Home > Sanyo > Projector > Sanyo Projector Plv 1080hd User Manual

Sanyo Projector Plv 1080hd User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sanyo Projector Plv 1080hd User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Remote Control
    we
    !5
    o LAMP CONTROL button
          Select a lamp mode (pp.23, 29).
    e LIGHT button
      Light up the remote control  buttons for about 10 seconds 
    (p.22).
    !5 COLOR button
      Adjust the color intensity of a projected image (pp.23, 28).
    q POWER ON/STAND-B y button
       Turn the projector on or off (pp.18, 19). 
    !0
    r
    !4
    u
    !6
    t
    o
    !2
    !7
    y
    i
    u BRIGHTNESS button
      Adjust the brightness of a projected image (pp.23, 28).
    !3
    r MENU button
      Open or close the On-Screen Menu (p.20).
    t POINT ed7 8 buttons
      Select an item or adjust the setting values in the On-Screen 
    Menu.
    y SCREEN button
       Select a screen size (pp.22, 35
    ).
    !2 LOGO button
       Display the captured logo (p.23).
    i INPUT buttons
      Select an input source (p.24
    ).
    !8 IMAGE MODE buttons
      Select an image mode (pp.23, 27).
    !6 CONTRAST button
      Adjust the contrast of a projected image (pp.23, 28).
    !7 IMAGE AD j . button
      Display the Image adj. Menu items one at a time and directly 
    adjust the selected items (pp.23, 28).
    @0 OK button
      Execute the selected item or access the sub-menu items (p.20).
    !8
    !0 FREEZE button
      Freeze the projected image (p.23).
    !9  INFO  . button
      Display the input source information (p.43).
    !1
    To ensure safe operation, observe the following precautions:
     – Do not bend, drop, or expose the remote control to 
    moisture or heat.
     –  For cleaning, use a soft dry cloth. Do not apply benzene, 
    thinner, spray, or any other chemicals.
    Part Names and Functions
    q
    !9
    @1
    @0
    !1  NO SHOW button
      Temporarily turn off the projected image (p.23).
    !3 COLOR TEMP  . button
      Adjust the color temperature of a projected image (p.28).
    !4 SHARPNESS button
      Adjust the sharpness of a projected image (pp.23, 29).
    w RESET button
      Reset to the previous figure.
      This function is limited to when selecting the Image Adjustment 
    (pp.28 – 33) and Picture Adjustment (p.34). 
    @1 BACK button
      Return to the previous menu.
    ✔Note: 
    						
    							12
    To ensure safe operation, please observe the following precautions:
     ● Use two (2) AA or LR6 type alkaline batteries.
     ●  Always replace batteries in sets.
     ●  Do not use a new battery with a used battery.
     ●  Avoid contact with water or liquid.
     ●  Do not expose the remote control to moisture or heat.
     ●  Do not drop the remote control.
     ●  If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
     ●  Risk of explosion if battery is replaced by an incorrect type. 
     ●  Dispose of used batteries according to the instructions.  
    Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating 
    range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.
    16.4’
    (5 m)
    30°
    Remote Control Operating Range
    Open the battery 
    compartment lid.Install new batteries 
    into the compartment.Replace the compartment lid.12 3
    * When the batteries of the remote control are replaced, the remote 
    control code automatically returns to the initial code (Code 1) (p.41).
    Remote control
    Part Names and Functions
    Two AA size batteries
    For correct polarity (+ and –), 
    be sure battery terminals are 
    in contact with pins in the 
    compartment.
    Pull  up  the  lid 
    and open it.
    Remote Control Battery Installation
    30° 
    						
