Sanyo Projector Plv Z60 User Manual
Have a look at the manual Sanyo Projector Plv Z60 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 47
47
Maintenance and Cleaning
When the projection lamp of this projector reaches its end of life,
the LAMP REPLACE indicator emits yellow light. If this indicator
lights yellow, replace the lamp with a new one promptly.
The time when the LAMP REPLACE indicator should light is
depending on the lamp mode.
Follow these steps to replace the lamp.
LampLamp Cover
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a pro\
jection lamp, give the following
information to the...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-46.png "Page 47
47
Maintenance and Cleaning
When the projection lamp of this projector reaches its end of life,
the LAMP REPLACE indicator emits yellow light. If this indicator
lights yellow, replace the lamp with a new one promptly.
The time when the LAMP REPLACE indicator should light is
depending on the lamp mode.
Follow these steps to replace the lamp.
LampLamp Cover
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a pro\
jection lamp, give the following
information to the...")
![Page 48
48
Maintenance and Cleaning
Be sure to reset the lamp replacement counter after the lamp is replaced\
. When the lamp replacement counter is reset, the
LAMP REPLACE indicator stops lighting.
Turn the projector on and press the MENU button to display
the On-Screen Menu. Select the Setting Menu with the
Point
edbuttons. Press the Point 8button to access the
submenu items.
Select Lamp counter reset and then press the the OK or
Point
8buttons. “Lamp replacement counter reset?”
appears. Select [Yes] and...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-47.png "Page 48
48
Maintenance and Cleaning
Be sure to reset the lamp replacement counter after the lamp is replaced\
. When the lamp replacement counter is reset, the
LAMP REPLACE indicator stops lighting.
Turn the projector on and press the MENU button to display
the On-Screen Menu. Select the Setting Menu with the
Point
edbuttons. Press the Point 8button to access the
submenu items.
Select Lamp counter reset and then press the the OK or
Point
8buttons. “Lamp replacement counter reset?”
appears. Select [Yes] and...")
![Page 49
49
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
– Make sure you have properly connected the projector to peripheral equipm\
ent as described in “Connecting to Video
Equipment” and “Connecting to a Computer” on pages 16 – 17. \
– Make sure all equipment is connected to an AC outlet and the power is tu\
rned on.
– When you operate the projector with a computer and it does not project a\
n image, restart the computer.
WARNING:
High...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-48.png "Page 49
49
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
– Make sure you have properly connected the projector to peripheral equipm\
ent as described in “Connecting to Video
Equipment” and “Connecting to a Computer” on pages 16 – 17. \
– Make sure all equipment is connected to an AC outlet and the power is tu\
rned on.
– When you operate the projector with a computer and it does not project a\
n image, restart the computer.
WARNING:
High...")
![Page 50
50
The lamp does not turn on because malfunction occurs or the lamp
reaches its end of life.
Appendix
Check the indicators for projector’s condition.
• • • green
• • • red
• • • off• • •blinking green
*When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator becomes
yellow, replace the projection lamp with a new one promptly. Reset the L\
amp replacement counter after replacing the lamp. The
time when the LAMP REPLACE indicator should light is...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-49.png "Page 50
50
The lamp does not turn on because malfunction occurs or the lamp
reaches its end of life.
Appendix
Check the indicators for projector’s condition.
• • • green
• • • red
• • • off• • •blinking green
*When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator becomes
yellow, replace the projection lamp with a new one promptly. Reset the L\
amp replacement counter after replacing the lamp. The
time when the LAMP REPLACE indicator should light is...")
![Page 53
53
When the input signal is digital from the HDMI terminal, refer to the ch\
art below.
SystemmodeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
––––––59.94/60D-VGA
D-480i 720 x 480––––––59.94/60
D-575i720 x 575––––––50.00
640 x 480
D-480p 720 x 480––––––59.94/60
D-575p720 x 575––––––50.00
System
modeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
D-720p1280 x 720––––––50.00
D-1080i ––––––59.94/60
––––––59.94/60D-720p
1920 x 1080
D-1080i 1920 x 1080––––––50.00
✔Note:
• You might be able to project images even when signals other...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-52.png "Page 53
53
When the input signal is digital from the HDMI terminal, refer to the ch\
art below.
SystemmodeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
––––––59.94/60D-VGA
D-480i 720 x 480––––––59.94/60
D-575i720 x 575––––––50.00
640 x 480
D-480p 720 x 480––––––59.94/60
D-575p720 x 575––––––50.00
System
modeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
D-720p1280 x 720––––––50.00
D-1080i ––––––59.94/60
––––––59.94/60D-720p
1920 x 1080
D-1080i 1920 x 1080––––––50.00
✔Note:
• You might be able to project images even when signals other...")
![Page 55
55
Appendix
The parts listed below are optional. When ordering these parts, specify \
item name and Type No. to the sales dealer.
●Wall Anchor Kit Type No.: POA-CH-EX02
● HDMI Cable Type No.: POA-CA-HDMI
● Component Cable (32.8’/10m) Type No.: POA-CA-COMP10
● Scart-VGA Cable Type No.: POA-CA-SCART
(This cable is used for RGB Scart 21-
Pin Video output of video equipment.)
