Sharp Lc 46le810 Operation Manual

							 59
Using the Internet
VIEW MODE
You can select the screen size.
1   Press VIEW MODE .
The View Mode menu displays.
2   Press VIEW MODE  or 
a/
b  while the View Mode menu is displayed to select a 
desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.You can have the same settings by choosing View Mode on the menu items\
. (See page 28.)
Example: Screen size images
Input signal Auto Original
Keeps the original 
aspect ratio in a full 
screen display.Displays an image by 
an original size.
DISCLAIMERS
This Sharp device facilitates the access to content and services provide\
d by third parties. The content and 
services accessible via this device belong to and may be proprietary to \
third parties. Therefore, any use of such 
third party content and services must be in accordance with any authoriz\
ation or terms of use provided by 
such content or service provider. Sharp shall not be liable to you or an\
y third party for your failure to abide by 
such authorization or terms of use. Unless otherwise speci cally authorized by the applicable content or service 
provider, all third party content and services provided are for personal\
 and non-commercial use; you may not 
modify, copy, distribute, transmit, display, perform, reproduce, upload,\
 publish, license, create derivative works 
from, transfer or sell in any manner or medium any content or services a\
vailable via this device.
Sharp is not responsible, nor liable, for customer service-related issue\
s related to the third party content or 
services. Any questions, comments or service-related inquiries relating \
to the third party content or service 
should be made directly to the applicable content or service provider.
You may not be able to access content or services from the device for a \
variety of reasons which may be 
unrelated to the device itself, including, but not limited to, power fai\
lure, other Internet connection, or failure to 
con gure your device properly. Sharp, its directors, of cers, employees, agents, contractors and af liates shall 
not be liable to you or any third party with respect to such failures or\
 maintenance outages, regardless of cause 
or whether or not it could have been avoided.
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVID\
ED TO YOU 
ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFF\
ILIATES MAKE NO WARRANTY 
OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDI\
NG, WITHOUT 
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS\
 FOR A PARTICULAR 
PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLE\
TENESS, SECURITY, 
TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPE\
RATION OR USE 
OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVIC\
ES WILL MEET 
YOUR REQUIREMENTS OR EXPECTATIONS.
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR O\
MISSIONS OF 
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT \
OR SERVICE 
RELATED TO SUCH THIRD PARTY PROVIDERS.
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THI\
RD PARTY FOR ANY 
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER \
DAMAGES, WHETHER 
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH O\
F WARRANTY, 
STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILI\
ATES HAVE BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.



- $  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 60
 To attach the stand, perform the above steps in reverse order.
Unfasten the four screws used to 
secure the stand in place. Detach the stand from the TV.
13
Appendix
Removing the Stand
Before detaching (or attaching) the stand, unplug the AC cord.
CAUTION
•  Do not remove the stand from the TV unless using an optional wall mount \
bracket to mount it.
LC-40LE810UN/LC-46LE810UN/LC-52LE810UN
Before attaching/detaching the stand
 Before performing work, make sure to turn off the TV.
 Before performing work spread cushioning over the base area to lay the T\
V on. This will prevent it from being  damaged.
■
 To attach the stand, perform the above steps in reverse order.
LC-60LE810UN
Before attaching/detaching the stand
 Before performing work, make sure to turn off the TV.■
2
1
Loosen the screw used to secure the stand cover 
and remove the cover. 1
 Unfasten the four screws used to secure the 
stand in place. 
2  Detach the stand from the TV. (Hold the stand so 
it will not drop from the edge of the base area.)
12
2
1  Loosen the screw used to 
secure the stand cover.
2  Remove the cover.
1
2
-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 61
 Detach the cable clamp on the rear of the TV when using the optional mou\
nt bracket.
 Due to the terminal con guration on this TV, when you wall-mount this model, make sure there is \
enough space between the wall and the TV for the cables.
 To use this TV mounted on a wall, remove the AC cord holder and the scre\
ws at the 4 locations on the rear of the TV, and  then use the screws supplied with the wall mount bracket to secure the b\
racket to the rear of the TV.
2
1
Setting the TV on the Wall
CAUTION
LC-40LE810UN•  This TV should be mounted on the wall with both the AN-37AG2 (SHARP) w\
all mount bracket and the AN-37P30 (SHARP) attachment of the wall mount bracket. The TV cannot be mounted\
 when with only the AN-37AG2 wall 
mount bracket. The use of other wall mount brackets may result in an uns\
table installation and may cause 
serious injuries.
LC-46LE810UN/LC-52LE810UN/LC-60LE810UN•  This TV should be mounted on the wall only with the wall mount bracket A\
N-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause\
 serious injuries.
•  Installing the TV requires special skill that should only be performed b\
y qualifi  ed service personnel. Customers 
should not attempt to do the work themselves. SHARP bears no responsibil\
ity for improper mounting or 
mounting that results in accident or injury.
Using an optional bracket to mount the TV

