Sharp Lc 46le810 Operation Manual

							LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN  OPERATION MANUAL    MODE DEMPLOI    MANUAL DE OPERACIÓN
ENGLISH
FRANÇAIS
ESPAÑOL
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
IMPORTANT  :  Veuillez lire ce mode demploi avant de commencer à utiliser lappareil.
IMPORTANTE  :  Lea este manual de operación antes de comenzar a operar el equipo.
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
ENGLISH
FRANÇAIS
ESPAÑOL
OPERATION MANUAL
MODE DEMPLOI
MANUAL DE OPERACIÓN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA  DE CRISTAL LÍQUIDO
ENGLISH
FRANÇAIS
ESPAÑOL
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-E589WJZZ
10P02-MX-NM
- $  @ @ @ -&  6 / @& @$ PWFSJ O  


-$@@@-&6/@&@$PWFSJO


   


    



 
						

							Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
LC-60LE810UN
LC-52LE810UN
22 27/32 (580)
56 5/8 (1438)
52 7/16 (1331.8)
15 3/4 (400)1 37/64(40)6 55/64(174)
14 1/2 (368)1 37/64(40)2 41/64(67)
4 7/32(107)
29 35/64
(750.4)
21 1/2 (546)38 23/64 (974)
35 59/64 (912)
2 29/64(62)
15 3/4 (400)
4 49/64
(121)
AN-52AG4
15 3/4 (400)
15 3/4 (400)
6 25/32
(172)
49 37/64 (1259)
31 57/64 (810)
33 29/32 (861)
2 1/64(51)
45 15/32 (1154.8)
25 5/8
(650.8)
19 1/16 (484)21 17/64 (540)
13 25/64(340)
1 37/64(40)6 15/64(158)
4 7/32(107)
2 41/64(67)1 37/64(40)
AN-52AG4
- $  @ @ @ -&  6 / @& @$ PWFSJ O  


-$@@@-&6/@&@$PWFSJO


   


    



 
						

							TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: 
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the products 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user 
to the presence of important 
operating and maintenance 
(servicing) instructions in the 
literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE 
SLOT, FULLY INSERT.
CAUTION:
 1
OPERATION MANUAL
IMPORTANT:
To aid reporting in case of loss or theft, please record the 
TVs model and serial numbers in the space provided. The 
numbers are located at the rear of the TV.Model No.:
Serial No.:
LIQUID CRYSTAL TELEVISION
ENGLISH
IMPORTANT INFORMATION
ENGLISH
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
-$  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							INFORMATION:This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. T his 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which c an be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY:SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN\
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY: SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
“Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Article 820-40 of th e National 
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be conne cted to the 
grounding system of the building, as close to the point of cable entry as \
practical.”
CAUTION:This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other 
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shield\
ed 
cables and connectors for connections.
WARNING:
 FCC Regulations state that any unauthorized changes or modifications \
to this equipment not expressly 
approved by the manufacturer could void the users authority to operate this equipment.
This product qualifies for ENERGY STAR when Home is selected for TV Location.
Setting TV Location to Home allows the TV to achieve an energy-saving status for household use.
 2
IMPORTANT INFORMATION
Trademarks
•  Manufactured under license from Dolby Laboratories. Dolby and the double\
-D symbol are trademarks of Dolby  Laboratories.
•  “HDMI, the HDMI logo and High-Defi  nition Multimedia Interface are trademarks or registered trademarks of H\
DMI 
Licensing LLC.”
•  Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy 
effi  ciency.
•
   and LC logo mark are registered trademarks of SHARP Corporation.  This product is embedded with LC Font technology, which was developed by\
 SHARP Corporation for clearly  displaying easy-to-read characters on LCD screens. However, other fonts \
are used for some screen pages, too.
• “x.v.Color” and 
 are trademarks of Sony Corporation.
• Netfl  ix and the Netfl  ix logo are the registered trademarks of Netfl  ix, Inc.
-$  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							Electricity is used to perform many useful functions, but it can also ca\
use personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleani\
ng the product. To ensure your safety 
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully 
before using the product.1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,  and the point where they exit from the apparatus.
11)  Only use attachments/accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by \
the manufacturer, or sold  with the apparatus. When a cart is used, use caution when moving the car\
t/apparatus 
combination to avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to rain o\
r moisture, does not operate 
normally, or has been dropped.
Additional Safety Information
15)  Power Sources—This product should be operated only from the type of power source indicated on the  marking label. If you are not sure of the type of power supply to your home, consult your product dealer or 
local power company. For products intended to operate from battery power, or other sources, refer to the 
operating instructions.
16)  Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this  can result in a risk of fire or electric shock.
17)  Object and Liquid Entry—Never push objects of any kind into this product through openings as they may  touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill 
liquid of any kind on the product.
18)  Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified  service personnel under the following conditions:a)  When the AC cord or plug is damaged,
b)  If liquid has been spilled, or objects have fallen into the product,
c)  If the product has been exposed to rain or water,
d)  If the product does not operate normally by following the operating instructions.\
  Adjust only those controls that are covered by the operating instructions as an improper adjustment  of other controls may result in damage and will often require extensive work by a qualified technician 
to restore the product to its normal operation,
e)  If the product has been dropped or damaged in any way, and
f)  When the product exhibits a distinct change in performance - this indicates a need \
for service.
19)  Replacement Parts—When replacement parts are required, be sure the service technician has used  replacement parts specified by the manufacturer or have the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20)  Safety Check—Upon completion of any service or repairs to this product, ask the service technician to  perform safety checks to determine that the product is in proper operating condition.
21)  Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product 
according to the method recommended by the manufacturer.
 3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To e\
nsure safety and many years 
of trouble-free operation of your product, please read the Important Saf\
ety Instructions carefully before 
using this product.
IMPORTANT SAFETY INSTRUCTIONS
-$  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							IMPORTANT SAFETY INSTRUCTIONS
 4
 Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70,  provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna-discharge unit, connection to grounding 
electrodes, and requirements for the grounding electrode.EXAMPLE OF ANTENNA GROUNDING AS PER 
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA 
LEAD IN WIRE
GROUND 
CLAMP
NEC — NATIONAL ELECTRICAL CODE
GROUNDING 
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING 
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC 
SERVICE 
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
 Water and Moisture — Do not use this product near water - for example\
, near a bath tub, wash bowl, kitchen sink, or 
laundry tub; in a wet basement; or near a swimming pool; and the like.
 Stand — Do not place the product on an unstable cart, stand, tripod o\
r table. Placing the product on an unstable base  can cause the product to fall, resulting in serious personal injuries as\
 well as damage to the product. Use only a cart, 
stand, tripod, bracket or table recommended by the manufacturer or sold \
with the product. When mounting the product 
on a wall, be sure to follow the manufacturers instructions. Use only t\
he mounting hardware recommended by the 
manufacturer.
