Sharp Lc 46le814 Operation Manual

							29
Operating an AQUOS LINK device
AQUOS	LINK	allows	you	to	operate	the	HDMI-connected	device	with	a	single	remote	control	unit.
 1Press I to start playback of a title.•	See	the	section	Top menu/title list	if	you	want	to	start	playback	using	the	list	of	the	titles	in	the	AQUOS	BD	player/AQUOS	recorder.
 2Press J to fast forward.
Press G to reverse.
Press H to stop.
Press F to pause.
Press SOURCE B to turn the HDMI-connected device on/off.
AQUOS LINK menu
You	can	select	the	AQUOS	LINK	menu	from	the	“Link	operation”	menu	to	arrange	the	settings	for	sound	or	an	external	device.
Recorder power on/off
You	can	call	up	the	CEC-compatible	recorder’s	EPG	and	preset	timer	recordings	using	the	TV’s	remote	control	unit.
 1Press a/b to select “Recorder on/off”, and then press ;.•	The	external	input	source	switches	and	the	recorder’s	EPG	is	displayed.
 2Select the programme to record.•	Refer	to	the	operation	manual	of	the	recorder	for	details.
Top menu/title list
This	section	explains	how	to	play	back	a	title	in	the	AQUOS	BD	player/AQUOS	recorder.
 1Press a/b to select “Top menu/title list”, and then press ;.•	The	linked	recorder	now	powers	on	and	the	TV	automatically	selects	the	appropriate	external	input	source.•	The	title	list	data	from	the	connected	AQUOS	BD	player/AQUOS	recorder	displays.
 2Press @ to hide the menu screen to operate a/b/c/d buttons.
 3Select the title with a/b/c/d, and then press PLAY I.
Setup menu
You	can	call	up	the	menu	of	an	HDMI	CEC-compatible	external	device	(player,	recorder,	decoder,	etc.)	using	the	“Setup	menu”	function.
Press a/b to select “Setup menu”, and then press ;.
NOTE•	If	a	connected	device	does	not	have	this	function	or	the	device	is	in	a	status	where	the	menu	cannot	be	displayed	(recording,	entering	standby,	etc.),	this	function	may	not	be	available.
Media change
If	your	recorder	has	multiple	storage	media,	select	the	media	type	here.
 1Press a/b to select “Media change”, and then press ;.
 2Select the desired medium, such as DVD recorder or HDD. The media type changes every time you press ;.
Recorder EPG
You	can	call	up	the	CEC-compatible	recorder’s	EPG	and	preset	timer	recordings	using	the	TV’s	remote	control.
 1Press a/b to select “Recorder EPG”, and then press ;.•	The	external	input	source	switches	and	the	recorder’s	EPG	is	displayed.
 2Select the programme to record.•	Refer	to	the	operation	manual	of	the	recorder	for	details.
Change audio output device
By AQUOS audio SPYou	can	choose	to	listen	to	the	TV	sound	only	from	the	AQUOS	AUDIO	speaker	system.
Press a/b to select “By AQUOS audio SP”, and then press ;.•	The	sound	from	the	TV	speaker	and	headphone	terminal	is	silenced	and	only	the	sound	from	the	AQUOS	AUDIO	speaker	system	is	audible.•	Audio	description	sound	is	not	available.
By AQUOS SPYou	can	choose	to	listen	to	the	TV	sound	only	from	the	AQUOS	TV	speaker	system.
Press a/b to select “By AQUOS SP”, and then press ;.
Sound mode change
You	can	manually	change	the	AQUOS	AUDIO	speaker	system’s	sound	mode.
 1Press a/b to select “Sound mode change”.
 2The sound mode changes every time you press ;.•	Refer	to	the	operation	manual	of	the	AQUOS	AUDIO	speaker	system	for	details.
Model select
If	multiple	HDMI	devices	are	connected	in	a	daisy	chain,	you	can	specify	which	device	to	control	here.
Press a/b to select “Model select”, and then press ;. The HDMI device changes every time you press ;.
AQUOS LINK
  
						