You can ask a quali ed service professional about using an optional AN-37AG2 + AN-37P30 or A\
N-52AG4 bracket 
to mount the TV on the wall.
 Carefully read the instructions that come with the bracket before beginn\
ing work.
Hanging on the wall
AN-37AG2 + AN-37P30 or AN-52AG4 wall 
mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
Vertical mounting Angular mounting
LC-60LE810UN 
0/5/10° LC-40/46/52LE810UN
0/5/10/15/20° 
AN-37AG2 + AN-37P30
LC-40LE810UN
The center of the display:5/16 inch (7.6 mm) under the “A” position.
AN-52AG4
LC-46LE810UN
 The center of the display:33/64 inch (13 mm) under the “b” position.
LC-52LE810UN The center of the display:3/64 inch (1 mm) above the “b” position.
LC-60LE810UNThe center of the display:43/64 inch (16.7 mm) above the “f” position.
Refer to the operation manual of 
AN-37AG2/AN-37P30 or AN-52AG4 for details.
Appendix
-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 62
Appendix
Troubleshooting
Problem Possible Solution
No power

Check if you pressed  POWER on the remote control unit.  Page 17
Is the AC cord disconnected?   Page 8
Has the power been turned on?   Page 17



Unit cannot be operated.
 External in uences such as lightning, static electricity, may cause improper 
operation. In this case, operate the unit after  rst turning off the power of the TV or 
unplugging the AC cord and replugging it in after 1 or 2 minutes.

Remote control unit does not 
operate.

Is the equipment to be operated by the remote control unit set correctly\
? Press 
TV 
to set the remote control unit to the setting for operating the TV.
Are batteries inserted with polarity ( e, 
f ) aligned? 
 
Page 9
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or  uorescent lighting?
Is a  uorescent light illuminated near the remote control sensor? 
Is RC Control Lock selected in Operation Lock Out?   Page 29






Picture is cut off/with sidebar 
screen.

Is the image position correct?  
Page 29Are screen mode adjustments such as picture size made correctly? 
 Pages 21 and 47

Strange color, light color, or color 
misalignment

Adjust the picture tone. 
 Pages 24 and 25
Is the room too bright? The picture may look dark in a room that is too \
bright.


Power is suddenly turned off.

Is the sleep timer set?   Page 18
Check the power control settings.   Page 27
The units internal temperature has increased. Remove any objects blocki\
ng vent or 
clean.