 Selecting the location — Select a place with no direct sunlight and g\
ood ventilation.
 Ventilation — The vents and other openings in the cabinet are designe\
d for ventilation. Do not cover or block these vents  and openings since insuf cient ventilation can cause overheating and/or shorten the life of the p\
roduct. Do not place 
the product on a bed, sofa, rug or other similar surface, since they can\
 block ventilation openings. This product is not 
designed for built-in installation; do not place the product in an enclo\
sed place such as a bookcase or rack, unless proper 
ventilation is provided or the manufacturers instructions are followed.\
 The Liquid Crystal panel used in this product is made of glass. Therefor\
e, it can break when the product is dropped or  applied with impact. Be careful not to be injured by broken glass pieces\
 in case the panel breaks.
 Heat — The product should be situated away from heat sources such as \
radiators, heat registers, stoves, or other  products (including ampli ers) that produce heat.
 The Liquid Crystal panel is a very high technology product with 2,073,60\
0 pixels, giving you  ne picture details.
  Occasionally, a few non-active pixels may appear on the screen as a \
 xed point of blue, green or red. Please note that  this does not affect the performance of your product.
 Lightning — For added protection for this television equipment during\
 a lightning storm, or when it is left unattended and  unused for long periods of time, unplug it from the wall outlet and disc\
onnect the antenna. This will prevent damage to 
the equipment due to lightning and power-line surges.
 Power Lines — An outside antenna system should not be located in the \
vicinity of overhead power lines or other electric  light or power circuits, or where it can fall into such power lines or c\
ircuits. When installing an outside antenna system, 
extreme care should be taken to keep from touching such power lines or c\
ircuits as contact with them might be fatal.
 To prevent  re, never place any type of candle or  ames on the top or near the TV set.
 To prevent  re or shock hazard, do not place the AC cord under the TV set or other h\
eavy items.
 Do not display a still picture for a long time, as this could cause an a\
fterimage to remain.
 To prevent  re or shock hazard, do not expose this product to dripping or splashing.\
  No objects  lled with liquids, such as vases, should be placed on the product.
 result in  re or electric shock. Exercise special caution when using the product ar\
ound children.
Precautions when transporting the TV
 When transporting the TV, never carry it by holding or otherwise putting\
 pressure onto the display. Be sure to always  carry the TV by two people holding it with two hands — one hand on ea\
ch side of the TV.
Caring for the Cabinet
 Use a soft cloth (cotton,  annel, etc.) and gently wipe the surface of the cabinet.
 Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the\
 components of the main unit cabinet or cause 
cracking.
 Wiping with a hard cloth or using strong force may scratch the surface o\
f the cabinet.
 If the cabinet is very dirty, wipe with a soft cloth (cotton,  annel, etc.) soaked in neutral detergent diluted with water a nd 
thoroughly wrung out, and then wipe with a soft dry cloth.
 The cabinet is primarily made of plastic. Avoid using benzene, thinner, \
and other solvents, as these may deform the  cabinet and cause the paint to peel off.
 Do not apply insecticides or other volatile liquids. 
  Also, do not allow the cabinet to remain in contact with rubber or vinyl\
 products for a long period of time. Plasticizers  inside the plastic may cause the cabinet to deform and cause the paint t\
o peel off.
-$  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							IMPORTANT SAFETY INSTRUCTIONS
 5
Caring for the Liquid Crystal panel
 Turn off the main power and unplug the AC cord from the wall outlet befo\
re handling.
 Gently wipe the surface of the display panel with a soft cloth (cotton,\
  annel, etc.).
  To protect the display panel, do not use a dirty cloth, liquid cleaners,\
 or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the display\
 panel.
 Wiping with a hard cloth or using strong force may scratch the surface o\
f the display panel.
 Use a soft damp cloth to gently wipe the display panel when it is really\
 dirty.
  (It may scratch the surface of the display panel when wiped strongly.)\
 If the display panel is dusty, use an anti-static brush, which is commer\
cially available, to clean it.
 To avoid scratching the frame or screen, please use a soft, lint free cl\
oth for cleaning. Approved cleaning cloths are  available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00\
Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for 
ordering, or VISIT http://www.sharpusa.com/SharpDirect.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUEThe home theater entertainment experience is a growing trend and larger \
 at panel displays 
are popular purchases. However,  at panel displays are not always supported on the proper 
stands or installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookc\
ases, shelves, desks, 
speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES! The consumer electronics industry is committed to making home entertainm\
ent enjoyable 
and safe.
TUNE INTO SAFETY One size does NOT  t all. Follow the manufacturer’s recommendations for the safe install\
ation 
and use of your  at panel display.
Carefully read and understand all enclosed instructions for proper use o\
f this product.
Don’t allow children to climb on or play with furniture and televisio\
n sets.
Don’t place  at panel displays on furniture that can easily be used as steps, such as\
 a chest 
of drawers.
Remember that children can become excited while watching a program, espe\
cially on a 
“larger than life”  at panel display. Care should be taken to place or install the display w\
here it 
cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the \
 at panel display so that 
they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: Use a mount that has been recommended by the display manufacturer and/or\
 listed by an independent laboratory (such 
as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufactu\
rers.
If you have any doubts about your ability to safely install your  at panel display, contact your retailer about professional 
installation.
Make sure that the wall where you are mounting the display is appropriat\
e. Some wall mounts are not designed to be 
mounted to walls with steel studs or old cinder block construction. If y\
ou are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displa\
ys can be heavy.
Note:
 CEA is the preeminent trade association promoting growth in the $161 bil\
lion 
U.S. consumer electronics industry. More than 2,200 companies enjoy the \
bene ts of 
CEA membership, including legislative advocacy, market research, technic\
al training and 
education, industry promotion and the fostering of business and strategi\
c relationships
.














