Sharp Lc 40le810 Operation Manual


Power save settings
Go to “Menu” > “Setup” > “ECO”.
Setup
No signal off ECO picture control ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off[Disable] [Disable] [Off]
[On]
ECO
ECO picture control
This function automatically detects the image source and decreases the power consumption while keeping the 
brightness of the image unchanged.
NOTEThis function does not work when “AV mode” is set to 
“DYNAMIC (Fixed)” or “AUTO”.
This function does not work when “Energy save” is set to...

0
Channel settings
Setup
Quick start Auto installation View setting
Channel settings
CH list
:Back
:Enter
Menu
Individual setting
View setting
Auto installation
The TV automatically detects and stores all available services in your area. This function also allows you to 
perform the channel setting for digital and analogue 
individually and reconfigure the settings after the initial 
auto installation has been completed.
Go to “Menu” > “Setup” > “View setting” > 
“Auto installation”.
Press c/d to...


Basic adjustment
Manual adjustConfigure various settings for each service using the 
colour (R/G/B) buttons.
Service
no.
Lock
Service
nameLock CH skip Old LCN
CH skipSortDelete
Press a/b to select the desired service.
Press the colour button on the remote control 
unit corresponding with the item you want to 
reconfigure.
The 4 mark indicates the operation is set to on. Each 
time the colour button is pressed, you can switch the 
corresponding operation on/off.
Buttons for “Manual adjust”...


Analogue setting
You can reconfigure the analogue TV channels settings 
automatically or manually.
Additional searchUse this menu to add new services automatically after 
“Analogue search” in the “Auto installation” menu has 
been completed.
Start searching channels after selecting the colour system and 
sound system.
Manual adjustUse this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press 
a/b/c/d to select the channel you want to 
set and then press ;....


Password/Lock settings
View setting
PIN
Allows you to use a PIN to protect certain settings from being accidentally changed.
Go to “Menu” > “Setup” > “View setting” > 
“Individual setting” > “PIN”.
NOTEPIN input is required when executing “PIN”. The default PIN 
is “1234”. To clear the PIN setting (PIN input will no longer be 
needed), refer to CLEARING THE PIN (Page 50).
When selecting “Yes”Register a four-digit password number to use the “PIN” 
function.
Press c/d to select “Yes”, and then...


Basic adjustment
Language settings
View setting
Digital audio language
Set up to three preferred multi audio languages to display if the audio languages are available.
Go to “Menu” > “Setup” > “View setting” > 
“Individual setting” > “Digital audio language”.
Switching the multi audio languagesEach time you press 7 on the remote control unit, the 
audio language switches.
View setting
Subtitle
Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display...


Time shift
This function enables you to pause the digital TV 
programme you are watching and start watching it again 
from the paused scene. This function is available only for 
the 820 model series.
Press READY.The TV starts temporary recording of the real time 
broadcast in the background.
Time shift recordable time is approximately 150 
minutes for SD or 60 minutes for HD (depending on 
the programmes).
Press I.The TV shows the programme from the scene that the 
TV started recording and the...


Useful viewing functions
Display information regarding time shift
Channel display
Channel information displays by pressing p on the remote 
control unit.
Audio (ENG)STEREO
Video
Subtitle Off
>> New information
The time shift ready icon shows up when 
READY is pressed and the TV is recording the 
programme.
The status icon shows up depending on what is 
shown on the screen.
Counter
The counter displays when you set “On” in “Display the Time 
shift memory” (Go to “Setup” > “Option” > “Time...


Selecting the picture size
Selecting the WSS picture size 
automatically
Option
WSS
The “WSS” allows the TV to switch automatically among the different picture size.
Go to “Menu” > “Setup” > “Option” > “WSS”.
NOTEUse “Wide mode” if an image does not switch to the 
appropriate picture size. When the broadcast signal contains no 
“WSS” information, the function will not work even if enabled.
Selecting the WSS picture size 
manually
Option
4:3 mode
The “WSS” signal has 4:3 auto-switching that...


Selecting the recording picture 
size manually
Option
REC picture size
You can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV.
Go to “Menu” > “Setup” > “Option” > 
“Terminal setting” > “REC picture size”.
Setting to “4:3 TV” Setting to “16:9 TV”
NOTEThis function must be set before recording.
Selecting the HDMI picture size 
automatically
Option
HDMI auto view
This function allows you to automatically change to the appropriate picture size...