No sound

Is connection to other components correct?   Pages 12 to 16 and 43
Is the volume too low?   Page 18
Is Variable selected in Output Select?   Page 29
Have you pressed  MUTE on the remote control unit?  Page 18 Check the audio output of the connected external equipment. Is the volum\
e too 
low or muted?
 When external equipment is connected via an HDMI cable, you may need to \
 con gure the audio to be output through the HDMI cable.
 When audio is not output from external equipment connected to the INPUT \
3 or  INPUT 4 terminal, check the Audio Select setting. 
 Page 48 Even when external equipment is connected using an HDMI-certi ed cable, an audio 
cable connection may be required depending on the type of equipment and \
the 
media being played back. In this case, in addition to connecting an HDMI\
-certi ed 
cable to the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo min\
ijack cable to 
the AUDIO IN terminal and set Audio Select to HDMI+Analog. 
 Page 48
 When connecting a PC via an HDMI-certi ed cable, check the following: -  Is the audio output of the PC con gured correctly? Check the audio output 
settings and output audio format in Sound Properties on the PC.
Only PCM format audio can be output. Compressed audio (with a sampling \
rate 
of 32kHz, 44.1kHz, or 48kHz) and DTS format audio cannot be output.
-   Depending on the board, only video signals may be output. In this case, \
in 
addition to connecting an HDMI-certi ed cable to the INPUT 4 (HDMI) terminal, 
connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set 
Audio Select to H DMI+Analog. 
 Page 48
 If you are using a DVI-HDMI conversion cable to connect external equipme\
nt to the  TV, check the following:
-  Is an audio cable connected? The DVI-HDMI conversion cable is for video \
only. 
Connect a Ø 3.5 mm stereo mini jack cable to listen to the audio.
-   Is INPUT 4 being used? When the TV is connected to another HDMI terminal\
, the 
audio and video are not output together even if a Ø 3.5 mm stereo min\
ijack cable 
is connected to the shared AUDIO IN terminal for INPUT 3 and INPUT 4.
-
   Check the Audio Select setting. Set Audio Select to HDMI+Analog. 
 Page 48




-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 63
Problem Possible Solution
No picture

Is connection to other components correct?   Pages 12 to 16 and 43
Is the correct input selected?   Pages 12 and 19
Is On selected in Audio Only?   Page 27 If the PC image is not displayed, check the following:
-  When connecting a laptop PC to the TV, check that display output mode of\
 the 
PC is set to external monitor.
-   Check the resolution setting on the PC. Is a non-compatible signal being\
 input?
 Page 48



Picture quality of HD programs is 
poor.
 To enjoy HD images from external equipment, you are required to set up H\
DMI 
connection or component connection.
If the program content is not of HD quality, HD images cannot be display\
ed. Check 
that the program you are viewing provides HD images.
The HD cable/satellite set-top box may need to be con gured to output HD images 
via cable/satellite.
The cable/satellite broadcast may not support a signal resolution of 108\
0p.




The TV sometimes makes a 
cracking sound.
 This is not a malfunction. This happens when the cabinet slightly expand\
s and 
contracts according to change in temperature. This does not affect the T\
Vs 
performance.

 The original home page cannot 
be displayed.  Is the ETHERNET cable connected correctly?  
Page 50
 Check the settings of Communication Setup and Interactive Service.  \
  Page 51
 Some Internet functions used on  a PC are not available from the 
TV.  The TV has only limited functions compared with regular PC browsers.  
 Page 53
Troubleshooting - Error Message
The example of an error message 
displayed on a screen Error code Possible Solution
Failed to receive broadcast.
 E202Check the antenna cable. Check that the antenna is correctly 
setup.

No broadcast now.
 E203Check the broadcast time in the program guide.

An incompatible audio signal has 
been received. Change the output 
device audio settings to PCM.

—This message is displayed when an audio format other than 
PCM is input. (Dolby Digital and DTS audio formats are not 
supported.)
-  Set the audio output format of connected external HDMI 
equipment to PCM.
-   Refer to the operation manual of the external equipment for 
setting details.

CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the follo\
wing procedure.
1 Select an item from the list below to display the secret number input sc\
reen. (For operating the on-screen 
display menu, see page 22.)
  
