Sharp Lc 46le814 Operation Manual
Have a look at the manual Sharp Lc 46le814 Operation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
59 Troubleshooting ProblemPossible solution• No power.• Turn on (;) the MAIN POWER switch on the rear of the TV (Page 5).• Is the AC cord disconnected?• Check if you pressed “Setup” > “Audio” > “Audio description setting” > “Mix level”, and select the upper level to turn up the volume (Page 32).• Make sure that headphones are not connected.• Check if you pressed e on the remote control unit.• Is the proper item selected in the “Audio select” menu when connecting devices to the HDMI 2 terminal or the EXT 3 terminal? (Pages 24, 25 and 32)• The TV sometimes makes a cracking sound.• This is not a malfunction. This happens when the cabinet slightly expands and contracts according to changes in temperature. This does not affect the TV’s performance. CLEARING THE PIN 1Go to “Menu” > “Setup”. 2Press a/b to select “Auto installation”, “Programme setup”, “PIN”, “Parental rating” or “Reset”, and then press ;. The PIN input window will display. 3Press and hold both :r and i+ on the TV simultaneously until the message appears on the screen. NOTE• The PIN is also available for the Net TV function. ResetIf complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1Go to “Menu” > “Setup” > “View setting” > “Reset”. 2Press c/d to select “Yes”, and then press ;.• “Now, TV will restart automatically, OK?” displays on the screen. 3Press c/d to select “Yes”, and then press ;.• “Now initialising...” displays on the screen and blinks.• After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings. NOTE• PIN input is required when executing “Reset”. The default PIN is “1234”. To change the PIN setting, refer to Password/Lock settings (Page 37). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 59). Appendix
60 Updating your TV via DVB-T Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. View setting Download setup Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “Download setup”. Searching for updates* * All countries except UK, Sweden and Italy are set to “No” for this function.The TV automatically determines whether a new software version is available when the TV is in standby mode. Item Yes Automatically Downloading the software You can select the method of update. 1If the software is updated, the confirmation message “New download information has been detected.” appears.• If the TV receives the update service while in standby mode, a confirmation message displays after turning on the power. 2Follow the screen prompts. Item Yes Starts NOTE• Do not turn off the MAIN POWER switch or unplug the AC cord while receiving the data, otherwise it will not be captured properly.• Updating the software may take some time. Getting update information Information Message list When new software is detected, you can confirm the update information and download the software from “Message list”. Go to “Menu” > “Setup” > “Information” > “Message list”. NOTE• When the TV succeeds at downloading new software, the message is updated in the “Message list” of the “Information” menu.• The software update will not be carried out if there is no new software available at the specified download time. Information Receiver report Display reports regarding failures and changes for timer settings. Go to “Menu” > “Setup” > “Information” > “Receiver report”. Information Identification You can check the TV ID on the screen for reporting to customer service. Go to “Menu” > “Setup” > “Information” > “Identification”. Appendix
61 Appendix Updating your TV via USB/ network Information Software update This function allows you to update to the latest software via a USB device or network.• To check the software version for the TV, use the URL shown on the back cover. 1Go to “Menu” > “Setup” > “Information” > “Software update” > “USB update”.• You can also update the software through the network. Go to “Menu” > “Setup” > “Information” > “Software update” > “Network update” and follow the on-screen instruction.• A broadband connection and Network setup are required to update the software using the internet (Page 54). 2Press ; and then insert the USB device containing the software update file. CAUTION• Be sure to insert the USB device correctly into the terminal. 3The TV displays a confirmation screen while checking the data in the inserted USB device. CAUTION• If the data is not compatible with the system, an error message appears on the screen. Repeat steps 2 and 3 after pressing ;.• When an error message displays, check to see if:• The USB device is inserted firmly.• The USB memory has two or more software update files.• No data for updating the system exists in the USB memory.• The software update file is broken.• The software update file is not compatible with your TV’s software.• The current system is same as the system update data. 4The TV displays the software version information after checking the data. 5Press c/d to select “Yes” to update the system, and then press ;. 6The TV restarts automatically, and the software update will be complete.• This operation may take a while. Downloaded From TV-Manual.com Manual•