    							13
    Projection angle can be adjusted up to 6.5 degrees with the 
    adjustable feet.
    Rotate the adjustable feet and tilt the projector to the proper 
    height; to raise the feet, rotate the both feet clockwise.1
    Adjustable Feet
    To lower or to retract the adjustable feet, rotate the both feet 
    counterclockwise.2
    ✔Note:
    	 •	 The	brightness	in	the	room	has	a	great	influence	on	picture	quality.	It	is	recommended	to	limit	ambient	lighting	in	order	to	 obtain	the	best	image.
    	 •	 All	measurements	are	approximate	and	may	vary	from	the	actual	sizes.
    This projector is designed to project on a flat projection surface having a focus range of 3.9’ (1.2 m) to 30.2’ (9.2 m) at 
    maximum zoom and 7.9’ (2.4 m) to 60.4’ (18.4 m) at minimum zoom. Refer to the figure and table below for the screen size 
    and distance between the projector and screen.
    40” 1
    0 0” 1
    50” 30
    0”
    75”
    50”
    1 50”
    80”
    40”
    30.2’ (9.2 m)
    15.1’ (4.6 m)
    9.8’ (3.0 m)
    7.9’ (2.4 m)
    (Inch Diagonal)
    (Center)
    Max . Zoom
    Min . Zoom3.9’ (1.2 m)
    Adjustable Feet
    Positioning the Projector
    Installation
    Screen Size
    (W x H) mm
    16 : 9 aspect ratio40” 80”100” 150”300”
    886 x 498 1771 x 996
    2214 x 1245 3321 x 1868 6641 x 3736
    Zoom (max)3.9’ (1.2 m) 7.9’ (2.4 m)9.8’ (3.0 m)15.1’ (4.6 m) 30.2’ (9.2 m)
    Zoom (min)7.9’ (2.4 m)16.0’ (4.9 m) 20.0’ (6.1 m) 30.2’ (9.2 m)60.4’ (18.4 m) 
    						
    							14
    The projection lens can be moved up and down or left and right manually with the Lens Shift Rings, enabling you to adjust 
    the position of a projected image. After adjusting the position, lock the lens with the Lens Shift Lock.
    V
    V
    uppermost
    W
    1/2W
    Horizontal Lens Shift Ring 
    (Left/Right)Move the projection lens to the left or right with the Horizontal 
    Lens Shift Ring. 
    Move the projection lens up or down with the Vertical Lens Shift 
    Ring.
    Vertical Lens Shift Ring
    (Up/Down)
    V
    V
    W
    1/2W
    downmost
    leftmost
    rightmost
    Vertical Lens Shift (Up/Down) Horizontal Lens Shift (Left/Right)
    Moving the Lens
    ✔Note:
    	 •	 The	best	image	is	generally	obtained	at	the	central	axis	of	the	lens	shift.
    	 •	 With	maximum	lens	shift	in	each	direction,	image	distortion	may	be	observed	at	the	edge	of	the	screen.	
    	 •	 With	the	maximum	horizontal	lens	shift,	the	maximum	vertical	lens	shift	cannot	be	obtained,	and	vice	versa.
    		 •	 The	Lens	Shift	Rings	are	locked	at	the	factory.	Make	sure	that	the	Lens	Shift	Lock	is	released	before	using	the	Lens	Shift	Rings.	
    Lens Shift Lock
    Before using the 
    Lens Shift Rings, 
    make sure that this 
    lock is released.
    Installation 
    						
    							15
    Video EquipmentS-video 
    Cable 
    S-VIDEO Output
    S-VIDEO
    VIDEO
    Composite 
    Video Output
    Video Cable
    (RCA x 1) 
    Video, S-video
    Use a video cable or a S-video cable (commercially available).
    Unplug the power cords of both the projector and external 
    equipment from the AC outlet before connecting the cables .
    Video Equipment
    Component Video Output (y, Pb/Cb, Pr/Cr)
    COMPONENT
    Component
    Use a component cable (optional).
    Connecting to Video Equipment (Component)
    Component 
    Cable
    (RCA x 3) 
    ✔Note:
    	 •	 To	order	the	optional	cables,	see	page	58.
    	 •	 When	connecting	HDTV	equipment	to	the	projector’s	 COMPONENT	1/2	terminals,	horizontal	line	noise	may	be	noted	
    only	occasionally.	 Then	adjust	the	value	of	Fine	sync.	 The	setting	
    can	be	adjusted	from	0	to	+31	(see	page	34).
    This projector can be connected up to six equipment at one time. See the \
    figures below for the connections.
    Connecting to Video Equipment (Video, S-Video)
    Installation 
    						