- $  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							 6
Contents
IMPORTANT INFORMATION ..................... 1
Trademarks  ....................................... 2
DEAR SHARP CUSTOMER  ....................... 3
IMPORTANT SAFETY INSTRUCTIONS  ........ 3-5
Supplied Accessories  ............................ 7
QUICK REFERENCE Attaching the Stand  ............................ 7
QUICK INSTALLATION TIPS  ................... 8
Using the Remote Control Unit  ................. 8
Preparation Antennas  ....................................... 9
Installing Batteries in the Remote Control Unit  ... 9
Part Names TV (Front)  ..................................... 10
TV (Rear)  ...................................... 10
Remote Control Unit  ........................... 11
Introduction to Connections Experiencing HD Images  ...................... 12
Types of Connection  .......................... 12
Displaying an External Equipment Image  ....... 12
Connecting to External Equipment Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box  ...........13-14
Connecting a VCR, Game Console,  Camcorder or Cable/Satellite Set-top Box  .... 14
Connecting an Audio Ampli er  ................. 15
Connecting a PC  .............................. 16
Watching TV Turning On/Off the Power  ..................... 17
Initial Installation  ............................... 17
Direct Button Operation Changing Channels    ....................... 18
Changing Volume  .......................... 18
MUTE  ...................................... 18
Sleep Timer  ................................ 18
FLASHBACK  ............................... 18
SURROUND  ............................... 18
FREEZE  .................................... 18
INPUT  ...................................... 19
AV MODE  .................................. 19
AUDIO  ..................................... 19
DOCK  ...................................... 20
POWER SAVING  ........................... 20
Closed Captions and  Digital Closed Captions  ................... 20
VIEW MODE  ............................... 21 On-Screen Display Menu
On-Screen Display Menu Operation  ........... 22
Menu Operation Buttons  ...................... 22
Menu Items  ................................... 23
Picture Settings  ............................ 24-25
Audio Settings  ................................ 26
Power Control  ................................. 27
System Options  ............................ 28-30
Initial Setup
................................. 30-33
Information  ................................. 34-36
Enjoying Photo and Music Playback Viewing Photos and Listening to Music  ........ 37
Photo Mode  ................................ 38-39
Music Mode  ................................... 40
USB Memory Device Compatibility  ............. 40
Other Viewing Options Presetting Remote Control Function  ........... 41
Operating the Connected Equipment  .......41-42
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK  ....................... 43-45
Link Operation Menu  ....................... 45-46
Using a PC Displaying a PC Image on the Screen  .......... 47
Adjusting the PC Image  ....................... 48
Setting Audio Input  ............................ 48
PC Compatibility Chart  ........................ 48
RS-232C Port Speci cations  .................. 49
Using the Internet Internet Setup  .............................. 50-51
Displaying Updated Information and  Support Service  ............................. 51
Entering Text (Software Keyboard)  ............. 52
Using the Browser  .......................... 53-56
Instantly Watching Movies from Net ix  ......57-59
Appendix Removing the Stand  ........................... 60
Setting the TV on the Wall  ..................... 61
Troubleshooting  ............................ 62-63
Troubleshooting - Error Message  .............. 63
Speci cations  .............................. 64-65
Optional Accessory  ............................ 65
Information on the Software License for  This Product  ................................. 66
Calling for Service  ............................... 67
LIMITED WARRANTY  ............................ 67
Dimensional Drawings
The dimensional drawings for the LCD TV set are shown 
on the inside back cover.
- $  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC


