Sharp Lc 46le814 Operation Manual

19
Watching TV
Selecting an external video 
source
Once	the	connection	is	
made,	press	b	to	display	
the	“INPUT”	screen,	and	
then	press	b	or	a/b	
to	switch	over	to	the	
appropriate	external	source	
with	;.
NOTE•	You	can	also	select	an	
external	video	source	from	
“CH	list”	>	“INPUT”.
TV INPUT
Switchable
CH list
Selecting a sound mode
 EDTV/SAT modeIf	multi	sound	modes	are	received,	each	time	you	press	7	the	mode	switches	as	follows.
Audio (ENG)
STEREO
L/R LRLR
CH A CH BCH AB
Audio (ENG) CH A
Audio...

20
Watching TV
EPG
EPG	is	a	programme	list	that	is	displayed	on	the	screen.	With	the	EPG,	you	can	check	the	schedule	of	DTV/SAT/RADIO/DATA,	view	detailed	information	about	them,	tune	to	an	event	currently	on-air.
Useful settings for using EPG
Basic setting
View setting
EPG
If	you	want	to	use	the	EPG	for	digital	stations,	select	“Yes”.	The	EPG	data	must	be	automatically	captured	while	the	TV	is	in	standby	mode.	After	setting	to	“Yes”,	it	may	take	some	time	to	turn	off	the	power	using	the	remote	control...

21
Selecting a programme using EPG
Basic operation
The	illustrations	on	this	page	are	explained	using	three	digit	services.
 EDisplay/Close the EPG screen
Press EPG.
SelectEnterBackExit
AMPM
Programme info.Search by genre Search by dateTimer list
NOTE•	You	can	also	display	the	EPG	screen	from	“Menu”	>	“EPG”	>	“EPG”.
 ESelect a programme
 1Select the time span
Press c/d to select the time span you want to search.•	Continue	to	press	d	to	display	programmes	in	the	next	time	span.
 2Select the desired...

22
Watching TV
 6Display the timer list for TV programmes
Press B.•	Refer	to	page	22	for	the	timer	setup.
Timer setup using EPG
You	can	switch	to	a	programme	at	a	set	time.
 1Press EPG.
 2Press a/b/c/d to select the programme you want to set, and then press ;.
Back to EPGWatch No
Programme info.
Next
 3Press c/d to select “Watch”, and then press ;.•	If	you	select	“No”,	the	TV	returns	to	the	EPG	screen.
 4Press c/d to select “Yes”, and then press ;.•	The	selected	TV	programme	is	marked	with	an	icon....

23
Teletext
What is teletext?Teletext	broadcasts	pages	of	information	and	entertainment	to	specially	equipped	TV.	Your	TV	receives	teletext	signals	broadcast	by	a	TV	network,	and	decodes	them	into	graphical	format	for	viewing.	News,	weather	and	sports	information,	stock	exchange	prices	and	programme	previews	are	among	the	many	services	available.
Turning teletext on/off
 1Select a TV channel or external source providing a teletext programme.
 2Press m to display the teletext.•	Many	stations	use	the	TOP...

24
 EBefore connecting ...•	Be	sure	to	turn	off	the	TV	and	any	devices	before	making	any	connections.•	Firmly	connect	a	cable	to	a	terminal	or	terminals.•	Carefully	read	the	operation	manual	of	each	external	device	for	possible	connection	types.	This	also	helps	you	get	the	best	possible	audiovisual	quality	to	maximise	the	potential	of	the	TV	and	the	connected	device.•	Refer	to	page	50	for	connecting	a	PC	to	the	TV.
NOTE•	The	cables	illustrated	except	as	described	in	“(supplied	accessory)”	in	pages	24_26...

25
SCART connection
Example of connectable devices	
E VCR
	
E DVD	player/recorder


VCR Decoder
 
qSCART cable (supplied accessory)/Conversion 
cable
 
rSCART cable
NOTE•	In	cases	when	the	decoder	needs	to	receive	a	signal	from	the	TV,	make	sure	to	select	the	EXT	1	terminal	to	which	the	decoder	is	connected	in	“Manual	adjust”	in	the	“Analogue	setting”	menu	(Page	36).•	You	cannot	connect	the	VCR	with	decoder	using	a	fully	wired	SCART	cable	when	selecting	“Y/C”	under	“EXT	1”	in	the	“Input	select”	menu.
Y...

26
VIDEO connection
Example of connectable devices	
E VCR
	
E DVD	player/recorder
	
E Game	console
	
E Camcorder
You	can	use	the	EXT	2	terminal	when	connecting	to	a	game	console,	camcorder,	a	DVD	player/recorder	or	other	device.

 
uAV cable (supplied accessory)/Conversion cable
Audio connections
Speaker/amplifier connection
Connect	an	amplifier	with	external	speakers	as	shown	below.
 EConnecting an amplifier with digital/analogue audio inputs
DIGITAL AUDIO INAUX1 IN L
R


 
vOptical audio cable (for...

27
Controlling HDMI devices using AQUOS LINK
 EWhat is AQUOS LINK?Using	the	HDMI	CEC	protocol,	with	AQUOS	LINK	you	can	interactively	operate	compatible	system	devices	(AV	amplifier,	DVD	player/recorder,	Blu-ray	player/recorder)	using	a	single	remote	control	unit.
NOTE•	AQUOS	LINK-compatible	AQUOS	AUDIO	speaker	system	and	AQUOS	recorder	are	scheduled	to	be	on	sale	after	the	release	of	this	TV.•	AQUOS	LINK	does	not	work	while	using	time	shift	functions.
 EWhat you can do with AQUOS LINK
 ✔One touch...

28
Connecting an AQUOS BD player/AQUOS recorder via 
the AQUOS AUDIO speaker system

 
AQUOS BD player/AQUOS 
recorder
AQUOS AUDIO speaker system
 
nHDMI-certified cable 
oOptical audio cable
Connecting an AQUOS BD 
player/AQUOS recorder 
only

AQUOS BD player/AQUOS recorder
*	 The	ARC	(Audio	Return	Channel)	function	
works	only	when	using	the	HDMI	1	
terminal.
AQUOS LINK setup
Basic operation
Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set.
AQUOS LINK control...