    							16
    Connecting to a Computer
    RGB Scart
    Use a Scart-VGA cable (optional).  
    Video Equipment
    COMPUTER
    RGB Scart
    21-pin Output
    Scart-VGA
    Cable
      
    Video Equipment
    HDMI HDMI
    Cable
      
    HDMI
    Use a HDMI cable (optional) for HDMI output. 
    Connecting to Video Equipment (HDMI, RGB Scart)
    HDMI Video 
    Output
    Unplug the power cords of both the projector and external 
    equipment from the AC outlet before connecting the cables .
    ✔Note:
    •	 To	order	the	optional	cables,	see	page	58.
    COMPUTER
    Computer
    Monitor Out
    Computer (Analog)
    Use a VGA cable (commercially available) or a DVI-VGA cable 
    (commercially available).
    DVI-VGA
    Cable VGA
    Cable
    Installation 
    						
    							17
    NOTE ON THE POWER CORD
    AC power cord must meet the requirements of the country where you use the projector.
    Confirm the AC plug type with the chart below and proper AC power cord must be used.
    If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
    Projector sideAC Outlet side
    To POWER CORD 
    CONNECTOR on your 
    projector.
    Ground
    To the AC Outlet.
    (120 V AC)
    For the U .S .A .  and Canada
    This projector uses nominal input voltages of 100 – 120 V AC and it 
    automatically selects a correct input voltage. It is designed to work 
    with the single-phase power systems having a grounded neutral 
    conductor. To reduce the risk of electrical shock, do not plug into 
    any other type of power system.
    If you are not sure of the type of power being supplied, consult 
    your authorized dealer or service station.
    Connect the projector with all peripheral equipment before turning 
    it on.
      CAUTION
    The AC outlet must be near this equipment and must be easily 
    accessible.
    Connecting the AC Power Cord
    Connect the AC power cord (supplied) to the 
    projector.
    Installation
    For safety, unplug the AC power cord when the projector is not 
    in use.
    When the projector is connected to an outlet with the AC 
    power cord and the Main On/Off switch is on, it is in stand-by 
    mode and consumes a little electric power. Turn the Main On/
    Off switch off when the projector is not in use. 
    ✔Note: 
    						
    							18
    Connect the projector’s AC power cord into an AC outlet and 
    turn the Main On/Off switch on. The POWER indicator lights 
    red. 
    Press the POWER ON/STAND-BY button on the top control or 
    on the remote control. 
    The POWER indicator turns green and the cooling fans start to 
    operate. As the automatic slide shutter opens, a preparation 
    display appears on the screen and the countdown starts. 2
    3
    1
    4After the countdown, the input source that was selected the  
    last time appears on the screen. 
    Turning On the Projector
    Complete peripheral connections (with a computer, VCR, 
    etc.) before turning on the projector.  
    Selected Input Source
    OFFON
    Main On/Off switch
    ✔Note:
    	 •	 If	the	automatic	slide	shutter	does	not	open	properly,	the	projector	 will	not	be	turned	on	and	the	POWER	indicator	will	blink	orange.	
    Press	the	POWER	ON/STAND-BY	button	again	to	restart.
    	 •	 When	 “Countdown	off”	or	 “Off”	is	selected	in	the	Display	function,	
    the	countdown	will	not	be	displayed	on	the	screen	(p.40).
    	 •	 During	the	countdown	period,	all	operations	are	invalid.
    	 •	 Image	may	look	dark	for	a	while	after	turning	on	the	projector.	 Lamp	needs	some	time	to	stabilize	after	the	power	is	turned	on.	
    Stored	lamp	mode	and	the	image	mode	will	be	active	after	the	
    lamp	is	stabilized.
    	 •	 When	the	shutter	is	manually	closed	slightly	during	projection,	the	 shutter	will	be	automatically	closed.
    Automatic Slide Shutter
    Do not touch the slide shutter while it is 
    moving, as this could cause injury or the 
    projector to malfunction.
    Use this tab when handling manually.
    Basic Operation
    Top ControlRemote Control
    POWER indicator POWER 
    ON/STAND-B y 
    button 
    						