							30
Picture settings
Go to “Menu” > “Setup” > “Picture”.
Setup
AV mode Picture
OPC
[Off]
CH list
:Back
:Enter
Menu
Backlight
Contrast
Picture
AV mode
“AV	mode”	gives	you	several	viewing	options	to	choose	from	to	best	match	the	system	environment,	which	can	vary	due	to	factors	like	room-brightness,	type	of	programme	watched	or	the	type	of	image	input	from	external	equipment.
Press a/b to select the desired mode, and then press ;.•	You	can	also	switch	the	mode	on	the	“Picture”	and	“Audio”	menu	screen	by	pressing	#.
Item
AUTO The
NOTE•	You	can	also	select	“AV	mode”	by	pressing	#.•	The	item	marked	with	*	is	available	only	when	selecting	“HDMI	1”,	“HDMI	2”,	“HDMI	3”,	“HDMI	4”	or	“EXT	3”	from	the	“INPUT”	menu.•	The	item	marked	with	**	is	available	only	when	accepting	an	“x.v.Colour”	signal	through	an	HDMI	terminal.•	If	you	select	“AUTO”,	some	selections	in	the	“AV	mode”	menu	may	not	be	automatically	set.
Picture
OPC
Automatically	adjusts	the	brightness	of	the	screen.
Item
Off The
NOTE•	When	set	to	“On”,	the	TV	senses	the	surrounding	light	and	automatically	adjusts	the	backlight	brightness.	Make	sure	no	object	obstructs	the	OPC	sensor,	which	could	affect	its	ability	to	sense	surrounding	light.
Picture
Picture adjustments
Adjusts	the	picture	to	your	preference	with	the	following	picture	settings.
Adjustment items
Selectable 
items c (Cursor)
d (Cursor)
Backlight The
Basic adjustment
  
						

							31
Picture
Advanced
This	TV	provides	various	advanced	functions	for	optimising	the	picture	quality.
Go to “Menu” > “Setup” > “Picture” > “Advanced”.
C.M.S.-hue
This	function	adjusts	the	hue	of	a	selected	colour	using	a	six-colour	adjustment	system.
C.M.S.-saturation
This	function	increases	or	decreases	the	saturation	of	a	selected	colour	using	a	six-colour	adjustment	system.
C.M.S.-value
This	function	adjusts	the	brightness	of	a	selected	colour	using	a	six-colour	adjustment	system.
Colour temp.
Adjusts	the	colour	temperature	to	give	the	best	white	image.
Item
High White
Scanning Backlight 200/Fine motion 
advanced
“Scanning	Backlight	200”	(only	for	the	924	model	series)	and	“Fine	motion	advanced”	(only	for	the	824	and	814	model	series)	technologies	provide	superior	solutions	for	digital	display	picture	quality	removing	motion	blur	(“Scan”	(Only	for	“Scanning	Backlight	200”),	“High”,	“Low”,	“Off”).
NOTE•	This	effect	is	greater	on	fast	moving	images.•	These	functions	will	have	no	effect	in	the	following	cases.1)	The	type	of	signal	received	is	a	PC	signal.2)	An	OSD	is	being	displayed.3)	Teletext	is	activated.•	If	images	appear	blurred,	set	to	“Off”.
Quad pixel plus
Reproduces	high-definition	images	with	higher	resolution.	This	function	is	available	only	for	the	924	model	series.
Gamma adjustment
Selects	the	tone	difference	of	the	brightness	and	darkness	of	the	image	according	to	the	type	of	programme	watched	from	a	maximum	of	e	2	to	a	minimum	of	f	2.
Film mode
Automatically	detects	a	film-based	source	(originally	encoded	at	24	or	25	frames	per	second,	depending	on	the	vertical	frequency),	analyses	it	and	then	recreates	each	still	film	frame	for	high-definition	picture	quality	(“Advanced	(High)”,	“Advanced	(Low)”,	“Standard”,	“Off”).
Active contrast
Automatically	adjusts	the	contrast	of	an	image	according	to	the	scene.
DNR
“DNR”	produces	a	clearer	image	(“Auto”,	“High”,	“Middle”,	“Low”,	“Off”).
NOTE•	This	function	may	not	be	available	depending	on	the	input	signal	type.
Monochrome
For	viewing	a	video	in	black	&	white.
Range of OPC
The	brightness	level	range	of	the	OPC	sensor’s	automatic	adjustments	can	be	set	according	to	your	preferences.	The	adjustment	range	of	the	OPC	sensor	can	be	set	to	a	maximum	of	e	16	and	a	minimum	of	f	16.
NOTE•	This	function	is	available	only	when	the	“OPC”	setting	is	set	to	“On”	or	“On:Display”.•	The	maximum	setting	cannot	be	set	to	a	smaller	number	than	the	minimum	setting.•	The	minimum	setting	cannot	be	set	to	a	bigger	number	than	the	maximum	setting.•	The	maximum	and	minimum	settings	cannot	be	set	to	the	same	number.•	Depending	on	the	brightness	of	the	surrounding	light,	the	OPC	sensor	might	not	operate	if	the	adjustment	range	is	small.
Basic adjustment
  