➝Input Terminal Setting ➝System Options menu).
  ➝Initial Setup menu).
  ➝Broadcasting Setting ➝Initial Setup menu).
  ➝Individual Setting ➝Initial Setup menu).
  ➝Information menu).
2 Press and hold both  CH
r and 
VOL
k on the TV simultaneously until the message appears on the screen.
The secret number is .
 As a precautionary measure, make a note of your secret number above, cut\
 it from this manual, and keep it in a safe place.
Appendix
-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							Item Model: LC-40LE810UN Model: LC-46LE810UN
LCD 
panel Size 40
o Class (40 o
 Diagonal) 46 o Class (45 63/64o Diagonal)
Resolution 2,073,600 pixels (1,920  g 1,080)
TV 
Function TV-standard (CCIR) American TV Standard ATSC/NTSC System
Receiving 
Channel
VHF/UHF VHF 2-13ch, UHF 14-69ch
CATV 1-135ch (non-scrambled channel only)
Digital Terrestrial 
Broadcast (8VSB)2-69ch
Digital cable
*1 
(64/256 QAM) 1-135ch (non-scrambled channel only)
Audio multiplex BTSC System
Audio out 10W  g 2 
e15W (WF)
Terminals Back panel 
vertical 
inputs INPUT 2 AV in (AV mini plug and RCA plugs)
INPUT 3
ANALOG RGB (PC) in (15-pin mini D-sub female connector), 
Audio in (Ø 3.5 mm stereo jack)
INPUT 4 HDMI in with HDCP, Audio  in (Ø 3.5 mm stereo jack)
INPUT 5 HDMI in with HDCP
INPUT 6 HDMI in with HDCP
INPUT 7 HDMI in with HDCP
AUDIO IN Audio in (Ø  3.5 mm stereo jack)
AUDIO OUT Audio out (Ø  3.5 mm stereo jack)
DIGITAL AUDIO OUTPUTOptical Digital audio output 
g 1 (PCM/Dolby Digital)
ETHERNET Network connector
USB 1 Photo/Music mode, Software update
USB 2 Photo/Music mode, Software update
Back panel 
horizontal 
inputs INPUT 1 COMPONENT in
ANT/CABLE
75 
q Unbalance, F Type 
g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
RS-232C 9-pin D-sub male connector
OSD language English/French/Spanish
Power Requirement AC 120 V, 60 Hz
Power Consumption 140 W (0.5 W Standby with AC 120 V) 160 W (0.5 W Standby with AC 120 V)
Weight TV + stand 43.0 lbs./19.5 kg 57.3 lbs./26.0 kg
TV only 35.3 lbs./16.0 kg 45.2 lbs./20.5 kg
Dimension
*2 
(W  g H 
g D) TV + stand
39 1/16 
g  27 13/16 
g  10 27/32 inch44 19/64 
g  30 7/8 
g  13 25/64 inch
TV only
39 1/16  g  25 59/64 
g  1 37/64 inch44 19/64 
g  28 7/8 
g  1 37/64 inch
Operating temperature e32°F to 
e104°F (0°C to 
e40°C)
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, of ce), the picture may leave trails or appear slightly delayed. 
This is not a malfunction, and the unit will recover when the temperatur\
e returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the \
unit in a location exposed to direct sunlight or near a
 
heater, as this may cause the cabinet to deform and the Liquid Crystal p\
anel to malfunction. 
Storage temperature:  f4°F to 
e140°F (
f20°C to 
e60°C)


