Sanyo VPC E60EX User Manual

							45English
FLASH SETTING
3 Toggle the SET button up to set the flash mode.
hEach time the SET button is toggled up, the flash mode changes.
hDisplay the icon for the desired flash mode.
4 Press the shutter button. 
hThe picture is snapped and the flash operates according to the 
selected mode.
HINT 
In the automatic flash mode... 
iIn the automatic flash mode using the LCD monitor, when the shutter 
button is depressed halfway, a k icon appearing on the LCD monitor 
indicates that the flash will operate. 
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English46
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1 Point the camera lens at the 
subject.
hIf the Mode Select Screen or a 
menu screen (Shooting Setting 
Screen) is active, press the MENU 
button to exit it.
2 With the Shooting Setting Screen 
not shown, toggle the SET button to 
the right.
hThe exposure correction bar 
appears.
3 Toggle the SET button to the left or 
right to adjust the exposure.
hThe exposure setting numerical 
value is shown at the left end of the 
exposure bar. The exposure can be 
set to a value from –1.8EV to 
+1.8EV.
hTo cancel the exposure correction 
bar, press the MENU button.
hThe exposure correction setting 
can also be accessed from the 
Shooting Setting Screen (page 60).
HINT
The exposure correction setting is canceled in the following cases:
iWhen the pointer is set to the center position.
iWhen the Option Screen is accessed.
iPress the playback button [H].
iAfter the power is turned off.
MENU button
SET button
Exposure correction barPoin te r
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							47English
SHOOTING (EASY SETTING MODE)
EASY SETTINGS SCREEN
With the Easy Settings Screen, it’s a cinch to get beautiful photos every time, 
simply by selecting the setting that matches your shooting conditions.
1 Press the ON/OFF button to turn the 
camera on, and press the MENU 
button.
hThe Mode Select Screen appears.
2 Toggle the SET button to the left or 
right to select the desired shooting 
mode.
3 Toggle the SET button up.
hThe Easy Settings Screen 
appears.
hToggle the SET button up or down 
to choose either the scene select 
menu or the filter menu.
To exit the Easy Settings ScreenPress the MENU button to return to the Mode Select Screen. Press the 
MENU button again to return to the Shooting Screen.
SCENE:FULL AUTO
USE AUTO SETTINGS
MENU button
SET button ON/OFF button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English48
OVERVIEW OF THE EASY SETTINGS SCREEN
1Scene select menu (page 49)2Filter menu (page 53)
3Remaining battery power 
(page 142)
4HELP display (page 125)
SCENE : FULL AUTO
USE AUTO SETTINGS
.: Full auto photography
/: Sports photography
0: Por trait photography
1: Landscape photography
2: Night view photography 
(Available only when 
shooting single shots)
3: Fireworks photography 
(Available only when 
shooting single shots)
4: Lamp photography 
(Available only when 
shooting single shots)
5: Best shot photography6: No filter
7: Cosmetic filter selected
8: Monochrome filter selected
9: Sepia filter selected
?: Sharpness filter selected
>: Contrast filter selected
@: Color filter selected
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							49English
SCENE SELECT
You can select from various preset settings (aperture, shutter speed, etc.) for 
specific shooting conditions.
1 Display the Easy Settings Screen (page 47).
2 Select the scene select menu.
.: The camera automatically makes 
the optimum settings suitable for 
the surrounding conditions (full 
auto).
/: Capture a split-second image of a 
fast-moving subject (sports mode).
0: Enhance the 3D feeling of the 
subject by blurring the background 
(portrait mode).
1: For beautiful shots of distant 
scenery (landscape mode).
2: Photograph the subject while 
keeping the background night 
scenery (night view mode).
3: For capturing fireworks at night 
(fireworks mode).
4: Photograph in low-light conditions 
(lamp mode).
5: When the shutter button is 
pressed, you can capture 
successive still images as the 
settings change (best shot mode).
SCENE:FULL AUTO
USE AUTO SETTINGS
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English50
3 Select the desired icon from the scene select menu, and press the 
SET button.
hThis completes the scene select setting.
4 Take the picture.
For video clip recording, see page 39.
For still image shooting, see page 33.
hTo return to normal photography, select . from the scene select 
menu, and press the SET button.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							51English
SCENE SELECT
Scene select and operation mode
The scene select functions that are available depend on the active operation 
mode (page 75).
O: Available —: Not available
*: Not available for composite photos.
**: Not available for still images with voice memo.
CAUTION
iWhen capturing images using the lamp 4,fireworks 3 or night view 
2 setting, use a tripod or other method to stabilize the camera.
iA table showing the limitations for settings corresponding to scene select 
icons other than . is on page 167.Operation mode
Single shots 
c
Still images with 
voice memo %Sequen-
tial shots 
PCalendar shot 
&
Composite 
photo -ID photo 
.
Auto .O OOO
Sports /OOO
—
Po r tra it 0O OOO
Landscape
1OOO
—
Night view
2O
—O—
Fireworks
3O
—O—
Lamp 4O
—O*—
Best shot 
5O**
———
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English52
How to use the best shot feature
1 Set the camera to the still image shooting mode, select the best shot 
icon 5 from the scene select menu, and press the SET button.
2 Press the shutter button.
hWhile the settings change, four still 
images are shot in sequence.
hIf the resolution is set to k, the 
setting changes automatically to 
y and the images are captured.
hAfter the images are captured, the 
four still images are displayed on 
the LCD monitor.
3 Toggle the SET button up, down, left and right to move the orange 
frame to the image you wish to save.
hFor a full-size view of the selected image, press the SET button.
hWith the full-size view active, you can toggle the SET button to the left 
or right to view the previous or next image.

h
With all four images showing on the LCD monitor, press the MENU button.
4 With the full-size view of the image 
you wish to save, select “YES”, and 
press the SET button.
hThe image currently displayed is 
saved, and the other images are 
deleted.DELETE OTHER IMAGES?
YES
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							53English
FILTERS
The filter feature changes image characteristics such as color tones, to apply 
unique effects to the photographed image.
1 Display the Easy Settings Screen (page 47).
2 Select the filter menu.
3 Select the desired icon from the filter menu, and press the SET 
button.
hThis completes the filter setting. 6: No filter is used (normal 
photography).
7: Skin tones are enhanced in close-
up shots (cosmetic filter).
8: Snap black-and-white photos 
(monochrome filter).
9: Create a sepia-tone photo (sepia 
filter).
?: Accentuates the outlines in the image (sharpness filter).
>: Accentuates the light and dark areas in the image (contrast filter).
@: Accentuates the colors in the image (color filter).
FILTER : NO
SHOOT WITHOUT
FILTERS
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English54
4 Take the picture.
For video clip recording, see page 39.
For still image shooting, see page 33.
hTo return to normal photography, select 6 from the filter menu, and 
press the SET button.
HINT
iA table showing the limitations for settings corresponding to filter icons 
other than 6 is on page 167.
Downloaded From camera-usermanual.com Sanyo Manuals