						

							32
Audio settings
Go to “Menu” > “Setup” > “Audio”.
Setup
Auto volume Audio
[Off]
STANDARD
CH list
:Back
:Enter
Menu
Audio
Auto volume
Different	sound	sources	sometimes	do	not	have	the	same	volume	level,	such	as	a	programme	and	its	commercial	breaks.	This	function	reduces	this	problem	by	equalizing	levels.
Item
High Strongly	reduces	the	volume	gaps	
among	different	sound	sources.
Middle
Low Slightly	reduces	the	volume	gaps	among	
different	sound	sources.
Off Does	not	adjust	the	volume	gaps.
Audio
Audio adjustment
You	can	adjust	the	sound	quality	to	your	preference	with	the	following	settings.
Item
c (Cursor) d (Cursor)
Treble For
Audio
Surround
This	function	allows	you	to	enjoy	realistic	live	sound.
Audio
Bass enhancer
This	function	allows	you	to	enjoy	bass-enhanced	sound.
Audio
Clear voice
This	function	emphasises	speech	against	background	noise	for	greater	clarity.
Audio
Audio description setting
This	function	allows	you	to	enable	output	of	audio	description	if	the	TV	receives	a	signal	including	audio	description.
NOTE•	When	the	“Audio	description”	is	set	to	“On”,	the	audio	description	sound	is	superimposed	on	the	main	audio	when	you	select	a	broadcast	compatible	with	audio	description.•	If	you	do	not	clearly	hear	the	sound	for	the	visually	impaired,	go	to	“Menu”	>	“Setup”	>	“Audio”	>	“Audio	description	setting”	>	“Mix	level”,	and	select	the	upper	level	to	turn	up	the	volume.•	This	function	is	available	only	for	DTV	broadcasts.	This	“Audio	description	setting”	menu	is	not	displayed	for	the	ATV	or	the	external	inputs.•	The	audio	description	sound	is	superimposed	on	the	main	audio	only	when	the	sound	is	output	on	the	speaker	sound	output,	headphone	sound	output	and	sound	for	audio	out	output.	The	sound	is	not	output	on	the	S/PDIF	sound	output	and	the	SCART	sound	output.•	This	function	is	not	available	for	the	AQUOS	Audio	speaker	system.•	This	function	does	not	work	during	time	shift	playback.
Setting audio input
Option
Audio select
When	using	the	EXT	3	terminal	or	HDMI	2	terminal,	you	must	select	which	terminal	uses	the	AUDIO	(R/L)	jack	for	analogue	audio	input.
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital) When
NOTE•	You	must	set	this	to	“HDMI+Analog”	when	connecting	devices	(including	a	PC)	with	an	HDMI-certified	cable	to	the	HDMI	2	terminal.	If	“HDMI	(Digital)”	is	set,	there	will	be	no	sound	output.
When selecting “EXT 3” from the “INPUT” menu
Item
Video When
NOTE•	You	must	also	set	“COMPONENT”	from	the	“Input	select”	menu	when	
selecting	 “EXT	3”	from	 the	“INPUT”	 menu	(Pages	 19	and	 44).
Basic adjustment
  
