: Operation
Operation/Procedure
1) When the machine enters Simulation 43-23, the following
screen is displayed....

MX-2300/2700 N/G  SIMULATION  7 – 50
 
43-24
Purpose: Setting
Function (Purpose): Used to enter the correction values for SIM
43-1 and SIM 43-4 temperature correc-
tions.
Section:Fusing
Item: Operation
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted section of the set value is switched and dis-
played on the set setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the...

MX-2300/2700 N/G  SIMULATION  7 – 51
 
44
 
44-1
Purpose: Setting
Function (Purpose): Used to set whether the correction func-
tions of the image forming (process) sec-
tion are enabled or not.
Section:—
Item:—
Operation/Procedure
1) When the machine enters Simulation 44-01, the currently set
button is highlighted.
Set the item to be set to the normal display.
(Two or more items can be selected.) When an item is
selected, its button is highlighted. When the highlighted button
is pressed again, it returns...

MX-2300/2700 N/G  SIMULATION  7 – 52 
1) Adjust so that the LED light emitting quantity of BK/CL is the
target value ± 2.
* Target value
BK: Item B of SIM 44-04
CL: Item A of SIM 44-13
2) After completion of the adjustment, check the belt surface con-
dition with the BK sensor.


 
44-4
Purpose:Setting
Function (Purpose): Used to perform the correction operation of
the image forming section and to set the
process control sensor adjustment condi-
tions.
Section: Process
Item: Operation...

MX-2300/2700 N/G  SIMULATION  7 – 53 3) When [OK] button is pressed, the current set value is saved to
EEPROM and RAM.
* When [↑], [↓], [COLOR], or [BLACK] key is pressed, the cur-
rent set value is saved to EEPROM and RAM.

 
44-6
Purpose: Operation test/Check
Function (Purpose): Used to forcibly execute the correction in
the image process section (high-density
process correction) (process correction).
Section:Process
Item: Operation
Operation/Procedure
1) When the machine enters SIM 44-06, the screen...

MX-2300/2700 N/G  SIMULATION  7 – 54 [OTHER] button: Display of environment area, membrane
decrease correction steps and process control execution
counter, and model type.
* When [CLOSE] button is pressed, the display shifts to the copy
basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.

Mode Page number Display item (*: correction value) Content description Display rangeDefault 
value
CPY/PRN 1/2 P (PROCON) Left BLACK : GB ***/*** DV ***/*** High density process...