Optional Parts
512341096781514131112
Pin Configuration
Configurations of Terminals
Computer terminal
Terminal: VGA
Red Input
Ground...](http://img.usermanuals.tech/thumb/67/96049/w64_sanyo-plv-z60-manual_d-54.png "Page 55
55
Appendix
The parts listed below are optional. When ordering these parts, specify \
item name and Type No. to the sales dealer.
●Wall Anchor Kit Type No.: POA-CH-EX02
● HDMI Cable Type No.: POA-CA-HDMI
● Component Cable (32.8’/10m) Type No.: POA-CA-COMP10
● Scart-VGA Cable Type No.: POA-CA-SCART
(This cable is used for RGB Scart 21-
Pin Video output of video equipment.)
Optional Parts
512341096781514131112
Pin Configuration
Configurations of Terminals
Computer terminal
Terminal: VGA
Red Input
Ground...")
51 Appendix Menu Tree AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N Vivid Pure cinemaNaturalLiving Image Image adj.ContrastColor Tint RedGreenBlueSharpnessLamp Control Color temp. Input Component 2 Video / S-Video Component 1 Dynamic ProgressiveGamma RGB (Analog)RGB (Scart) User image 2User image 3User image 4 Creative cinema Lens iris -31 to +31-31 to +31-31 to +31-31 to +31 -31 to +31-31 to +31 HighMidLow 1 Low 3Low 2 Auto 1 -31 to +31-7 to +7Normal Auto 2Eco Off-7 to +7 -63 to 0 L1L2Film Transient improvement Color management Gain R/G/B-15 to +15 Contrast enhancement Offset R/G/B Brightness User Lamp iris Auto black stretch User image 1 Advanced menu Store -15 to +15 Auto1 / Auto 2 / Open / Close Off /L1 / L2 / L3 Off / L1 / L2 / L3 Gamma R/G/B-5 to +5Yes / NoUser image 1 Off / L1 / L2 /L3 User image 2 Quit Computer Quit User image 3User image 4Quit Reset HDMI 2 HDMI 1 Color listList0 / List1 / List2 / List3 / UserDynamic gammaOff / Auto1 / Auto2 Brilliant cinema
52 Appendix Advanced menu EnglishGermanFrenchItalianSpanishPortugueseDutchSwedish ChineseKoreanJapanese 1:L1 2:L1 On / Off User On / Off On / Off On / OffCode 1 Yes / No Keystone HDMI setup1:L2 2:L1 Logo Rear Power off confirmation Power managementRemote control Factory default Code 2 Quit Russian OffMounting Yes / NoLamp counter reset Default ScreenFullFull throughZoomCaption in Natural wide 2 OverscanHorizontalVerticalAuto adj.Fine sync H-sync freq.V-sync freq. Language0 to +10 Resolution for PC input Picture adj. 0 to +31-100 to +100 - - - - Setting Unknown Lamp Time Information Background Menu Position Off CeilingWall Cleaning Yes / NoCapture Test pattern RTest pattern GTest pattern BCheck pattern Panel adjustment NormalNormal throughNatural wide 1 -100 to +100-100 to +100 Total dots SignalPALSECAMNTSCNTSC4.43PAL-MPAL-N480i480p575i575p720p1080iD-VGAD-480iD-480pD-575iD-575pD-720pD-1080i FinnishPolishHungarianRomanian Blue / Logo / BlackDisplayOnCountdown OffOff Shutter demoStart ❖ - - -When 480i/575i input, -8 to +8.❖ ImageScreenInputLamp status 1:L1 2:L21:L2 2:L2 On / OffHighland D-1080p
53 When the input signal is digital from the HDMI terminal, refer to the ch\ art below. SystemmodeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) ––––––59.94/60D-VGA D-480i 720 x 480––––––59.94/60 D-575i720 x 575––––––50.00 640 x 480 D-480p 720 x 480––––––59.94/60 D-575p720 x 575––––––50.00 System modeRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) D-720p1280 x 720––––––50.00 D-1080i ––––––59.94/60 ––––––59.94/60D-720p 1920 x 1080 D-1080i 1920 x 1080––––––50.00 ✔Note: • You might be able to project images even when signals other than above are i\ nputted, however the functions of the projector cou ld be limited. 1280 x 720 Appendix S ystem Mode Chart PLV-Z60 can basically accept the signal from all computers and some vide\ o equipment with V- and H-Frequency mentioned below and less than 100 MHz of Dot Clock. System modeH-Freq. (KHz)V-Freq. (Hz) 640 x 48031.4759.88 640 x 48037.8674.38 640 x 48037.8572.81 640 x 48037.5075.00 640 x 48043.26985.00 640 x 40037.86185.08 720 x 40037.92785.039 800 x 60037.8860.32 800 x 60046.87575.00 800 x 60053.67485.06 800 x 60048.0872.19 800 x 60037.9061.03 800 x 60034.5055.38 800 x 60038.6060.31 800 x 60047.9071.92 800 x 60032.7051.09 System modeH-Freq.