62 Appendix Information on the software license for this product Software compositionThe software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.Software developed by SHARP and open source softwareThe copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.Obtaining source codeSome of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:http://www.sharp-eu.com/gpl/We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed.AcknowledgementsThe following open source software components are included in this product:• linux kernel • busy box • glibc • zlib • libpng • libjpeg • mtd-utils • u-Boot • device-mapper • OpenSSL • DirectFB • cURL • c-ares • ezxml • dtoa • PolarSSL Bignum • libfreetypeSoftware copyrights
64 Appendix Warning regarding basic use Cautions regarding use in high and low temperature environments• When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature returns to normal.• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.Storage temperature: e 5 °C to e 35 °C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE• For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems. Downloaded From TV-Manual.com Manual•
65 Specifications ItemLCD COLOUR TV (40 o/102 cm), LC-40LE924E, LC-40LE924RU, LC-40LE824E, LC-40LE824RU, LC-40LU824E, LC-40LU824RU, LC-40LE814E, LC-40LE814RU, LC-40LX814E LCD COLOUR TV (46 o/117 cm), LC-46LE824E, LC-46LE824RU, LC-46LU824E, LC-46LU824RU, LC-46LE814E, LC-46LE814RU, LC-46LX814E LCD panel102 cm (40 o) X-Gen panel117 cm (46 o) X-Gen panel Resolution1,920 x 1,080 x 4 dots Video colour systemPAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV functionTV-standardAnalogueCCIR (B/G, I, D/K, L/L’) DigitalDVB-T (2K/8K OFDM), DVB-C, DVB-S/S2 Receiving channelVHF/UHFIR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch, I21_I69 ch, IR A_IR J ch CATVHyper-band, S1_S41 ch Satellite950_2150 MHz*3 TV-tuning systemAuto Preset 999 ch (non-Nordic [DTV]), Auto Preset 9999 ch (Nordic [DTV]), Auto Preset 99 ch (ATV), Auto Label, Auto Sort, Auto Preset 9999 ch (SAT) STEREO/BILINGUALNICAM/A2 Audio amplifier10 W x 2/15 W x 1 Speaker(234 mm x 22 mm) x 2/Ø 120 mm TerminalsAntennaUHF/VHF 75 q Din type (analogue & digital), Satellite 75 q F type (DVB-S/S2) RS-232CD-Sub 9 pin male connector EXT 1SCART (AV input, Y/C input, RGB input, TV output) EXT 2RCA pin (AV input/AUDIO L/R) EXT 315 pin mini D-sub HDMI 1 (EXT 4)HDMI (ARC) HDMI 2 (EXT 5)HDMI HDMI 3 (EXT 6)HDMI HDMI 4 (EXT 7)HDMI USBUSB ETHERNET (10/100)Network connector HDMI 2/EXT 3 AUDIO (L/R)Ø 3.5 mm jack*1 DIGITAL AUDIO OUTPUTOptical S/PDIF digital audio output C. I. (Common Interface)EN50221, R206001, CI Plus specification OUTPUT/HeadphonesRCA pin (AUDIO R/L)/Ø 3.5 mm jack (audio output) OSD languageCzech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian Power requirementAC 220_240 V, 50 Hz Power consumption (method IEC62087)924 models140 W (0.2 W standby*2) 824 models127 W (0.2 W standby*2)147 W (0.2 W standby*2) 814 models127 W (0.2 W standby*2)147 W (0.2 W standby*2) Weight924 models21.5 kg (without stand), 25.5 kg (with stand) 824 models19.5 kg (without stand), 23.5 kg (with stand)24.5 kg (without stand), 30.0 kg (with stand) 814 models16.0 kg (without stand), 19.5 kg (with stand)20.5 kg (without stand), 26.0 kg (with stand) Operating temperature0 °C to e 40 °C IThe HDMI 2 and EXT 3 terminals can both use the same audio input terminal. JStandby power consumption applies when the TV is set to not receive EPG data. KThe satellite channel’s frequency may vary according to satellites and antennas.• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Appendix
