Sharp Lc 46le810 Operation Manual

							 39
Enjoying Photo and Music Playback
Select Slide Show BGM
You can select the music to be played in the 
background while the slide show is being displayed.
1   Press  D to display the USB MENU screen.
2   Press 
a/
b  to  select Select Slide Show BGM, 
and then press  ENTER.

 B on the 
thumbnail selection screen.
3  Select the music.
...
...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3 3:42
4:55
4:08
4:20
3:55
4:26
4:35
SONG_03.MP3
0:14 / 4:35
Example
Buttons Description
ENTER Play music.
a /b /c
/d
Select a desired item.
RETURN Return to the previous process.
A (red) Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green) Stop music.
C (blue) Play/Pause music.
D (yellow) Display the USB MENU screen.
4   Press RETURN  to display the thumbnail selection 
screen, and then press  C to start the slide show 
and the background music.
All of the music  les are selected by default.

Set/Reset All Slide Show Image
Set or reset the images to be displayed.
1   Press  D to display the USB MENU screen.
2   Press a /
b to select Set All Slide Show Image/
Reset All Slide Show Image, and then press 
ENTER .

checkmarks are added to all the images.
 all the checkmarks from all the images.
...
...picture 5picture 4picture 2picture 1picture 3
Example
3   Press  C to start the slide show.
If no images have been selected, Cannot display the data 
is displayed and the slide show does not start.

-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 40
Enjoying Photo and Music Playback
Music Mode
...
...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3 3:42
4:55
4:08
4:20
3:55
4:26
4:35
SONG_03.MP3
0:14 / 4:35
Example
Buttons Description
ENTER Play music.
a /b /c
/d
Select a desired item.
RETURN Return to the previous process.
A (red) Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green) Stop music.
C (blue) Play/Pause music.
D (yellow) Display the USB MENU screen.
When there are invalid music  les, the X mark will be 
displayed for the  le.
The displayed play time may differ slightly from the actual 
play time depending on the  les.


USB Menu
Set All Auto Play
Reset All Auto Play USB MENU
Example
Set/Reset All Auto Play
Set or reset the music to be played back.
1   Press  D to display the USB MENU screen.
2   Press 
a/
b  to select Set All Auto Play/Reset All 
Auto Play, and then press  ENTER.

added to all the music  les.
 checkmarks from all the music  les.
3   Press  C to play back the music.
If no music  les have been selected, Cannot playback the 
audio  le is displayed and the music is not played back 
automatically.
USB Memory Device Compatibility
USB memory 
device USB Memory, USB card reader (Mass 
Storage class)
File system FAT/FAT32
Photo  le 
format JPEG (.jpg) (DCF2.0 compliant)
Music  le 
format MP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Progressive format jpeg  les are not supported.
Music  les in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.




-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 41
Presetting Remote Control Function
You can operate the connected AV products (AV 
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, 
LD) using the presetting manufacturer function of your 
remote control unit.
14
12
11
6
13
10
8
9
7
5 4
3
2
1
Presetting manufacturer codes
1   Press an appropriate button (
STB, DVD•VCR  or 
AUDIO ) to operate the connected equipment.
2   Press an appropriate button ( STB, DVD•VCR  or 
AUDIO ) and DISPLAY  at the same time to enter 
the code registration mode.
3   Press  0–9  to enter the manufacturer code. (See 
page 42.)
 Preset mode is  nished once the LED no longer lights 
up.
4   After registering the code, the LED will stop blinking then turn off after one second. (If you perform an 
incorrect operation, the LED will blink quickly then 
turn off.)
Operating the Connected Equipment
To operate the connected equipment, press  STB, 
DVD∙VCR  or AUDIO  to select your device. (STB (cable 
converter), DVD, BD, VCR or AUDIO.) The remote 
control unit button will function as follows.
 When you operate VCR, DVD or BD, press  INPUT to select 
the terminal connected to your device. 
 CABLE and SAT cannot be selected at the same time.
1  POWER (SOURCE)  
2 I
3 G 

4 H

disc players, pressing the button twice may open the disc 
tray. (DVD, BD)
5 Kcurrently playing. Each time you press it, you move back 
to the start of the previous chapter. (DVD, BD)
6 0 –9 , •  (DOT) (STB)
channel that you wish to watch.
7 J(VCR)

