Sharp Lc 40le810 Operation Manual

LC-40LE820E LC-40LE810E
LC-46LE820E LC-46LE810E
LC-52LE820E
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
LCD RENKLİ TELEVİZYON
КОЛЬОРОВИЙ  ТЕЛЕВІЗОР З 
РІДКОКРИСТАЛІЧНИМ ДИСПЛЕЄМ
ЦВЕТНОЙ ТЕЛЕВИЗОР С  ЖИДКОКРИСТАЛЛИЧЕСКИМ  ДИСПЛЕЕМOPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO...

SPECIAL NOTE FOR USERS IN THE U.K.The mains lead of this product is fitted with a non-rewireable (moulded\
) plug incorporating a 13A 
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  or ASA and of the same rating as above, which is also indicated on the pin fac\
e of the plug, must be 
used.
Always refit the fuse cover after replacing the fuse. Never use the plug\
 without the fuse cover 
fitted.
In the unlikely event of the socket outlet in your home not being...

1
OPERATION MANUALENGLISH
The illustrations and the OSD in this operation manual are for 
explanation purposes and may vary slightly from the actual 
operations.
The examples used throughout this manual are based on the 
LC-46LE820E model.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour 
TV product. To ensure safety and many years of trouble-
free operation of your product, please read Important 
safety precautions carefully before using this product.
Trademarks
“HDMI, the HDMI...


Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use 
liquid cleaners or aerosol cleaners.
•
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. 
Chemicals may cause damage or cracks in the cabinet of the TV.
•
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,...


Part name
Remote control unit
>a (Standby/On)
(Page 14)
ATV
Press to access conventional 
analogue TV mode.
DTV
Press to access digital TV mode.
SAT
This function is not available for the 
820 and 810 model series.
RADIO
DTV: Switch between radio and 
data mode.When only data broadcasting 
(no radio broadcasting) is 
transmitted by DVB, the radio 
broadcasting will be skipped.
AQUOS LINK buttons
If external equipment such as a 
AQUOS BD player is connected via 
HDMI cables and is AQUOS LINK...


TV (front view)
134 586 72
Yl/k (Volume buttons)
!s/r (Programme [channel] 
buttons)
#b (Input source button)
@- (Menu button)


What is the Menu?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” 
enables various settings and adjustments.
Basic operation
Display the Menu screen
Press @ and the “Menu” screen 
displays.
Exit the Menu screen
The operation will exit the “Menu” 
screen if you press > before it is 
completed.
Select an item
The “Menu” is classified by setting categories for improving TV viewing.
Selecting in the Menu Press c/d to select the desired...


Introduction
Operation without a remote control unit
This function is useful when there is no remote control unit within your reach.
Press @- and the “Menu” screen displays.
Press !s/r instead of a/b or Yl/k instead of c/d to select 
the item.
Press  #b  to complete the setting.1
2
3
About the guide display
The guide display below the menu bar shows operations for the OSD.The bar above is an operational guide for the remote control unit. The bar will 
change in accordance with each menu setting...


Attaching the stand unit
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTIONAttach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are nine screws (four long 
screws and five short screws) with the stand 
unit.
Attach the supporting post for the stand unit onto the base using the four long screws...


Using the remote control unit
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size \
alkaline batteries. When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size alkaline batteries.
Place batteries with their terminals corresponding to the (e) 
and (f) indications in the battery compartment.
Close the battery cover.
1
2
•
3...