						

							33
Power save settings
Go to “Menu” > “Setup” > “ECO”.
Setup
No signal off ECO picture control ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off[Disable] [Disable] [Off]
[On]
ECO
ECO picture control
This	function	automatically	detects	the	image	source	and	decreases	the	power	consumption	while	keeping	the	brightness	of	the	image	unchanged.
NOTE•	This	function	does	not	work	when	“AV	mode”	is	set	to	“DYNAMIC	(Fixed)”	or	“AUTO”.•	This	function	does	not	work	when	“Energy	save”	is	set	to	“Standard”	or	“Advanced”.
ECO
Energy save
This	function	enables	you	to	reduce	the	backlight	brightness	in	order	to	decrease	the	power	consumption	and	increase	the	backlight	life	span	as	shown	in	the	following	table.
Item
Standard Reduces
NOTE•	This	function	does	not	work	when	“AV	mode”	is	set	to	“DYNAMIC	(Fixed)”.
 E“Energy save” status icons
Icon Description
“Energy	save”	is	set	to	“Standard”.
“Energy	save”	is	set	to	“Advanced”.
When	“Energy	save”	is	set	to	“Standard”	or	“Advanced”,	“Energy	save”	status	icons	appear	in	the	“Picture”	menu	and	channel	information	windows.
ECO
No signal off
When	set	to	“Enable”,	the	TV	will	automatically	enter	standby	mode	if	there	is	no	signal	input	for	15	minutes.
NOTE•	Even	if	a	TV	programme	finishes,	this	function	may	not	operate	because	of	interference	from	other	TV	stations	or	other	signals.
ECO
No operation off
The	TV	will	automatically	enter	standby	mode	if	no	operations	are	performed	in	three	hours	if	“Enable”	is	selected.
NOTE•	Five	minutes	before	the	TV	enters	standby	mode,	the	remaining	time	displays	every	minute.
ECO
Sleep timer
Allows	you	to	set	 a	time	 when	 the	TV	automatically	 enters	standby	mode.	You	can	set	the	time	span	for	entering	standby	mode	after	selecting	“Change”.
NOTE•	Select	“Off”	to	cancel	the	sleep	timer.•	When	the	time	has	been	set,	countdown	automatically	starts.•	Five	minutes	before	the	preset	of	time	expires,	the	remaining	time	displays	each	minute.
ECO
Audio only
When	listening	to	music	from	a	music	programme,	you	can	set	the	TV	off	and	enjoy	audio	only.
Item
On Audio
Basic adjustment
  
						