8 F
9 L chapter. Each time you press it, you move ahead to the 
start of the next chapter. (DVD, BD)
10 EREC
11 FLASHBACK channel you were watching immediately before. Some 
manufacturers do not preset FLASHBACK. (STB)
12 CH r/
s CHr or CHs to tune in to a higher or lower 
channel. (STB)

(VCR)
13 MENUdisplay. (DVD, BD)
14 a /
b /
c /
d , 
ENTER
a /
b /
c /
d :
 Press the button to select items on the STB 
GUIDE screen or STB MENU screen. (STB)
  Press the button to select items on the DVD/BD menu  screen. (DVD, BD)
 ENTER:  Press to activate the selected function. (STB, 
DVD, BD)
Other Viewing Options
- $  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 42
Manufacturer codes Other Viewing Options
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY  WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA09
13
04
12
04
09
10, 13, 14
04
04
04
09, 16, 17, 22
09
04, 05, 06
12
04
02
09
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
09
10
09
REMOTE CONTROL CODE 
NUMBER
VCR BRAND
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH 24
31
36
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
REMOTE CONTROL CODE 
NUMBER
DVD/BD/LD BRAND
 Depending on the brand, the codes of some BD players 
may not be supported.
ANVISION
CABLE STAR
EAGLE 
G.INSTRUMENT
GERROLD
JERROLD
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH 04, 05
04, 05
05
02, 03, 10, 11, 17, 20
17
02, 03, 10, 11, 12, 20, 
25-34
04, 05, 08, 12, 15, 16, 
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
07 
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
06, 35
REMOTE CONTROL CODE 
NUMBER
STB BRAND
 Numbers marked with * are SAT codes, all others are STB 
codes.
SHARP
SHARP (SOUND BAR) 01
02
AUDIO BRAND
REMOTE CONTROL CODE 
NUMBER
-$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 43
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
 Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS\
 LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV ampli er, DVD).
 By connecting AQUOS LINK-compatible devices with HDMI-certi ed cables to the TV, you can control a  recorder or AV ampli er using the remote control of the TV.
 AQUOS LINK allows you to operate the HDMI-connected equipment with one r\
emote control.
Back panel vertical inputs
Example
AQUOS LINK-compatible  Audio system AQUOS BD Player
HDMI-certied cable 
* Use INPUT 4 to connect 
   ARC-compatible equipment.
HDMI-certied cable  Optical ber cable *Connecting AQUOS 
BD Player via AQUOS 
LINK-compatible 
Audio system 
For connecting the TV to AQUOS LINK-compatible equipment, use commercial\
ly available cables.
Point the remote control toward the TV, not to connected HDMI equipment.\
Video noise may occur depending on the type of HDMI cable used. Make sur\
e to use an HDMI-certi ed cable.
Up to 3 pieces of HDMI recording equipment and one AV ampli er can be connected using this system.
These operations affect the HDMI equipment selected as the current input\
 source. If the equipment does not operate, turn on 
the equipment and select the appropriate input source using 
INPUT.





Connected AQUOS LINK-compatible devices can be operated without 
changing the settings of the remote control unit. 
REC STOP
 and OPTION  buttons will function only when AQUOS LINK is 
used.
■ One Touch Play
While the TV is in standby mode, it automatically turns on and plays bac\
k the 
image from the HDMI source.
■  One Touch Recording
Press 
EREC  while you are viewing a broadcast received with the AQUOS 
LINK-compatible recorder. The AQUOS LINK automatically recognizes the 
connected HDMI device and starts recording.
■  Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and 
you can control the TV and the devices as if using a universal remote co\
ntrol.
■  Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
The above description is an example of the AQUOS LINK function.
The steps in “AQUOS LINK Setup” on page 44 need to be completed be\
forehand.
Refer to this operation manual and the operation manual of the AQUOS LIN\
K device to be used with this TV.



