Sharp Lc 46le810 Operation Manual

LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN  OPERATION MANUAL    MODE DEMPLOI    MANUAL DE OPERACIÓN
ENGLISH
FRANÇAIS
ESPAÑOL
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
IMPORTANT  :  Veuillez lire ce mode demploi avant de commencer à utiliser lappareil.
IMPORTANTE  :  Lea este manual de operación antes de comenzar a operar el equipo.
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
ENGLISH
FRANÇAIS
ESPAÑOL
OPERATION MANUAL
MODE DEMPLOI
MANUAL DE...

Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
LC-60LE810UN
LC-52LE810UN
22 27/32 (580)
56 5/8 (1438)
52 7/16 (1331.8)
15 3/4 (400)1 37/64(40)6 55/64(174)
14 1/2 (368)1 37/64(40)2 41/64(67)
4 7/32(107)
29 35/64
(750.4)
21 1/2 (546)38 23/64 (974)
35 59/64 (912)
2 29/64(62)
15 3/4 (400)
4 49/64
(121)
AN-52AG4
15 3/4 (400)
15 3/4 (400)
6 25/32
(172)
49 37/64 (1259)
31 57/64 (810)
33 29/32 (861)
2 1/64(51)
45 15/32 (1154.8)
25 5/8
(650.8)
19 1/16 (484)21 17/64 (540)
13...

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: 
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the products 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user 
to the presence of important 
operating and...

INFORMATION:This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. T his 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that...

Electricity is used to perform many useful functions, but it can also ca\
use personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleani\
ng the product. To ensure your safety 
and prolong the service life of your Liquid Crystal...

IMPORTANT SAFETY INSTRUCTIONS
 4
 Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70,  provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of...

IMPORTANT SAFETY INSTRUCTIONS
 5
Caring for the Liquid Crystal panel
 Turn off the main power and unplug the AC cord from the wall outlet befo\
re handling.
 Gently wipe the surface of the display panel with a soft cloth (cotton,\
  annel, etc.).
  To protect the display panel, do not use a dirty cloth, liquid cleaners,\
 or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the display\
 panel.
 Wiping with a hard cloth or using strong force may scratch the surface o\
f...

 6
Contents
IMPORTANT INFORMATION ..................... 1
Trademarks  ....................................... 2
DEAR SHARP CUSTOMER  ....................... 3
IMPORTANT SAFETY INSTRUCTIONS  ........ 3-5
Supplied Accessories  ............................ 7
QUICK REFERENCE Attaching the Stand  ............................ 7
QUICK INSTALLATION TIPS  ................... 8
Using the Remote Control Unit  ................. 8
Preparation Antennas  ....................................... 9
Installing Batteries in...

 7
1 Confi rm that there are 9 screws (5 short screws 
and 4 long screws) supplied with the stand unit.
2 Attach the supporting post for the stand unit onto 
the base using the box for the stand unit as shown 
below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the 
supporting post in the direction indicated below and 
attach the stand to the TV with the wider side of the 
base facing forward.
Long screws
3 Insert the stand into the openings on the...

 8
QUICK REFERENCE
Using the Remote Control Unit
Use the remote control unit by pointing it towards the 
remote control sensor on the TV. Objects between the 
remote control unit and the remote control sensor may 
prevent proper operation.
30º 30º30º
30º
17´ (5 m)Remote control sensor
■  Cautions regarding the remote control unit
 Do not expose the remote control unit to shock. In addition, 
do not expose the remote control unit to liquids, and do not 
place in an area with high humidity.
 Do not install...