							34
Channel settings
Setup
Quick start Auto installation View setting
Channel settings
CH list
:Back
:Enter
Menu
Individual setting
View setting
Auto installation
The	TV	automatically	detects	and	stores	all	available	services	in	your	area.	This	function	also	allows	you	to	perform	the	channel	setting	for	digital,	satellite	and	analogue	individually	and	reconfigure	the	settings	after	the	initial	auto	installation	has	been	completed.
 1Go to “Menu” > “Setup” > “View setting” > “Auto installation”.
 2Press c/d to select “Yes”, and then press ;.
 3Press a/b/c/d to select the desired language, and then press ;.
NOTE•	PIN	input	is	required	when	executing	“Auto	installation”.	The	default	PIN	is	“1234”.	To	change	the	PIN	setting,	refer	to	Password/Lock settings	(Page	37).	To	clear	the	PIN	setting	(PIN	input	will	no	longer	be	needed),	refer	to	CLEARING THE PIN	(Page	59).•	You	cannot	set	the	Home/Store	setting	and	the	country	setting	in	“Auto	installation”	in	the	“Setup”	menu.	If	you	want	to	reconfigure	those	settings,	automatically	execute	initial	auto	installation	after	executing	“Reset”	from	the	“Setup”	menu.•	The	current	country	setting	is	displayed	on	the	screen.
 4Press a/b to select the broadcast standard you want to search, and then press ;.
 EDigital search
After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital broadcast setting on pages 13_14.
 EAnalogue search
The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 14.
 ESatellite search
After selecting “Satellite search”, the current DVB-S/S2 setting screen is displayed. Refer to the “Satellite search” setting on pages 15_16.
NOTE•	After	selecting	“Next”	in	the	DVB-S/S2	setting	screen,	you	need	to	select	your	preferred	satellite	broadcast	to	start	searching.
View setting
Programme setup
You	can	reconfigure	the	DTV	service	settings	automatically	or	manually.
 1Go to “Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.
 2Press a/b to select the broadcast standard you want to reconfigure, and then press ;.
NOTE•	PIN	input	is	required	when	executing	“Programme	setup”.	The	default	PIN	is	“1234”.	To	change	the	PIN	setting,	refer	to	Password/Lock settings	(Page	37).	To	clear	the	PIN	setting	(PIN	input	will	no	longer	be	needed),	refer	to	CLEARING THE PIN	(Page	59).
Digital setting
Terrestrial
You	can	reconfigure	the	following	settings	when	you	select	“Terrestrial”	in	the	initial	auto	installation	or	the	“Auto	installation”	menu.
 EAdditional searchUse	this	menu	to	add	new	services	automatically	after	“Digital	search”	in	the	“Auto	installation”	menu	has	been	completed.
 EManual searchAdd	new	services	within	a	specified	frequency	band.•	Enter	the	frequency	using	0_9	numeric	buttons.•	You	can	perform	“Manual	search”	with	a	service	number	only	when	the	five	Nordic	countries	have	been	selected	in	the	country	setting.
Basic adjustment
  
						

							35
Basic adjustment
 EManual adjustConfigure	various	settings	for	each	service	using	the	colour	(R/G/Y/B)	buttons.
Service 
no.
Lock
Service 
nameLock
CH skip Old LCN
CH skipSortDelete
 1Press a/b to select the desired service.
 2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.•	The	✔	mark	indicates	the	operation	is	set	to	on.	Each	time	the	colour	button	is	pressed,	you	can	switch	the	corresponding	operation	on/off.
Buttons for “Manual adjust” operation
Lock
Press	R	button.
When	the	service	is	locked,	you	must	enter	your	
PIN	whenever	you	tune	to	the	service.
CH skipPress	G	button.
Services	with	a	✔	mark	are	passed	over	when	
pressing	:r/s	on	the	TV	or	remote	control	unit.
DeletePress	Y	button.
The	selected	service	is	deleted.	If	you	want	to	
watch	the	service	you	deleted	once	again,	perform	
“Auto	installation”,	“Additional	search”,	or	“Manual	
search”.
SortPress	B	button.
The	item	position	of	services	can	be	sorted.	
1Press	a/b	to	select	the	service	whose	
item	position	you	want	to	move,	and	then	
press	;.
	
2Press	a/b to	move	it	to	the	desired	
position,	and	then	press	;.
	
3Repeat	steps	1	and	2	until	all	desired	
service	items	are	sorted.
Cable
You	can	reconfigure	the	following	settings	when	you	select	“Cable”	in	the	initial	auto	installation	or	the	“Auto	installation”	menu.
 EAdditional searchUse	this	menu	to	add	new	services	automatically	after	“Digital	search”	in	the	“Auto	installation”	menu	has	been	completed.	Follow	steps	1	to	5	in	Searching for cable broadcasts	on	page	14.
 EManual searchAdd	new	services	within	a	specified	frequency	band.	After	setting	the	items	on	the	following	screen,	the	TV	starts	searching.•	Refer	to	the	table	about	menu	items	in	the	right	column	on	page	14.
Frequency
Symbol rate
QAM modulation
Search start
MHz
 EManual adjustThis	function	is	the	same	as	in	“Terrestrial”.	Refer	to	“Manual	adjust”	in	“Terrestrial”.
H•	You	can	only	reconfigure	the	“Manual	adjust”	settings.•	You	can	only	set	the	“Lock”	setting	in	“Manual	adjust”.
Satellite setting
Before	selecting	the	type	of	search	in	“Satellite	setting”,	you	need	to	select	the	satellite	broadcast.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
 EAdditional searchUse	this	menu	to	add	new	services	automatically	after	auto	installation	has	been	completed.	Follow	steps	1	to	6	in	the	right	column	on	page	15.
 EManual searchAdd	new	services	within	a	specified	frequency	band.	After	setting	the	items	on	the	following	screen,	select	“Yes”	from	“Search	start”	menu.
Band [Vert/Low]Frequency
Symbol rate
Search start
Vert/High
Horiz/Low
Horiz/High
Vert/Low
 EManual adjustThis	function	is	the	same	as	in	“Digital	setting”.	Refer	to	“Manual	adjust”	in	“Digital	setting”.
Downloaded From TV-Manual.com Manual•  
						

