Sharp Lc 46le814 Operation Manual

29
Operating an AQUOS LINK device
AQUOS	LINK	allows	you	to	operate	the	HDMI-connected	device	with	a	single	remote	control	unit.
 1Press I to start playback of a title.•	See	the	section	Top menu/title list	if	you	want	to	start	playback	using	the	list	of	the	titles	in	the	AQUOS	BD	player/AQUOS	recorder.
 2Press J to fast forward.
Press G to reverse.
Press H to stop.
Press F to pause.
Press SOURCE B to turn the HDMI-connected device on/off.
AQUOS LINK menu
You	can	select	the	AQUOS	LINK	menu	from	the	“Link...

30
Picture settings
Go to “Menu” > “Setup” > “Picture”.
Setup
AV mode Picture
OPC
[Off]
CH list
:Back
:Enter
Menu
Backlight
Contrast
Picture
AV mode
“AV	mode”	gives	you	several	viewing	options	to	choose	from	to	best	match	the	system	environment,	which	can	vary	due	to	factors	like	room-brightness,	type	of	programme	watched	or	the	type	of	image	input	from	external	equipment.
Press a/b to select the desired mode, and then press ;.•	You	can	also	switch	the	mode	on	the	“Picture”	and	“Audio”	menu	screen	by...

31
Picture
Advanced
This	TV	provides	various	advanced	functions	for	optimising	the	picture	quality.
Go to “Menu” > “Setup” > “Picture” > “Advanced”.
C.M.S.-hue
This	function	adjusts	the	hue	of	a	selected	colour	using	a	six-colour	adjustment	system.
C.M.S.-saturation
This	function	increases	or	decreases	the	saturation	of	a	selected	colour	using	a	six-colour	adjustment	system.
C.M.S.-value
This	function	adjusts	the	brightness	of	a	selected	colour	using	a	six-colour	adjustment	system.
Colour temp.
Adjusts...

32
Audio settings
Go to “Menu” > “Setup” > “Audio”.
Setup
Auto volume Audio
[Off]
STANDARD
CH list
:Back
:Enter
Menu
Audio
Auto volume
Different	sound	sources	sometimes	do	not	have	the	same	volume	level,	such	as	a	programme	and	its	commercial	breaks.	This	function	reduces	this	problem	by	equalizing	levels.
Item
High Strongly	reduces	the	volume	gaps	
among	different	sound	sources.
Middle
Low Slightly	reduces	the	volume	gaps	among	
different	sound	sources.
Off Does	not	adjust	the	volume	gaps.
Audio
Audio...

33
Power save settings
Go to “Menu” > “Setup” > “ECO”.
Setup
No signal off ECO picture control ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off[Disable] [Disable] [Off]
[On]
ECO
ECO picture control
This	function	automatically	detects	the	image	source	and	decreases	the	power	consumption	while	keeping	the	brightness	of	the	image	unchanged.
NOTE•	This	function	does	not	work	when	“AV	mode”	is	set	to	“DYNAMIC	(Fixed)”	or	“AUTO”.•	This	function	does	not	work	when	“Energy	save”	is	set	to	“Standard”	or...

34
Channel settings
Setup
Quick start Auto installation View setting
Channel settings
CH list
:Back
:Enter
Menu
Individual setting
View setting
Auto installation
The	TV	automatically	detects	and	stores	all	available	services	in	your	area.	This	function	also	allows	you	to	perform	the	channel	setting	for	digital,	satellite	and	analogue	individually	and	reconfigure	the	settings	after	the	initial	auto	installation	has	been	completed.
 1Go to “Menu” > “Setup” > “View setting” > “Auto installation”.
 2Press...

35
Basic adjustment
 EManual adjustConfigure	various	settings	for	each	service	using	the	colour	(R/G/Y/B)	buttons.
Service 
no.
Lock
Service 
nameLock
CH skip Old LCN
CH skipSortDelete
 1Press a/b to select the desired service.
 2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.•	The	✔	mark	indicates	the	operation	is	set	to	on.	Each	time	the	colour	button	is	pressed,	you	can	switch	the	corresponding	operation	on/off.
Buttons for “Manual adjust”...

36
Analogue setting
You	can	reconfigure	the	analogue	TV	channels	settings	automatically	or	manually.
 EAdditional searchUse	this	menu	to	add	new	services	automatically	after	“Analogue	search”	in	the	“Auto	installation”	menu	has	been	completed.•	Start	searching	channels	after	selecting	the	colour	system	and	sound	system.
 EManual adjustUse	this	menu	to	set	up	analogue	TV	channels	manually.
After selecting “Yes” on the screen, press a/b/c/d to select the channel you want to set and then press ;.
Fine
You...

37
Password/Lock settings
View setting
PIN
Allows	you	to	use	a	PIN	to	protect	certain	settings	from	being	accidentally	changed.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”.
NOTE•	PIN	input	is	required	when	executing	“PIN”.	The	default	PIN	is	“1234”.	To	clear	the	PIN	setting	(PIN	input	will	no	longer	be	needed),	refer	to	CLEARING THE PIN	(Page	59).
 EWhen selecting “Yes”Register	a	four-digit	password	number	to	use	the	“PIN”	function.
 1Press c/d to select “Yes”, and then press...

38
Basic adjustment
Language settings
View setting
Digital audio language
Set	up	to	three	preferred	multi	audio	languages	to	display	if	the	audio	languages	are	available.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
 ESwitching the multi audio languagesEach	time	you	press	7	on	the	remote	control	unit,	the	audio	language	switches.
View setting
Subtitle
Set	up	to	two	preferred	subtitle	languages	(including	subtitles	for	the	hearing	impaired)	to	display	if...