-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 44
AQUOS LINK Setup
Menu
System Options
AQUOS LINK Setup
System
Options
AQUOS LINK Control[On]Auto Power On[Yes]
[Auto]
Selecting Recorder
Channel Select Key
Audio Return Channel
Example
     
1   Press  MENU to display the MENU screen, and then 
press  c/
d  to select System Options.
2   Press 
a/
b  to select “AQUOS LINK Setup”, and 
then press  ENTER.
3   Press 
a/
b  to select a speci c item, and then press 
ENTER .
4   Press 
a/
b  (or 
c/
d  ) to select the desired setting, 
and then press  ENTER.
5   Press MENU to exit.
AQUOS LINK Control
Select AQUOS LINK Control to disable AQUOS LINK 
function even when an AQUOS LINK-compatible HDMI 
device is connected to the TV. This function prevents 
the device from starting to operate unexpectedly.
Enable:   You can operate AQUOS LINK-compatible 
equipment.
Disable:  AQUOS LINK function does not work.
Auto Power On
If this is activated, the One Touch Play function is 
enabled.
Yes:  While the TV is in standby mode, it automatically 
turns on and plays back the image from the HDMI 
source.
No:  This function does not work.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are 
connected, this function allows you to set the recorder 
for recording when you press 
EREC  on the TV’s 
remote control unit.
Press  a/
b  to select the recorder for recording.
When an AQUOS LINK-compatible audio system or other 
equipment is connected between the TV and recorder, 
“Sub” is displayed.

Using AQUOS LINK
Channel Select Key
This function can be set for each input terminal.
On:  The remote control unit of the TV can be used to 
select the channel, display program information, and 
perform other operations of a connected AQUOS 
LINK-compatible recorder.
Off:  This function does not work.
Audio Return Channel
This function allows you to listen to the TV audio via 
audio equipment without using an optical  ber cable, 
which conventionally is required.
Requirements for using an ARC-compatible AV 
amplifi  er:
ARC-compatible AV ampli er connected to the ARC-
compatible HDMI terminal (INPUT 4).
(Refer to the operation manual of the ARC-compatible 
equipment for details.)
Use of an ARC-compatible cable.
Auto:  You can listen to the TV audio with ARC-
compatible audio equipment.
Off:  This function does not work.
If the TV audio cannot be output from the AV ampli er even 
after making the necessary settings, connect the TV to the 
AV ampli er with an optical  ber cable and select “Off”.



-
$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 45
Link Operation Menu
Recorder Power On/Off
Device Operation panel
[By AQUOS SP]
Play from Rec. List
Show Start Menu
Change Media of Device
Link Booking (Rec. Book)
Change Audio Output Device
Change Surround Mode
Choosing Operating Device
AQUOS LINK Setup
Link Operation
MenuLink
Operation
     
Turning On/Off AQUOS LINK-compatible 
Equipment
You can manually turn on/off the power of connected 
AQUOS LINK-compatible equipment.
1   Press 
OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Recorder Power On/Off”, and 
then press  ENTER.
3   Select “On” (or “Off”) and press  ENTER to turn on 
(or off) the equipment.
Using AQUOS LINK
One Touch Recording
This function allows easy one-touch recording of the 
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by 
simply pressing 
EREC  on the remote control.
Prepare the connected AQUOS LINK-compatible 
recorder for recording. Check the following items.
Make sure that the antenna cable is connected.
Check that there is suf cient available space on the recording media (HDD, DVD, etc.).
On the TV, use “AQUOS LINK Setup” and “Selecting  Recorder” to select the equipment for recording.
By default, the recorder connected to INPUT 4 is selected  for recording.
1   Press EREC  to start recording.
When you are viewing a broadcast received with 
the AQUOS LINK-compatible recorder selected in 
Selecting Recorder, recording to the AQUOS recorder 
of the broadcast being viewed starts.
When you are viewing a broadcast received with 
equipment other than the AQUOS LINK-compatible 
recorder selected in Selecting Recorder or other 
external input equipment, pressing 
EREC on the 
remote control does not start recording.
2   Press  REC STOP  to stop recording.
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Press 
d to start playing back a title.
The last played program is played back. You can use the 
following buttons during broadcast viewing.
Buttons Description
POWER
(SOURCE) Turns the power of the HDMI connected devices 
on and off.
G Hold down to go in reverse.
I Starts playback.
J Hold down to fast forward.
H Playback stops.
F Sets pauses and still pictures.
T Pressing quickly once takes you to the start of the 
chapter currently playing. Each time you press it, 
you move back to the start of the previous chapter.
U Pressing quickly once takes you to the start of the 
next chapter. Each time you press it, you move 
ahead to the start of the next chapter.
The buttons T/U do not function with the following 
Blu-ray disc players currently available.
- BD-HP20U, BD-HP50U








