Sharp Cv10ctxb Manual
Here you can view all the pages of manual Sharp Cv10ctxb Manual. The Sharp manuals for Air Conditioner are available online for free. You can easily download all the documents as PDF.
Page 11
EN-9 ENGLISH hook screw INSTALL POWER CORD HOOK • Attach the hooks to the back of air conditioner with the screws. • When storing or moving the unit, wind the power cord around the hooks.
Page 12
![Page 12
EN-10
AB
ABC E
D
A
B
INSTALL DRAINAGE HOSE
Drainage
1
Remove drain cap from drain port.
2 Attach the drain hose clamp to the back panel of the air conditioner nea\
r the drain port with the screw.
A. Drain capB. Drain portA. Drain portB. Drain hose clamp
A. Rubber plugB. Drain portC. Drain hose
D. Drain hose clipE. Drain hose clamp
3 Attach one end of the drain hose to the drain port with the clip.
4 Insert the rubber plug into the other end of the drain hose and secure with clip.](http://img.usermanuals.tech/thumb/68/87425/w300_cv10ctxb-manual-1502269981_d-11.png "Page 12
EN-10
AB
ABC E
D
A
B
INSTALL DRAINAGE HOSE
Drainage
1
Remove drain cap from drain port.
2 Attach the drain hose clamp to the back panel of the air conditioner nea\
r the drain port with the screw.
A. Drain capB. Drain portA. Drain portB. Drain hose clamp
A. Rubber plugB. Drain portC. Drain hose
D. Drain hose clipE. Drain hose clamp
3 Attach one end of the drain hose to the drain port with the clip.
4 Insert the rubber plug into the other end of the drain hose and secure with clip.")
EN-10 AB ABC E D A B INSTALL DRAINAGE HOSE Drainage 1 Remove drain cap from drain port. 2 Attach the drain hose clamp to the back panel of the air conditioner nea\ r the drain port with the screw. A. Drain capB. Drain portA. Drain portB. Drain hose clamp A. Rubber plugB. Drain portC. Drain hose D. Drain hose clipE. Drain hose clamp 3 Attach one end of the drain hose to the drain port with the clip. 4 Insert the rubber plug into the other end of the drain hose and secure with clip.
Page 13
EN-11 ENGLISH A. Drain portB. Drain hose clamp When COOL or DRY (DEHUMIDIFICATION) is running, condensation will drain to water tank. When water tank is filled, Buzzer will sound 8 times, LED window show error code "H8". In this case, plug out drain hose from fixing clamp,unsecure the clip, pull out the rubber plug from the drain hose, then drain out water in tank. Then reinstall the drainage hose. The unit will resume running after compressor stops for 3 minutes. AB
Page 14
EN-12 INSTALL WINDOW PANEL Installation in a double-hung sash window Hole Projec-tion Insect guard netRain guard "A" "A" Foam seal A (adhesive type) 22"-24" Window panel Window sill 1 Connect the rain guards to the insect guard net. Insert all three projections on each rain guard into the holes in the insect guard net. Side “A” will now be at the top, as indicated in the diagram. 2 Attach the guard combined above to the window panel. Push the insect guard net firmly...
Page 15
EN-13 ENGLISH If the inner width of the window is between24"(609mm) and 36.8"(934mm) inclusive. (1) Open the window sash and place the window panel on the window sill. (2) Slide the adjustment panel to fit the window frame width. (3) Secure the window panel to the sill with 3 screws. If the inner width of the window is between36.8"(934mm) and 48"(1219mm) inclusive. (1) Attach the extension panel to the adjustment panel. (2) Open the window sash and place the...
Page 16
EN-14 INSTALL WINDOW PANEL Installation in a sliding sash window 1 Connect the rain guards to the insect guard net. Insert all three projections on each rain guard into the holes in the insect guard net. Side “A” will now be at the top, as indicated in the diagram. 2 Attach the guard combined above to the window panel. Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel. Side “A” will now be at the top, as indicated in the diagram, when...
Page 17
EN-15 ENGLISH If the inner width of the window is between24"(609mm) and 36.8"(934mm) inclusive. (1) Open the window sash and place the window panel on the window sill. (2) Slide the adjustment panel to fit the window frame width. (3) Secure the window panel to the sill with 3 screws. If the inner width of the window is between36.8"(934mm) and 48"(1219mm) inclusive. (1) Attach the extension panel to the adjustment panel. (2) Open the window sash and place the...
Page 18
EN-16 Exhaust hose Window exhaust adapter A Window exhaust adapterInstallation of the exhaust hose 1 Attach the window exhaust adapter B and C to the exhaust hose. Extend both ends of the exhaust hose and insert them into the window ex-haust adapter A respectively, and turn them until they stop. Make sure they are securely attached. 2 Attach the window exhaust adapter A to the unit. Insert the two projections on the win-dow exhaust adapter A into the two holes on the unit, and firmly attach them to...
Page 19
EN-17 ENGLISH Removal of the exhaust hose 1 Remove the exhaust hose from the window exhaust adapter. 2 Remove the window exhaust adapter A from the unit. Lift up and remove the window exhaust adapter A from the unit by pushing down on the two projections. 1 2 Exhaust hose window exhaust adapter
Page 20
EN-18 CONTROL PANEL DISPLAY & OPERATING INSTRUCTIONS CONTROL PANEL & DISPLAY OPERATING INSTRUCTIONSWhen pressing key, buzzer makes a sound, indicator lamp shows relevant state for 2 seconds. 1. ON/OFF Button Press the button once to manually turn the unit on. Press once more to turn the unit off. 2. "+" , "-" Button In COOL mode, press "-" once, the set temperature will decrease 1º C( F) , press "+" once, the set temperature will increase 1ºC ( F). The set...