Sharp Mx 2300n Service Manual

MX-2300/2700 N/G  SIMULATION  7 – 35 Displays of Item A, D, G, J, K, O, R, S are Item name: Detail.
Example: PAPER: CS1
*: Refer to .

SUMMER 
TIMEStart  tim e 
settingD START TIME MONTH Start time MONTH 1  to 12 *
E START TIME DAY Start time DAY 1  to 31 * When the set value is changed, it is 
reflected to the START MODE. 
F START TIME WEEK Start time WEEK 1  to 5 *
G START TIME A DAY 
OF THE WEEKMONDAY Stat time DAY OF 
THE WEEK1*
TUESDAY 2
WEDNESDAY 3
THURSDAY 4
FRIDAY 5
SATURDAY 6
SUNDAY 7
H START...

MX-2300/2700 N/G  SIMULATION  7 – 36 
When the values of E to G (M to O) are changed and settled and
[OK] button is pressed, the values are saved to EEPROM and RAM
and set to Item J (R) at the same time.
 
26-69
Purpose: Setting
Function (Purpose): Used to set whether the toner preparation
message and the toner near end message
are displayed or not when the toner quan-
tity reaches 25%.
Section:Process
Item: Specifications
Operation/Procedure
1) Select an item to be set with [↑] and [↓] buttons.
The...

MX-2300/2700 N/G  SIMULATION  7 – 37 
 
27
 
27-1
Purpose: Operation test/Check
Function (Purpose): Used to set whether the detection of com-
munication error with RIC (U7-00) is dis-
abled or not.
Section: Communication (RIC/MODEM)
Item: Specifications (Operation mode)
Operation/Procedure
1) When the machine enters Simulation 27-01, following the
screen is displayed.
2) Enter the set value with 10-key.
3) When [OK] button is pressed, and the current set value is
saved to EEPROM and RAM.
After completion...

MX-2300/2700 N/G  SIMULATION  7 – 38 
 
27-5
Purpose: Setting
Function (Purpose): Used to set the tag number.
Section: Communication (RIC/MODEM)
Item: Data (User data)
Operation/Procedure
1) When the machine enters Simulation 27-05, the following
screen is displayed.
2) Enter the set value with 10-key. (Max. 8 digits)
The entered value is displayed on NEW.
* Press [C] key to clear the entered value.
3) When [SET] button is pressed, the entered value is set.
When the entered value is set, it is displayed...

MX-2300/2700 N/G  SIMULATION  7 – 39
 
27-7
Purpose: Setting
Function (Purpose): Used to set the FSS functions (enable, alert
callout).
Section: Communication (RIC/MODEM)
Item: Specifications
Operation/Procedure
1) When the machine enters the simulation, the following screen
is displayed.
2) Select an item to be set with [↑] and [↓] buttons.
The highlighted section of the set value is changed and the
value is displayed in the setting area.
* When there is an item over [↑], the display becomes active
and...

MX-2300/2700 N/G  SIMULATION  7 – 40
 
27-10
Purpose: Data clear
Function (Purpose): Used to clear the trouble prediction history
information.
Section: Communication (RIC/MODEM)
Item: Specifications
Operation/Procedure
1) Press [EXECUTE] button.
[EXECUTE] button is highlighted, and [YES] and [NO] buttons
become active display.
2) Press [YES] button.
The history information of the trouble prediction information is
cleared. [YES] button is highlighted.
* When [NO] button or [EXECUTE] button is pressed,...

MX-2300/2700 N/G  SIMULATION  7 – 41
 
27-13
Purpose: Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose): Used to display the history of paper feed
time between sensors.
Section:—
Item: Specifications
Operation/Procedure
1) When the machine enters Simulation 27-13, the following
screen is displayed.
* Select the display page of process data with [↓] and [↑] but-
tons.
* When there is an item over [↑], the display becomes active
and shifts to the previous page.
When there is...

MX-2300/2700 N/G  SIMULATION  7 – 42 3) When [OK] button is pressed, and the current set value is
saved to EEPROM and RAM.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
* When [CA] key or [SYSTEM SETTINGS] key is pressed to
exit the simulation, the machine is rebooted.

*: The FSS connection test can be changed only from Disable to
Enable, and cannot be changed from Enable to Disable. 
 
30
 
30-1
Purpose: Operation test/Check
Function (Purpose): Used to...

MX-2300/2700 N/G  SIMULATION  7 – 43
 
33
 
33-1
Purpose: Operation test/Check
Function (Purpose): Used to check the operations of the card
reader sensor and the related circuits. (The
card reader sensor operation can be moni-
tored with the LCD display.) (Japan only)
Section: Other
Item: Operation
Operation/Procedure
1) When the machine enters Simulation 33-01, the following
screen is displayed to show the sensor status change.
* When each sensor is turned ON, the corresponding sensor name
is...

MX-2300/2700 N/G  SIMULATION  7 – 44
 
41
 
41-1
Purpose: Operation test/Check
Function (Purpose): Used to display the operating state of the
document sensor.
Section: Other
Item: Operation
Operation/Procedure
1) When the machine enters Simulation 41-01, the following
screen is displayed to show the sensor status change.
* When each sensor is turned ON, the corresponding sensor
name is highlighted.

 
41-2
Purpose: Operation test/Check
Function (Purpose): Used to adjust the detection level of the...