- $  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 46
Using the Device Operation Panel
You can use the device operation panel to control 
playback operations.
1   Press OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Device Operation Panel”, and 
then press  ENTER.
3   Press 
a/
b /
c /
d  to select the desired operation.
This function works only when AQUOS LINK-compatible 
equipment with the Device Control Panel function is 
connected.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the 
AQUOS LINK-compatible equipment.
1   Power on the AQUOS LINK-compatible equipment, 
and select appropriate external input.
2   Press  OPTION  to display the Link Operation Menu 
screen.
3   Press  a/
b  to select “Play from Rec. List”, and 
then  press  ENTER .
The title list data from the connected AQUOS LINK-
compatible equipment displays.
4   Select the title with  a/
b /
c /
d , and then press 
d 
to start playback.
This function works only when AQUOS LINK-compatible 
equipment is connected.
Displaying the Setup Menu of AQUOS 
LINK-Compatible Equipment
You can call up a setup menu from the connected 
AQUOS LINK-compatible equipment.
1     Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select Show Start Menu, and then 
press  ENTER .
The setup menu of the AQUOS LINK-compatible 
equipment is displayed.
Depending on the status of the equipment (recording or in 
standby mode, etc), the setup menu will not be displayed.
The setup menu will not be displayed with the player 
BD-HP20U currently available.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
You can switch the media (HDD or DVD) for playback 
or recording on the AQUOS LINK-compatible recorder.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Media of Device”, 
and then press  ENTER.
3  Select the desired media such as DVD or HDD. 
The Media type toggles each time you press  ENTER in 
“Change Media of Device”.
Select the media to be operated by the player.








Using AQUOS LINK
Timer Recording
You can call up the AQUOS LINK-compatible 
recorder’s EPG and preset timer recordings using the 
TV’s remote control.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Link Booking (Rec. Book)”, 
and then press  ENTER.
The recorder’s EPG is displayed.
3   Select the program to record.
 You can use 
a/
b /
c /
d ,
 ENTER
, RETURN , EXIT  and 
the colored buttons.
This function works only when an AQUOS LINK-compatible 
recorder is connected.
Refer to the operation manual of the recorder for details.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the 
AQUOS LINK-compatible audio system and manually 
change its sound mode.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Audio Output 
Device”, and then press  ENTER.
3   Press 
a/
b  to select “By AQUOS audio SP”, and 
then press  ENTER.
The sound from the TV speaker is muted and only the 
sound from the AQUOS LINK-compatible audio system 
is audible.
You can use  VOL
k/
l  and 
MUTE .
Select “By AQUOS SP”, and then press  ENTER to 
listen to the TV sound.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Surround Mode”, 
and then press  ENTER.
The sound mode changes each time you press  ENTER.
Refer to the operation manual of the AQUOS LINK-
compatible audio system for details.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Choosing Operating Device”, 
and then press  ENTER. The HDMI device toggles 
each time you press  ENTER.
Displaying the Link Operation Menu
1   Press OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “AQUOS LINK Setup”, and 
then press  ENTER.
The AQUOS LINK Setup menu screen is displayed.








-$  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 47
VIEW MODE
You can select the screen size.
1   Press VIEW MODE .
The View Mode menu displays.
The menu lists the View Mode options selectable for the type of video si\
gnal currently 
being received.
2   Press VIEW MODE  or 
a/
b  while the View Mode menu is displayed to select a 
desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.
Connect the PC before making adjustments. (See page 16.)
Selectable screen size may vary with input signal type.
You can have the same settings by choosing View Mode on the menu items\
. (See page 28.)
Example: Screen size images
Input signal Normal Zoom Stretch Dot by Dot
4:3Keeps the original 
aspect ratio in a full 
screen display.For viewing 
widescreen 
programs. The top 
and bottom of the 
image is cropped.An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Input signal Stretch Dot by Dot
16:9An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.






