Sharp Lc 46le814 Operation Manual

39
Time shift
This	function	enables	you	to	pause	the	digital	TV	or	satellite	programme	you	are	watching	and	start	watching	it	again	from	the	paused	scene.	This	function	is	available	only	for	the	924/824	model	series.
 1Press READY.•	The	TV	starts	temporary	recording	of	the	real	time	broadcast	in	the	background.•	Time shift recordable time is approximately 150 minutes for SD or 60 minutes for HD (depending on the programmes).
 2Press I.•	The	TV	shows	the	programme	from	the	scene	that	the	TV	started...

40
Useful viewing functions
Display information regarding time shift
Channel display
Channel	information	displays	by	pressing	p	on	the	remote	
control	unit.
Audio (ENG)STEREO
Video
Subtitle Off
>> New information
 
nThe time shift ready icon shows up when 
READY is pressed and the TV is recording the 
programme.
 
oThe status icon shows up depending on what is 
shown on the screen.
Counter
The	counter	displays	when	you	set	“On”	in	“Display	the	Time	
shift	memory”	(Go	to	“Setup”	>	“Option”	>	“Time	shift...

41
Selecting the picture size
Selecting the WSS picture size 
automatically
Option
WSS
The	“WSS”	allows	the	TV	to	switch	automatically	among	the	different	picture	size.
Go to “Menu” > “Setup” > “Option” > “WSS”.
NOTE•	Use	“Wide	mode”	if	an	image	does	not	switch	to	the	appropriate	picture	size.	When	the	broadcast	signal	contains	no	“WSS”	information,	the	function	will	not	work	even	if	enabled.
Selecting the WSS picture size 
manually
Option
4:3 mode
The	“WSS”	signal	has	4:3	auto-switching	that	allows	you...

42
Selecting the recording picture 
size manually
Option
REC picture size
You	can	use	this	menu	to	set	the	appropriate	picture	size	for	viewing	a	16:9	format	TV	programme	on	a	4:3	TV.
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “REC picture size”.
Setting to “4:3 TV”Setting to “16:9 TV”
NOTE•	This	function	must	be	set	before	recording.
Selecting the HDMI picture size 
automatically
Option
HDMI auto view
This	function	allows	you	to	automatically	change	to	the	appropriate	picture	size	when...

43
Display settings
Channel display
You	can	display	the	channel	information	by	pressing	p	on	the	remote	control	unit.
DTV modeATV mode
Audio (ENG)STEREOVideoSubtitleOff
>> New informationMONOAuto
Subtitle
SAT mode
Audio (ENG)STEREOVideoSubtitle Off
>> New information
	IFour	digit	numbers	(e.g.,	0001)	are	displayed	after	selecting	the	five	Nordic	countries	in	the	country	setting.	JSatellite	channels	are	displayed	by	four	digit	numbers	(e.g.,	0001).	KYou	can	set	four	satellite	stations	to	“SAT1”,	“SAT2“,...

44
Setting when using external 
devices
Input source settings
Option
Input select
For	setting	the	signal	type	of	external	equipment.
 1Press b to select the input source for setting the input signal (“EXT 1” or “EXT 3”) from the “INPUT” menu, and then press ;.
 2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.
Item
EXT 1 Y/C,
NOTE•	If no (colour) image displays, try changing to another signal type.•	Check	the	operation	manual	of	the	external	equipment	for	the	signal	type.
Option...

45
Additional features
Option
Colour system
You	can	change	the	colour	system	to	one	that	is	compatible	with	the	image	on	the	screen.
Go to “Menu” > “Setup” > “Option” > “Colour system”.
NOTE•	The	factory	preset	value	is	“Auto”.•	If	“Auto”	is	selected,	the	colour	system	for	each	channel	is	automatically	set.	If	an	image	does	not	display	clearly,	select	another	colour	system	(e.g.,	“PAL”,	“SECAM”).
Option
Headphone/Audio out select
You	can	select	which	device	is	used	for	outputting	audio.
Go to “Menu” >...

46
Connecting a USB device
Connect	a	USB	device	to	the	TV	as	shown	below.
•	The	TV	automatically	switches	to	the	USB	mode	when	a	USB	device	is	inserted	in	the	USB	terminal	(this	does	not	work	when	using	the	time	shift	function).•	Depending	on	the	USB	device,	the	TV	may	not	be	able	to	recognise	the	contained	data.•	Use	only	alphanumeric	characters	for	naming	files.•	File	names	over	80	characters	(may	vary	depending	on	the	character	set)	may	not	be	displayed.•	Do	not	disconnect	a	USB	device	or	memory	card...

47
Viewing enlarged photos
Buttons for enlarged photo display operation
ButtonsDescription
c/d (Cursor) Go
NOTE•	Rotating	photos	only	applies	to	the	temporarily	selected	item	and	this	setting	is	not	saved.
Slide show
 ESelecting the BGMSetup	the	slide	show	BGM	from	“Select	slide	show	BGM”	by	pressing	B	when	selecting	photo	thumbnails.	This	function	is	available	only	for	the	USB	mode.
Buttons for slide show BGM select operation
Buttons
Description
; When
NOTE•	Slide	show	BGM	will	be	reset	in	the	cases...

48
Music mode
*	This	screen	image	is	for	the	USB	mode.	It	may	be	slightly	different	in	the	Home	network	mode.
Buttons for music mode
ButtonsDescription
; When
*	This	function	is	available	only	for	the	USB	mode.
NOTE•	When	there	are	invalid	music	files,	the	g	mark	will	be	displayed	for	the	file.•	The	displayed	play	time	may	differ	slightly	from	the	actual	play	time	depending	on	the	files.
Video mode
Buttons for file selecting operations
Buttons
Description
; When
*	This	function	is	available	only	for	the...