							36
Analogue setting
You	can	reconfigure	the	analogue	TV	channels	settings	automatically	or	manually.
 EAdditional searchUse	this	menu	to	add	new	services	automatically	after	“Analogue	search”	in	the	“Auto	installation”	menu	has	been	completed.•	Start	searching	channels	after	selecting	the	colour	system	and	sound	system.
 EManual adjustUse	this	menu	to	set	up	analogue	TV	channels	manually.
After selecting “Yes” on the screen, press a/b/c/d to select the channel you want to set and then press ;.
Fine
You	can	adjust	the	frequency	to	the	desired	position.
NOTE•	Adjust	while	checking	the	background	picture	as	a	reference.•	Instead	of	pressing	c/d	to	adjust	the	frequency,	you	can	set	by	directly	entering	the	frequency	number	of	the	channel	with	0_9	numeric	buttons.
EXAMPLE•	179.25	MHz:	Press	1	>	7	>	9	>	2	>	5.•	49.25	MHz:	Press	4	>	9	>	2	>	5	>	;.
Colour sys.
Select	the	optimum	colour	system	to	receive	(“Auto”,	“PAL”,	“SECAM”).
Sound sys.
Select	the	optimum	sound	systems	(broadcasting	systems)	to	receive	(“B/G”,	“D/K”,	“I”,	“L/L’”).
Label
When	a	TV	channel	sends	its	network	name,	the	“Auto	installation”	detects	the	information	and	assigns	a	name	to	it.	However,	you	can	change	channel	names	individually.
Select each character of the new name for the channel with using the software keyboard (Page 7).
NOTE•	The	name	can	be	five	characters	or	less.
Skip
Channels	with	“Skip”	set	to	“On”	are	passed	over	when	using	:r/s	even	if	selected	while	watching	the	image	from	the	TV.
Decoder
When	connecting	 a	decoder	 to	the	 TV,	you	 need	 to	select	“EXT	1”.
NOTE•	The	factory	preset	value	is	“Off”.
Lock
You	can	block	the	viewing	of	any	channel.
NOTE•	See	“PIN”	for	setting	a	PIN.•	When	“Lock”	is	set	to	“On”	for	a	channel,	“Child	lock	has	been	activated”	displays,	and	the	image	and	sound	of	the	channel	are	blocked.•	When	pressing	6	while	“Child	lock	has	been	activated”	displays,	the	PIN	input	window	will	display.	Inputting	the	correct	PIN	unlocks	the	“PIN”	temporarily	until	the	power	is	turned	off.
 ESortChannel	positions	can	be	sorted	freely.
 1Press c/d to select “Yes”, and then press ;.
 2Press a/b/c/d to select the channel you want to move, and then press ;.
 3Press a/b/c/d to move it to the desired position, and then press ;.
 4Repeat steps 2 and 3 until all desired channels are sorted.
 EErase programmeChannels	can	be	erased	individually.
 1Press c/d to select “Yes”, and then press ;.
 2Press a/b/c/d to select the channel you want to erase, and then press ;.•	A	message	window	pops	up.
 3Press c/d to select “Yes”, and then press ; to erase the selected channel. All the subsequent channels move up.
 4Repeat steps 2 and 3 until all desired channels are erased.
Basic adjustment
  
						

