Sharp Lc 40le810 Operation Manual


Display settings
Channel display
You can display the channel information by pressing p 
on the remote control unit.
DTV modeATV mode
Audio (ENG)STEREO
Video
Subtitle Off
>> New informationMONOAuto
Subtitle
Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.
Time display in channel informationYou can display the time information included in DTV and 
teletext broadcasts.
NOTESkip step 1 if receiving DTV broadcasts.
Select a TV channel...

0
Setting when using external 
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
Press b to select the input source for 
setting the input signal (“EXT 1” or “EXT 3”) 
from the “INPUT” menu, and then press ;.
Go to “Menu” > “Setup” > “Option” > 
“Terminal setting” > “Input select”.
Item
EXT 1 Y/C, CVBS, RGB
EXT 3 COMPONENT, RGB
NOTEIf no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external...


Additional features
Option
Colour system
You can change the colour system to one that is compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour 
system”.
NOTEThe factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel is 
automatically set. If an image does not display clearly, select 
another colour system (e.g., “PAL”, “SECAM”).
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to...


Connecting a USB device
Connect an USB device to the TV as shown below.
The TV automatically switches to the USB mode when a USB device is inserted in the USB terminal (this does not work when 
using the time shift function).
Depending on the USB device, the TV may not be able to 
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on the 
character set) may not be displayed.
Do not disconnect a USB device or memory...


Photo mode
Viewing thumbnails
This bar is not shown in the “Home network” screen.
Buttons for thumbnail operations
ButtonsDescription
; When selecting a folder icon: Enter this 
directory.
When selecting a photo thumbnail: 
Enlarge the photo.
a/b/c/d (Cursor) Select a desired item.
6 Return to the previous operation.
R button Select/deselect items (4 mark appears 
on the selected items).
G button Select BGM for the slide show.
Y button Start the slide show.
B button Show slide show setup...


Music mode
This bar is not shown in the “Home network” screen.
Buttons for music mode
ButtonsDescription
; When selecting a music file: Play music.
a/b/c/d (Cursor) Select a desired item.
6 Return to the previous operation.
R button Select/deselect items (4 mark appears 
on the selected items).
G button Stop music.
Y button Play/pause music.
B button Show auto play setup options.
NOTEWhen there are invalid music files, the g mark will be displayed 
for the file.
The displayed play time may...


Other useful features
View setting
DivX® setup
This is the function to confirm your registration code. You need to register the code at www.divx.com.
Go to “Menu” > “Setup” > “View setting” > 
“DivX® setup”.
DivX® VOD registrationYou can find your registration code on this menu. You 
need to register the TV at www.divx.com before playing 
the DivX content.
DivX® VOD deregistrationYou can find your deregistration code on this menu. You 
need to deregister the TV at www.divx.com to release the...


Connecting a PC
HDMI connection
PCHDMI 1, 2, 3 or 4

HDMI-certified cable
PC HDMI 2*


ø 3.5 mm stereo 
minijack cableDVI/HDMI cable
When using the HDMI 2 terminal, you must select the proper 
item in the “Audio select” menu depending on the type of HDMI 
cable connected (refer to page 28 for details).
Analogue connection
PC EXT 3*


RGB cableø 3.5 mm stereo 
minijack cable
PC EXT 3*


DVI/RGB conversion 
cableø 3.5 mm stereo 
minijack cable
When using the EXT 3 terminal, you...


Adjusting the PC image 
automatically
Option
Auto sync.
This function enables the screen to be automatically adjusted to its best possible condition when the analogue 
terminals of the TV and PC are connected with a 
commercially available DVI/RGB conversion cable, etc.
Press b to select “EXT 3” from the “INPUT” 
menu, and then press ;.
Go to “Menu” > “Setup” > “Option” > 
“Terminal setting” > “Input select” > select 
“RGB”.
Go to “Menu” > “Setup” > “Option” > 
“Terminal setting” > “PC input”...


RS-232C port specifications
PC control of the TVWhen a programme is set, the TV can be controlled 
from the PC using the RS-232C terminal. The input 
signal (PC/video) can be selected, the volume can be 
adjusted and various other adjustments and settings 
can be made, enabling automatic programmed 
playing.
Use an RS-232C serial control cable (cross type) 
(commercially available) for the connections.
NOTEThis operation system should be used by a person 
who is accustomed to using PCs....