Sanyo VPC E60EX User Manual

							85English
WHITE BALANCE
3 Select the desired icon, and press the SET button.
hThis completes the white balance setting.
hOnce the white balance setting is programmed for the ] icon, it is 
retained even if another white balance setting (>, r, o, p, or 
q) is selected. If you changed to another setting, whenever you 
select the ] icon and press the SET button, the previously 
programmed setting is recalled. 
HINT
To cancel the white balance setting
iPerform step 1, select >, and then press the SET button.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English86
ADDING A VOICE MEMO
In the single-shot still image shooting mode, you can record up to 
approximately 10 seconds of sound (called a “voice memo”) when capturing 
the image. The voice memo is a monaural recording.
1 Set the camera to the still image shooting mode, and display PAGE 
1 of the Shooting Setting Screen (page 55). 
2 Select the capture still image with 
voice memo icon % from the 
operation mode menu, and press 
the SET button.
3 Press the shutter button to capture 
the image, and then talk into the 
microphone. 
hDuring recording, RECORDING 
appears in the upper right area of 
the LCD monitor. 
hTake care not to cover the 
microphone with your fingers.
hA voice memo of up to about 10 
seconds can be recorded. 
hTo end the recording before 10 
seconds has elapsed, press the 
shutter button.
MODEPHOTO WITH AUDIO
Microphone Shutter button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							87English
PLAYBACK
PAGE 1 (BASIC SETTINGS)
DISPLAYING THE PLAYBACK SETTING SCREENS
The Playback Setting Screens are used to adjust your camera’s playback 
settings.
1 Press the playback button [H].
hThe display changes to the 
Playback Screen.
2 Press the MENU button.
hThe Playback Setting Screen 
appears.
To cancel the Playback Setting ScreenWhen the MENU button is pressed, you are returned to the Playback Screen.
PROTECT
Change image
protect setting
MENU button Playback button
[H]
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English88
Switching the page
The Playback Setting Screen consists of two pages: PAGE 1 and PAGE 2.
1 Display a Playback Setting Screen.
2 Toggle the SET button to the left.
hThe Playback Setting Screen 
changes to the other PAGE.
hEach time the SET button is 
toggled to the left, the PAGE 
changes.
Change image
protect setting PROTECT
R O TAT E
Rotate image


Downloaded From camera-usermanual.com Sanyo Manuals 
						

							89English
DISPLAYING THE PLAYBACK SETTING SCREENS
Overview of the Playback Setting Screens
PA G E  1
1Protect (page 91)
hProtect data from accidental 
erasure (write protect).
2Erase (page 93)
hDelete images from the card 
memory.
3Playback volume control 
(page 95)
hAdjust the playback volume for 
video clips and audio data.
4Enter in calendar (page 97)5Add audio track (page 100)
hAdd a voice memo to a 
captured still image.
6Print settings (page 102)
hSpecify the print settings.
7PAGE display (page 88)
8Option icon (page 118)
hDisplay the Option Screen.
9Help display (page 125)
0Remaining battery power 
(page 142)
PROTECT
Change image
protect setting
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English90
PA G E  2
1Rotate image (page 112)
hRotate still images.
2Resize (page 109)
hReduce the resolution of a still 
image.
3Red-eye correction (page 110)
hRepair the red-eye effect to 
make eyes look more natural.
4Extract still image (page 113)
hExtract a still image from a 
video clip.
5Copy image (page 114)6Slideshow (page 116)
hPlay back the images in a 
slideshow format.
7PAGE display (page 88)
8Option icon (page 118)
hDisplay the Option Screen.
9Help display (page 125)
0Remaining battery power 
(page 142)
ROTATE
Rotate image
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							91English
IMAGE PROTECT
Prevent accidental erasure of image and audio data.
1 Display the data that you want to protect from accidental erasure, 
and display PAGE 1 of the Playback Setting Screen (page 87).
2 Select the protect icon A, and 
press the SET button.
h“LOCK?” appears.
hIf the protect mode has already 
been enabled for the data, then 
“UNLOCK?” appears.
3 Toggle the SET button up or down 
to select “YES”, and press the SET 
button.
hThe protect mode is set for the 
data.
hThe protect mark B indicates that 
the data is locked.
hTo return to the Playback Setting 
Screen, press the MENU button.
PROTECT
LOCK?
YES
EXIT
PROTECT
UNLOCK?
YES
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English92
CAUTION
iEven if the protect mode is set for certain data files, they will be erased if 
the card is reformatted (page 137).
HINT
To select a different image in steps 2 and 3...
iToggle the SET button to the left or right.
To cancel the protect mode for an image...
iDisplay the desired data and repeat steps 1 to 3. The protect mark B will 
disappear and the protect mode is canceled.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							93English
ERASING DATA
You can erase data that is stored on the card if you no longer need it. You can 
erase the data one at a time, or all at once.
1 Display PAGE 1 of the Playback Setting Screen (page 87).
2 Select the erase icon c, and press 
the SET button.
hThe Erase Mode Screen appears.
DELETE SINGLE:
Erases one data at 
a time.
DELETE ALL:Erases all the data. 
All images assigned 
to the schedule are 
also erased.
EXIT:Returns to the Playback Setting Screen.
3 Toggle the SET button up or down the select the erase mode, and 
press the SET button.
hThe Erase Confirmation Screen appears.

hToggle the SET button to the left or right to select the data you wish to 
erase.

hToggle the SET button to the left or right confirm that all data is to be 
erased.
DELETE
DELETE SINGLE
DELETE ALL
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English94
4 Toggle the SET button up to select “YES”, and press the SET button.

hThe currently displayed image is deleted.
hTo erase other data, select the data, and press the SET button.

hThe Erase Confirmation Screen again appears. To erase the data, 
select “YES”, and press the SET button. When data erase is 
completed, “NO IMAGE” is shown.
CAUTION
About protected images
iData which is protected from accidental erase cannot be erased. To erase 
protected data, set the protect setting for the data to off (page 91), and 
then follow the data erase procedure.
The schedule shot is also erased.
iIf captured still images were entered in the schedule, the images will also 
be deleted from the schedule when the image data is erased. Please take 
note of this especially when choosing the “DELETE ALL” mode.
iYou can also access the One Erase Confirmation Screen from the 
Playback Screen by toggling the SET button up.
Downloaded From camera-usermanual.com Sanyo Manuals