 64
Specifi
 cations
Appendix
-$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							Optional Accessory
The listed optional accessory is available for the Liquid 
Crystal Television. Please purchase it at your nearest shop.
 Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for 
compatibility and check the availability.
Part name Model number
Wall mount 
bracket AN-37AG2 (for LC-40LE810UN)
Attachment AN-37P30 (for LC-40LE810UN)
Wall mount 
bracket AN-52AG4
(for LC-46LE810UN/LC-52LE810UN/
LC-60LE810UN)
Item Model: LC-52LE810UN Model: LC-60LE810UN
LCD 
panel Size 52
o Class (52 
1/32o Diagonal) 60
o Class (60 1/32o Diagonal)
Resolution 2,073,600 pixels (1,920  g 1,080)
TV 
Function TV-standard (CCIR) American TV Standard ATSC/NTSC System
Receiving 
Channel
VHF/UHF VHF 2-13ch, UHF 14-69ch
CATV 1-135ch (non-scrambled channel only)
Digital Terrestrial 
Broadcast (8VSB)2-69ch
Digital cable
*1 
(64/256 QAM) 1-135ch (non-scrambled channel only)
Audio multiplex BTSC System
Audio out 10W  g 2 + 15 W (WF)
Terminals Back panel 
vertical 
inputs INPUT 2 AV in (AV mini plug and RCA plugs)
INPUT 3
ANALOG RGB (PC) in (15-pin mini D-sub female connector), 
Audio in (Ø 3.5 mm stereo jack)
INPUT 4 HDMI in with HDCP, Audio  in (Ø 3.5 mm stereo jack)
INPUT 5 HDMI in with HDCP
INPUT 6 HDMI in with HDCP
INPUT 7 HDMI in with HDCP
AUDIO IN Audio in (Ø  3.5 mm stereo jack)
AUDIO OUT Audio out (Ø  3.5 mm stereo jack)
DIGITAL AUDIO OUTPUTOptical Digital audio output 
g 1 (PCM/Dolby Digital)
ETHERNET Network connector
USB 1 Photo/Music mode, Software update
USB 2 Photo/Music mode, Software update
Back panel 
horizontal 
inputs INPUT 1 COMPONENT in
ANT/CABLE
75 
q Unbalance, F Type 
g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
RS-232C 9-pin D-sub male connector
OSD language English/French/Spanish
Power Requirement AC 120 V, 60 Hz
Power Consumption 170 W (0.5 W Standby with AC 120 V) 230 W (0.5 W Standby with AC 120 V)
Weight TV + stand 66.1 lbs./30.0 kg 95.9 lbs./43.5 kg
TV only 54.0 lbs./24.5 kg 71.7 lbs./32.5 kg
Dimension
*2 
(W  g H 
g D) TV + stand
49 37/64 
g  33 29/32 
g  13 25/64 inch56 5/8 
g  38 23/64 
g  14 1/2 inch
TV only
49 37/64  g  31 57/64 
g  1 37/64 inch56 5/8 
g  35 59/64 
g  1 37/64 inch
Operating temperature e32°F to 
e104°F (0°C to 
e40°C)
*1  Emergency alert messages via Cable are unreceivable.*2  The dimensional drawings are shown on the inside back cover.
 As part of policy of continuous improvement, SHARP reserves the right to\
 make design and speci cation changes for  product improvement without prior notice. The performance speci cation  gures indicated are nominal values of production 
units. There may be some deviations from these values in individual unit\
s.
 65
Appendix
-$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 66
Information on the Software License for This Product
Software composition
The software included in this product is comprised of various software c\
omponents whose individual copyrights 
are held by SHARP or by third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant document\
s included with this product that 
were developed or written by SHARP are owned by SHARP and are protected \
by the Copyright Act, international 
treaties, and other relevant laws. This product also makes use of freely\
 distributed software and software 
components whose copyrights are held by third parties. These include sof\
tware components covered by a GNU 
General Public License (hereafter GPL), a GNU Lesser General Public Li\
cense (hereafter LGPL) or other license 
agreement.
Obtaining source code
Some of the open source software licensors require the distributor to pr\
ovide the source code with the executable 
software components. GPL and LGPL include similar requirements. For info\
rmation on obtaining the source code 
for the open source software and for obtaining the GPL, LGPL, and other \
license agreement information, visit the 
following website:
http://www.sharpusa.com/gpl
We are unable to answer any questions about the source code for the open\
 source software. The source code for 
the software components whose copyrights are held by SHARP is not distri\
buted.
Acknowledgements
The following open source software components are included in this produ\
ct:
 U-Boot/WMDRM/AGG(ver2.3)/device-mapper
Software Copyrights
XMLRPC-EPI Copyright 2000 © Epinions, Inc.
libjpeg This software is copyright © 1991-1998, Thomas G. Lane.
Portions of this software are based in part on the work of the Independe\
nt JPEG Group.
OpenSSL Copyright © 1998-2008 The OpenSSL Project.
This product includes software developed by the OpenSSL Project for use \
in the OpenSSL
Toolkit. (http://www.openssl.org)
SSLeay Copyright © 1995-1998 Eric Young ([email protected])
This product includes cryptographic software written by Eric Young (eay\
@cryptsoft.com).
Expat Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and\
 Clark Cooper.
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Qt Copyright © 2009 Nokia Corporation and/or its subsidiary(-ies).
Contact: Qt Software Information ([email protected])
WMDRM Content owners use Windows Media digital rights management technology (\