(KHz)V-Freq. (Hz) 640 x 48035.0066.67 1152 x 90061.85 832 x 62449.7274.55 66.00 800 x 60035.15656.25 1080i28.1250.00 (Interlace) 72.00 1024 x 76868.67784.997 48.3560.00 1024 x 768 1024 x 768 1024 x 768 60.02375.03 56.4770.07 60.3174.92 1024 x 768 1024 x 768 1024 x 768 44.0054.58 62.0477.07 61.0075.70 1024 x 76863.4879.35 58.03 1152 x 86464.2070.40 1152 x 870 1152 x 900 720p 68.6875.06 61.2065.20 45.0060.00 1024 x 76846.9058.20 1024 x 768 1080i33.7560.00 (Interlace) 848 x 48031.02060.00 1024 x 768 D-1080p ––––––59.94/601920 x 1080 D-1080p1920 x 1080––––––50.00
54 Appendix 0.7” wide TFT Active Matrix type, 3 panels Multimedia Projector 10.2 lbs (5.0 kg) 15.04” x 4.99” x 11.98” (382 mm x 126.8 mm x 304.3 mm) (not including raised portions) 1280 x 720 dots 2,764,800 (1280 x 720 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N H-sync. 15 kHz – 80 kHz, V-sync. 50 Hz – 100 Hz Adjustable from 40” to 300” 41˚F – 95˚F (5˚C – 35˚C) 14˚F – 140˚F (-10˚C – 60˚C) Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries Air Blower Projector Type Net Weight Dimensions (W x H x D) Panel Resolution Number of Pixels Scanning Frequency Projection Image size (Diagonal) Operating Temperature Storage Temperature Accessories LCD Panel System ●The specifications are subject to change without notice. F 2.0 – 3.0 lens with f 21.3 – 42.6 mm with manual zoom and focus 3.9’ – 30.2’ (1.2 m – 9.2 m) 145 W RCA Type x 1 (Video), RCA Type x 3 (Y, Pb/Cb, Pr/Cr) x 2 and Mini D\ IN 4 pin x 1 (S-video) Projection Lens Throw Distance Projection Lamp Video Input Jacks (VGA) HDB 15 Terminal x 1Computer Input Terminal HDMI terminal 19 pin x 2HDMI Input Terminals 0˚ to 7.7˚Feet Adjustment Power Source : AA or LR6 1.5 V ALKALINE Type x 2 Operating Range : 16.4’ (5 m)/±30˚ Dimensions : 1.57” x 0.96” x 5.12” (40 mm x 24.4 mm x 130mm) Net Weight : 3.6 oz (102 g) (including batteries) Remote Control 480i, 480p, 575i, 575p, 720p, and 1080iHigh Definition TV Signal AC 100 – 120 V (2.4 A Max. Ampere), 50/60 Hz (The U.S.A. and Canada) AC 200 – 240 V (1.3 A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.) Voltage and Power Consumption ●LCD panels are manufactured to the highest possible standards. Even thou\ gh 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the chara\ cteristics of the LCD panels. Te chnical Specifications Mini DIN 8 pin x 1Service Port Connector This symbol on the nameplate means the product is Listed by Underwriters\ Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards\ against risk of fire, casualty and electrical hazards. The CE Mark is a Directive conformity mark of the European Community (E\ C). Pixelworks ICs used. Color System
55 Appendix The parts listed below are optional. When ordering these parts, specify \ item name and Type No. to the sales dealer. ●Wall Anchor Kit Type No.: POA-CH-EX02 ● HDMI Cable Type No.: POA-CA-HDMI ● Component Cable (32.8’/10m) Type No.: POA-CA-COMP10 ● Scart-VGA Cable Type No.: POA-CA-SCART (This cable is used for RGB Scart 21- Pin Video output of video equipment.) Optional Parts 512341096781514131112 Pin Configuration Configurations of Terminals Computer terminal Terminal: VGA Red Input Ground (Horiz.sync.) Green Input ----- Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz.sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) ----- Ground/ ----- Vert.sync. ----- 9 13 10 12 11 14 15 13579111315171918161412108642 TMDS Data 2+ Input Ground (TMDS Data 1) Ground (TMDS Data 2) TMDS Data 1+ Input TMDS Data 2- Input TMDS Data 1- Input TMDS Data 0+ Input Ground (TMDS Data 0) 1 5 2 4 3 6 7 8 Ground (TMDS Clock) SCL TMDS Clock- Input ----- ----- SDA Ground (DDC/CEC) 11 15 12 14 13 16 17 19 Pin Type A TMDS Data 0- Input TMDS Clock+ Input 9 10 Plug insert detection19 18+5V Power Pin Configuration Video terminal Terminal: HDMI
56 AppendixDimensions 15.04 (382.0) 11.98 (304.3) Unit: inch (mm) 7.7˚ (Max.) 5.11 (129.8) 5.23 (132.9) Lens Shift Center 2.58 (65.5)Lens Shift Center