   


   



 
						

							 7
1 Confi rm that there are 9 screws (5 short screws 
and 4 long screws) supplied with the stand unit.
2 Attach the supporting post for the stand unit onto 
the base using the box for the stand unit as shown 
below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the 
supporting post in the direction indicated below and 
attach the stand to the TV with the wider side of the 
base facing forward.
Long screws
3 Insert the stand into the openings on the rear of the 
TV.
Soft cushion
•
Attaching the Stand
•  Before attaching (or detaching) the stand, unplug the AC cord.
•  Before performing work spread cushioning over the base area to lay the T\
V on. This will prevent it from being damaged.
CAUTION
•  Attach the stand in the correct direction.
•  Do not remove the stand from the TV unless using an optional wall mount \
bracket to mount it.
•  Be sure to follow the instructions. Incorrect installation of the stand \
may result in the TV falling over.
QUICK REFERENCE
4
 Insert and tighten the 4 screws into the 4 holes on 
the rear of the stand unit.
Short screws
5 1  Insert the stand cover.
 2  Insert the screw to secure the stand cover.
1
2Short screw
 •  
To detach the stand, perform the steps in reverse 
order.
Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit 
(g 1)
Page 8 “AAA” size battery 
(g 2)
Page 9 Stand unit
(g 1)
Page 7
Cable clamp 
(g 1)
Page 8 Operation manual 
(g 1)
■
 Connection guide (
g1) LC-40LE810UN/
LC-46LE810UN/
LC-52LE810UN
 
  Always use the AC cord supplied with the TV.
    •  The illustrations above are for explanation purposes and may vary slight\
ly from the actual accessories.
- $  @ @ @ -&  6 / @& @ J O EE


-$@@@-&6/@&@JOEE


   


   



 
						

							 8
QUICK REFERENCE
Using the Remote Control Unit
Use the remote control unit by pointing it towards the 
remote control sensor on the TV. Objects between the 
remote control unit and the remote control sensor may 
prevent proper operation.
30º 30º30º
30º
17´ (5 m)Remote control sensor
■  Cautions regarding the remote control unit
 Do not expose the remote control unit to shock. In addition, 
do not expose the remote control unit to liquids, and do not 
place in an area with high humidity.
 Do not install or place the remote control unit under direct  sunlight. The heat may cause deformation of the remote 
control unit.
 The remote control unit may not work properly if the remote  control sensor on the TV is under direct sunlight or strong 
lighting. In such cases, change the angle of the lighting 
or the TV, or operate the remote control unit closer to the 
remote control sensor.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE 
TELEVISION FROM THE OUTLET AND REPEAT THE 
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT 
US AT 1-800-BE-SHARP.
QUICK INSTALLATION TIPS
1 Attach your antenna to the back of the television. 
(See page 9.)
2 Connect the AC plug for the television into the AC 
outlet.
AC outlet
2
1
1
 Place the TV close to the AC outlet, and keep the power 
plug within reach.
  TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT 
TOUCH UN-INSULATED PARTS OF ANY CABLES 
WITH THE AC CORD CONNECTED.
3  Bundle the cords properly with the cable clamp.
4 When turning on the TV for the  rst time, press 
POWER  on the touch sensor panel on the front of 
the TV.
POWER
5  Insert the batteries into the remote control unit. (See 
page 9.)
 Speakers cannot be detached from the TV.
 The TV can be rotated up to 20 degrees to right and left.
- $  @ @ @ -&  6 / @& J O EC 


-$@@@-&6/@&JOEC