Sanyo VPC E60EX User Manual

							115English
COPY DATA
5 Press the SET button.
hThe screen to select the type of 
copy appears.
hThe copy source is shown in the 
background on the screen.
COPY SINGLE:
Copy the data for one image.
COPY ALL:
Copy all the data from the copy 
source to the copy destination.
6 Select the desired type of copy.

1Toggle the SET button to the left or 
right to display the image you wish 
to copy.
2Toggle the SET button up or down 
to select “COPY SINGLE”.

3Toggle the SET button up or down 
to select “COPY ALL”.
7 Press the SET button.
hThe Copy Confirmation Screen 
appears.
hTo continue the copy procedure, 
select “YES” and press the SET 
button.
hTo discontinue the copy procedure 
and return to the screen in step 5, 
select “EXIT” and press the SET 
button, or press the MENU button.
COPY IMAGE
COPY SINGLE
COPY ALL
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English116
SLIDESHOW PLAYBACK 
1 Display PAGE 2 of the Playback Setting Screen (page 87).
2 Select the slideshow icon V, and 
press the SET button.
hThe Slideshow Screen appears.

1Select “TIME” or “EFFECT”, press the SET button.
2Toggle the SET button up or down to select the feature you wish to 
change.
3Press the SET button.
3 Select “START”, and press the SET button.
hSlideshow playback starts.
hTo stop slideshow playback, press the SET button or MENU button.
CAUTION
iVoice memos are not played back during slideshow playback.TIME:Adjust the transition speed 
(the period that an image 
is displayed before it 
changes to the next 
image).
EFFECT:Select a transition effect 
as an image changes to 
the next image.
START:Begin slideshow playback.
EXIT:Return to the Playback 
Setting Screen.
SLIDESHOW
TIME 1SEC
EFFECT
START
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							117English
DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN)
On the Information Screen you can check what the settings were when an 
image was captured.
1 Display the desired image.
2 Press and hold the MENU 
button for at least 
2 seconds.
hThe Information Screen 
appears.
hIf the MENU button is 
pressed again, the 
Information Screen is 
canceled.
1Resolution setting
2Resolution
3Scene select function 
setting
4Filter function setting
5Image number
6Protect setting
7File size
8Aperture value
9Shutter speed
0Exposure correction 
setting
ARemaining card memory
BDate and time of image
CVideo clip mode settings
DResolution and frame 
rate
EFile format
FPlayback time
2816×2112 987KBIRIS
SHUTTER
EXPOSEF3.3
1/30
+0.3
2006.12.25 19:30
INFO
INFO
640×480 30fpsQTM 00:00:1311.9MB
EXPOSE+0.32006.12.25 19:30
INFO
WAV 00:00:03113KB
2006.12.25 19:30



Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English118
OPTION SETTINGS
DISPLAYING THE OPTION SCREEN
The Option Screen is used to adjust various camera settings.
1 Display the Shooting Setting Screen or Playback Setting screen.
hShooting Setting Screen, see page 55
hPlayback Setting Screen, see page 87
2 Toggle the SET button up or down 
to select the PAGE indication.
3 Toggle the SET button to the right.
hThe Option Screen appears.
hIf the SET button is toggled down, 
the Option Screen menu appears.
To exit the Option ScreenTo return to the Shooting Screen or Playback Screen 
→ Press the MENU button.
To return to the Shooting Setting Screen or the Playback Setting Screen 
→ Highlight the PAGE indication, and toggle the SET button to the right.
ADV. SETTINGS
CAMERA SETTINGS
PAGE2 :
:
OPTION
1/3
PAGE1/2 :BAS/ADV SETTINGS
PAGE indication
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							119English
DISPLAYING THE OPTION SCREEN
Overview of the Option Screen
2WAY SHOOT GUIDE
STARTUP DISPLAY
CLOCK SET
OPERATION BEEP
HELP DISP
POST VIEW
ZOOM SETTING
LCD BRIGHTNESS
LANGUAGE
TV SYSTEM
POWER SAVE
FILE NO. RESET
FORMAT
RESET SETTINGS
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English120
12WAY shooting guide 
(page 121)
hEnable or disable the 2WAY 
Shooting Guide.
2Startup display (page 122)
hSelect the display that appears 
when the camera is turned on.
3Date and time setting 
(page 23)
hSet the camera’s internal 
clock.
4Operation sounds setting 
(page 123)
hAdjust the operation sounds 
produced when the camera’s 
buttons are pressed and turn 
the audio guide on or off.
5Help display setting 
(page 125)
hTurn the help display on or off.
6Post-view (page 126)
hSpecify how long a still image 
is displayed on the LCD 
monitor after it is captured.
7Zoom setting (page 127)
hSet the digital zoom and 
optical zoom to ON or OFF.
8
Monitor brightness (page 129)hAdjust the brightness of the 
LCD monitor.9Screen language (page 130)
hSelect the language in which 
the LCD monitor messages 
are displayed.
0TV system setting (page 131)
h
Select the type of TV signal 
that is output from the camera’s 
USB/AV terminal.
APower save function (page 132)hSpecify the time elapsed 
before the power save mode is 
activated.
BFile number reset (page 134)
hSet the file number reset 
function to ON or OFF.
CCard format (page 137)
hReformat the camera’s internal 
memory or the card installed in 
the camera.
DReset camera settings 
(page 139)
hReset the camera to the 
factory-preset settings.
EPAGE display (pages 56, 88 
and 118)
FRemaining battery power 
(page 142)
iIcons 7 through D are displayed when you toggle the SET button up or 
down to scroll.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							121English
SET THE 2WAY SHOOTING GUIDE SETTING
Specify whether, during shooting, the 2WAY Shooting Guide is activated.
1 Display the Option Screen (page 118).
2 Select the 2WAY shooting guide 
icon *, and press the SET button.
hThe 2WAY Shooting Guide Screen 
appears.
ON:The 2WAY Shooting Guide is 
enabled.
OFF:The 2WAY Shooting Guide is 
disabled.
3 Select the desired setting, and press the SET button.
hThe selected 2WAY Shooting Guide setting is set.
HINT
If the 2WAY Shooting Guide does not appear...
iThe 2WAY Shooting Guide does not appear when you are making a 
calendar shot.
ON
OFF
2WAY SHOOT GUIDE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English122
SELECT THE STARTUP DISPLAY
The startup display is the display that appears on the LCD monitor when the 
camera is turned on.
1 Display the Option Screen (page 118).
2 Select the startup display icon +, 
and press the SET button.
hThe Startup Display Setting Screen 
appears.
Xacti:
The Xacti display is shown.
CALENDAR:
The image that was entered for 
today’s date, or the first image for 
the next date to which an image 
was entered, is shown (page 97).
OFF:
No startup display.
3 Select the desired setting, and press the SET button.
hThe selected startup display is set.
Xacti
OFF SCHEDULE
STARTUP DISPLAY
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							123English
OPERATION SOUNDS
This setting allows you to set whether or not a confirming audio signal sounds 
when the operation buttons (shutter button, SET button, MENU button, etc.) 
are pressed, and to adjust the audio signal volume.
1 Display the Option Screen (page 118).
2 Select the operation beep icon ?, 
and press the SET button.
hThe Operation Beep Setting Screen 
appears.
hThe current settings are shown on 
the screen.
hIf “ALL OFF” is selected and the 
SET button pressed, all the 
operation sounds are muted.
hIf “EXIT” is selected and the SET 
button pressed, you are returned to 
the Option Screen.
TURN ON/OFF:
Mute or enable the sound that is 
produced when the power is turned 
on or off.
SHUTTER:
Select the sound that is produced 
when the still image shooting button 
is pressed, or when a photo is 
taken using the self-timer.
KEY SW:
Select the sound that is produced 
when a camera button (SET button, 
MENU button, etc.) is pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio 
help guide.
CHANGE SETTINGS:
Change the settings of the operation sounds.OPERATION BEEPTURN ON/OFF
SHUTTER
KEY SW
AUDIO GUIDE
CHANGE SETTINGSALL OFF
EXIT
:
:
:
:OND
A
ON
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English124
3 Select “CHANGE SETTINGS”, and 
press the SET button.
hThe screen to change the settings 
appears.
4 Toggle the SET button up or down 
to select the desired setting, and 
press the SET button.
hThe screen to select operation 
sounds appears.

hThe respective screen to enable or disable the sound appears.
hToggle the SET button up or down to select the desired setting, 
and press the SET button.
ON:
Activates the sound.
OFF:
Deactivates the sound.

hThe screen to select the operation sounds appears.
hSelect from 8 different sounds (A to H).
hYou can press the shutter button to preview the selected operation 
sound.
hIf “OFF” is selected, no sound is produced.
hToggle the SET button up or down to select the desired setting, 
and press the SET button.

hThe screen to select the volume for the operation sounds appears.
hYou can select an operation sound volume from 1 (minimum) to 7 
(maximum).
hToggle the SET button up or down to select the volume, and press 
the SET button.
5 Select “EXIT”, and press the SET button.
hThe operation sound settings are completed.
TURN ON/OFF
SHUTTER
KEY SW
AUDIO GUIDE
EXIT
OPERATION BEEP 
D
A
ON ON
OPERATION VOL4
Downloaded From camera-usermanual.com Sanyo Manuals