66 Specifications (Wireless LAN USB adapter) Product nameDual Band 802.11n USB2.0 adapterStandardIEEE 802.11a/b/g/nHost interfaceUSB2.0Frequency band2412_2484 MHz5.150_5.850 GHzSecurityStatic WEP (64/128 bit, key index 1 only)WPA-PSK (TKIP)WPA2-PSK (AES)ModulationDBPSK@1 MbpsDQPSK@2 [email protected]/11 MbpsBPSK@6/9 MbpsQPSK@12/18 Mbps16-QAM@24 Mbps64-QAM@48/54 Mbps and above, Rx up to 300 MbpsTransmit power and sensitivityTx output power: (Typical)2.4 GHz11b 15 e/_ 1.5 dBm11g 15 e/_ 1.5 dBm11n 20 MHz 15 e/_ 1.5 dBm11n 40 MHz 15 e/_ 1.5 dBm5 GHz (5150_5250 MHz, 5250_5350 MHz) 11a 13 e/_ 1.5 dBm11n 20 MHz 14.5 e/_ 1.5 dBm11n 40 MHz 14.5 e/_ 1.5 dBm5 GHz (5470_5725 MHz, 5725_5850 MHz) 11a 13 e/_ 1.5 dBm11n 20 MHz 13 e/_ 1.5 dBm11n 40 MHz 13 e/_ 1.5 dBmRx sensitivity: (Typical)_84 dBm@11 Mbps_72 dBm@54 Mbps_64 dBm@64-QAM, 20 MHz channel spacing_61 dBm@64-QAM, 40 MHz channel spacingCurrent Consumption (5V DC)Tx: 440 mA MaxRx: 440 mA MaxPermitted countries*1Austria, Belarus*2, Belgium, Bulgaria, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel*2, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom, Russia*2, Ukraine*2 Weight15 gDimensions26.6 (W) g 73.3 (D) g 10.6 (H) mmOperating temperature0 °C to e 40 °C IUsage of the wireless LAN USB adapter is permitted for the countries listed. JUsage of the wireless LAN USB adapter will be permitted for these country in near future although it has not been permitted yet. NOTE• This TV has received the following certifications when connected in an environment using the supplied SHARP wireless LAN adapter._ Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance®)_ Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance®)• When there is significant interference in the 2.4_GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point.• Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. Appendix
67 Environmental specifications Item40 inch models46 inch models924 models814/824 models IOn-Mode (W) (HOME MODE)80 W71 W85 W JEnergy-Save-Mode (W)Advanced70 W69 W77 W KStandby-Mode (W)0.20 W0.20 W0.20 W LOff Mode (W)MAIN POWER switch0.01 W or less0.01 W or less0.01 W or less MAnnual Energy Consumption (kWh)116.8 kWh103.7 kWh124.1 kWh NAnnual Energy Consumptioning Energy-Save-Mode (kWh)Advanced102.2 kWh100.7 kWh112.4 kWh IMeasured according to IEC 62087 Ed. 2 JFor further information about the Energy Save function, please see related pages in this operation manual KMeasured according to IEC 62301 Ed. 1 LMeasured according to IEC 62301 Ed. 1 MAnnual energy consumption is calculated on the basis of the On-Mode (HOME MODE) power consumption, watching TV 4 hours a day, 365 days a year NAnnual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4 hours a day, 365 days a year NOTE• The power consumption of On-Mode varies depending on the images the TV displays. Mounting the TV on a wall • This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 67). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.• Mounting the LCD colour TV requires special skills and should only be performed by qualified service pers\ onnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.• You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.• When you mount the TV on a wall, you should attach the supporting post.• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.* Only for 40 inch models. EWall mount audio setupWhen you mount the TV on a wall, you can adjust the sound to a more suitable one by setting this function to “Yes”. Go to “Menu” > “Setup” > “View setting” > “Wall mount audio setup”. EOptional accessoriesThe listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop.• Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No.Part namePart numberNotes 1Wall mount bracket (40 inch models)AN-37AG2The centre of the TV screen is 7.6 mm below the mark “A” on the wall bracket.2Attachment (40 inch models)AN-37P30 3Wall mount bracket (46 inch models)AN-52AG4The centre of the TV screen is 13 mm below the mark “b” on the wall bracket. Appendix
68 Rating table for child lock User-adjusted rating Broadcasted rating AGE 456789101112131415161718 Universal viewing✔—————————————— Parental approval pref.✔✔✔✔✔—————————— X-rated✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔ User-adjusted ratingBroadcasted rating Universal viewingParental approval pref.X-rated Universal viewing——— Parental approval pref.✔—— X-rated✔✔— Abbreviation list Abbreviated termStands for ARCAudio Return Channel ATVAnalogue TV CECConsumer Electronics Control DivX®Digital Video Express :Digital Noise Reduction DTVDigital TV DVB-CDigital Video Broadcasting-Cable DVB-SDigital Video Broadcasting-Satellite DVB-S2Digital Video Broadcasting-Satellite-Second Generation DVB-TDigital Video Broadcasting-Terrestrial DVIDigital Visual Interface EPGElectronic Programme Guide HDCPHigh-bandwidth Digital Content Protection HDMIHigh-Definition Multimedia Interface LANLocal Area Network MHEGMultimedia and Hypermedia Expert Group OSDOn Screen Display PCMPulse Code Modulation SATSatellite USBUniversal Serial Bus WPSWi-Fi® Protected Setup WSSWide Screen Signalling Appendix