WMDRM) to protect their 
intellectual property, including copyrights. This device uses WMDRM soft\
ware to access WMDRM-
protected content. If the WMDRM software fails to protect the content, c\
ontent owners may ask 
Microsoft to revoke the software’s ability to use WMDRM to play or co\
py protected content.
Revocation does not affect unprotected content. When you download licens\
es for protected content, 
you agree that Microsoft may include a revocation list with the licenses\
. Content owners may require 
you to upgrade WMDRM to access to their content. If you decline an upgra\
de, you will not be able to 
access content that requires the upgrade.
■
■
■
■
■
Appendix
-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 67
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the 
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it w ill, at its option, 
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge  to the 
purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Produ ct has 
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problem s. This 
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty  is meant solely 
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use t his Product 
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms  of which may 
vary. Please contact  1-888-GO-SHARP for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to p rovide proof of 
purchase to the servicer, which proof must include the date of purchase. 
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warrantie s, express or 
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR 
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE 
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF 
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS 
WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shal\
l be the sole and exclusive rem edy 
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone  are 
permitted. Correction of defects, in the manner and for the period of time described he\
rein, shall constitute complete fulfillme nt of all 
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction  of all claims, 
whether based on contract, negligence, strict liability or otherwise. Sh\
arp does not warrant nor shall Sharp be liable, or in a ny way
responsible, for Products which have been subject to abuse (including, but not limited to,\
 improper voltage), accident, misuse,  negligence, 
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defect s in the 
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall  Sharp 
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow l imits on 
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
Model Specific Section
Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the 
location of the nearest Sharp Authorized Servicer, please call Sharp toll free 
at 1-800-BE-SHARP.
What to do to Obtain Service: Contact your Sharp Authorized Servicer to obtain in home service for thi\
s 
product. The Servicer will come to your location and if necessary remove the 
unit for repair at the Servicer’s facility and return the set to you once 
completed. Be sure to have Proof of Purchase available.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL  1-800-BE-SHARP 
OR VISIT www.sharpusa.com
Additional Exclusions from 
Warranty Coverage (if any): In order for the Product to be serviced, the Product must be readily available 
to the servicer, free and clear of any complex or non-standard installation, 
mounting or other encumbrance which would unreasonably interfere with 
servicing the Product. The Servicer will remount the Product after service, 
provided that such remounting is not into a complex or non-standard installa-
tion. Any additional labor and materials required to remove and/or reinstall a 
Product above and beyond the foregoing are not covered by this warranty, 
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long 
periods of time is not covered by this Limited Warranty (see Operation 
Manual on how to prevent this).
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Your Product Model Number & Description:
LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN
LCD Color Television
(Be sure to have this information available when you need service for your 
Product.)
For location of the nearest Sharp Authorized Service, or to obtain produ\
ct literature, accessories, supplies, or 
customer assistance, please call 1-800-BE-SHARP.
Calling for Service
LIMITED WARRANTY
-$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
LC-46LE810UN
LC-40LE810UN
15 3/4 (400)
15 
3/4 (400)
8 5/16
(211)
44 19/64 (1125)
28 
7/8 (733)
17 
31/64 (444)30 
7/8 (784)
2 1/64(51)
40 13/64 (1020.8)
22 
21/32
(575.4)21 17/64 (540)
13 25/64(340)
1 37/64(40)6 15/64(158)
4 7/32(107)
2 41/64(67)1 37/64(40)
AN-52AG4
17 47/64 (450)
AN-37AG2 AN-37P30
+
1 37/64(40)
5 (127)
3 7/16(87)
11 13/16 (300)
11 
13/16 (300)
5 13/64
(132)
10 27/32(275)
4 57/64(124)1 37/64(40)
39 1/16 (992)
27 
13/16 (706)
25 
59/64 (658)
1 57/64
(48)
15 
59/64
(404)
34 61/64 (887.8)
19 
45/64
(500.4)
-$-&6/@4JOEC


-$-&6/@4JOEC