Using a PC
Displaying a PC Image on the Screen
- $  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC


  


   



 
						

							 48
Using a PC
1   Press MENU to display the MENU screen, and then 
press  c/
d  to select System Options.
2   Press 
a/
b  to select “Input Terminal Setting”, and 
then press  ENTER.
3   Press 
a/
b  to select “PC input”, and then press 
ENTER .
4   Press 
a/
b  to select a speci c adjustment item, 
and then press  ENTER to set each item.
5   Press 
a/
b  (or 
c/
d ) to select or adjust the desired 
setting, and then press  ENTER.
Adjusting the PC Image
Auto Sync. (for Analog PC Input Mode Only)
For automatically adjusting the PC image.
Yes:  Auto Sync. starts and Now adjusting the image. 
displays.
No:  This function does not work.
When Auto Sync. is successful, Completed displays. If 
not, Auto Sync. failed.
Auto Sync. may fail even if Completed displays.
Auto Sync. may fail if the computer image has low 
resolution, has unclear (black) edges, or is moved while 
executing Auto Sync..
Be sure to connect the PC to the TV and switch it on before 
starting Auto Sync..
Fine Sync.
Ordinarily you can easily adjust the picture as necessary 
to change image position using Auto Sync.. In some 
cases, however, manual adjustment is needed to 
optimize the image.
H-Pos.:  Centers the image by moving it to the left or 
right.
V-Pos.:  Centers the image by moving it up or down.
Clock:  Adjust when the image  ickers with vertical 
stripes.
Phase:  Adjust when characters have low contrast or 
when the image  ickers.
For resetting all Fine Sync. adjustment items to the factory 
preset values, press  a/
b  to select Reset, and then press 
ENTER .
It is not necessary to adjust the Clock or Phase when a 
digital signal is being input, so it cannot be selected.
The default cursor position may not be in the center, 
because the screen position variable ranges may be 
asymmetrical.
The screen position variable ranges depend on the View 
Mode or the signal type. The ranges can be seen on the 
position-setting screen.








Setting Audio Input
Audio Select
This function sets the terminal to output the computer 
audio.
The adjustment items vary depending on the input 
source. Select the input source corresponding to the 
terminal connected to the PC and then adjust the 
desired item.
■  INPUT 3
Video: 
Select this when the TV and PC are connected 
using an analog RGB cable and the audio is not input.
Video+Audio:  Select this when the TV and PC are 
connected using an analog RGB cable and the audio is 
input via a Ø 3.5 mm stereo minijack.
■  INPUT 4HDMI(Digital): 
Select this when the TV and PC are 
connected using an HDMI-certi ed cable and audio is 
input via the same cable.
HDMI+Analog:  Select this when the TV and PC are 
connected using a DVI-HDMI conversion cable and the 
audio is input via a Ø 3.5 mm stereo minijack.
When Audio Select is set to HDMI(Digital), sound will 
not be produced if you use only an HDMI-certi ed cable to 
connect HDMI-compatible equipment. To produce sound, 
you should make an analog audio connection.
If you want to connect HDMI-compatible equipment 
using only an HDMI-certi ed cable, set Audio Select to 
HDMI(Digital).


PC Compatibility Chart
It is necessary to set the PC correctly to display XGA 
and WXGA signal. 
VGA and XGA are registered trademarks of International 
Business Machines Corp.
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
640 x 480 720 x 400
VGA
800 x 600
SVGA
XGA 1024 x 768
WXGA 1360 x 768 70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
O
O
O
O
O
O
O
O O
O
O
64.0 kHz
SXGA 1280 x 1024 60 Hz O
65.3 kHz
SXGA+ 1400 x 1050 60 Hz O
75.0 kHz
UXGA 1600 x 1200
60 Hz
67.5 kHz
1080p 1920 x 1080 60 Hz O
Horizontal 
FrequencyVESA 
Standard
ResolutionVertical 
Frequency
- $  @ @ @ -&  6 / @& J O EC 


 -$@@@-&6/@&JOEC