							37
Password/Lock settings
View setting
PIN
Allows	you	to	use	a	PIN	to	protect	certain	settings	from	being	accidentally	changed.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”.
NOTE•	PIN	input	is	required	when	executing	“PIN”.	The	default	PIN	is	“1234”.	To	clear	the	PIN	setting	(PIN	input	will	no	longer	be	needed),	refer	to	CLEARING THE PIN	(Page	59).
 EWhen selecting “Yes”Register	a	four-digit	password	number	to	use	the	“PIN”	function.
 1Press c/d to select “Yes”, and then press ;.
 2Enter the four-digit number as a PIN using 0_9 numeric buttons.
 3Enter the same four-digit number as in step 1 to confirm.•	“The	system	PIN	has	been	changed	successfully”	displays.
 4Press ;.
NOTE•	To	view	a	locked	channel,	you	must	enter	the	PIN	(see	pages	35	and	36	for	locking	channels	from	viewing	in	DTV,	SAT	and	ATV	mode).	When	you	select	a	locked	channel,	a	PIN	prompt	message	pops	up.	Press	6	to	display	the	PIN	input	window.
 EWhen selecting “No”Allows	you	to	reset	your	PIN.
Press c/d to select “Yes”, and then press ;.
NOTE•	As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.
View setting
Parental rating
This	function	allows	DTV	services	to	be	restricted.	It	prevents	children	from	watching	violent	or	sexual	scenes	that	may	be	harmful.
 1Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Parental rating”.
 2Repeat steps 1 to 4 in when selecting “Yes” to the left.
NOTE•	“Universal	viewing”	and	“Parental	approval	pref.”	are	ratings	used	exclusively	in	France.•	Refer	to	page	68	for	details	about	ratings.
Option
Key lock
This	function	allows	you	to	lock	the	buttons	on	the	TV	or	remote	control	unit	in	order	to	prohibit	children	from	changing	the	channel	or	volume.
Go to “Menu” > “Setup” > “Option” > “Key lock”.
Item
Off Unlocks
NOTE•	You	cannot	set	both	“RC	control	lock”	and	“Button	control	lock”	at	the	same	time.
 ECancelling the lockPress	@	on	the	TV	and	set	to	“Off”	to	cancel	the	“RC	control	lock”.	Press	@	on	the	remote	control	unit	and	set	to	“Off”	to	cancel	the	“Button	control	lock”.•	Refer	to	page	 7	for	 menu	 operation	 using	@-	on	 the	 front	of	the	TV.
Basic adjustment
  
						

							38
Basic adjustment
Language settings
View setting
Digital audio language
Set	up	to	three	preferred	multi	audio	languages	to	display	if	the	audio	languages	are	available.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
 ESwitching the multi audio languagesEach	time	you	press	7	on	the	remote	control	unit,	the	audio	language	switches.
View setting
Subtitle
Set	up	to	two	preferred	subtitle	languages	(including	subtitles	for	the	hearing	impaired)	to	display	if	subtitles	are	available.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Subtitle”.
Selectable items	
E 1st language
	
E 2nd language
	
E For hearing impaired
 ESwitching subtitle languagesEach	time	you	press	[	on	the	remote	control	unit,	the	subtitle	switches.
Off 1st language
2nd language
 ESet “For hearing impaired” to “Yes”Subtitles	for	the	hearing	impaired	have	priority	over	each	of	the	subtitle	language	settings	(e.g.,	“1st	language”,	“2nd	language”,	etc.).
EXAMPLE
1st language
(For hearing impaired) 1st language
NOTE•	Subtitles	will	not	be	displayed	when	the	programme	does	not	contain	subtitle	information.
View setting
Language
You	can	select	an	OSD	language	from	among	23	languages.	Refer	to	the	OSD language	column	in	the	specification	table	for	the	selectable	languages	(Page	65).
Go to “Menu” > “Setup” > “View setting” > “Language”.
Useful settings
View setting
Quick start
You	can	reduce	the	TV’s	start-up	time	after	turning	on	the	power	with	the	remote	control	unit.
Go to “Menu” > “Setup” > “View setting” > “Quick start”.
Item
On The
Downloaded From TV-Manual.com Manual•