    							19
    Press the POWER ON/STAND-BY button on the top control 
    or on the remote control. “Power off?” appears on the 
    screen. Press the POWER ON/STAND-BY button again to 
    turn off the projector. 
    When the Power off confirmation function is set to “Off,” 
    the projector can be turned off without the confirmation 
    message. (See “Power off confirmation” on page 40.)
    The automatic slide shutter closes and the POWER indicator 
    starts to blink red. The blinking continues for about 90 
    seconds while the cooling fans are running. 1
    TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR 
    ON, WAIT AT LEAST FIVE (5) MINUTES BEFORE TURNING IT 
    OFF.
    DO NOT PRESS THE MAIN ON/OFF SWITCH TO OFF AND 
    UNPLUG AC POWER CORD WHILE COOLING FANS ARE 
    RUNNING OR BEFORE POWER INDICATOR STOPS BLINKING. 
    OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE.
    2When the projector is cooled down enough to be turned on 
    again, the POWER indicator stops blinking. Then you can turn 
    the Main On/Off switch off and unplug the AC power cord.
    “Power off?” disappears after 4 seconds.
    Turning Off the Projector
    ✔Note:
    	 •	 If	the	automatic	slide	shutter	is	closed	during	operation,	the	 projector	is	automatically	turned	off	for	safety.	Be	sure	to	turn	off	
    the	projector	by	pressing	the	POWER	ON/STAND-BY	button	on	the	
    top	control	or	on	the	remote	control	after	use.		
    	 •	 While	the	POWER	indicator	is	blinking,	the	lamp	is	being	cooled	 down	and	the	projector	cannot	be	turned	on.	 Wait	until	the	POWER	
    indicator	stops	blinking	to	be	turned	on	again.
    	 •	 The	running	speed	of	cooling	fans	is	changed	according	to	the	 temperature	inside	the	projector.	
    	 •	 If	the	 WARNING	indicator	blinks	or	emits	red	light,	see	 “Warning	
    Indicator”	on	page	44.
    	 •	 Do	not	put	the	projector	in	a	case	before	it	is	cooled	enough.
    Basic Operation
    DO NOT OPERATE THE PROJECTOR CONTINUOUSLY 
    WITHOUT REST. CONTINUOUS USE MAY RESULT 
    IN SHORTENING THE LAMP LIFE. TURN OFF THE 
    PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN 
    EVERY 24 HOURS. 
    						
    							20
    Press the MENU button on the top control or on the remote 
    control to display the On-Screen Menu. 
    Use the Point 
    ed buttons to highlight or select a main menu 
    item. Press the Point 
    8 or OK buttons to access the submenu 
    items. (The selected item is highlighted in ORANGE.)
    Press the Point 
    7 button to return to the main menu; press 
    the MENU button again to exit the On-Screen Menu. Use the Point 
    ed buttons to select the desired submenu 
    item and press the Point 
    8 or OK buttons to access the 
    selected item. 
    1
    2
    5
    3
    The projector can be adjusted or set via the On-Screen Menu. 
    The menus have a hierarchical structure, with a main menu that 
    is divided into submenus, which are further divided into other 
    submenus. For each adjustment and setting procedure, refer to 
    respective sections in this manual.Top Control
    Point 
    Right or OK  buttons
    OK button
    POINT buttons
    (arrowhead)
    Remote Control
    MENU button
    How to Operate the On-Screen Menu
    MENU button
    OK button POINT buttons
    (arrowhead)
    On-Screen Menu (Main Menu)
    On-Screen Menu (Submenu) The selected item is 
    highlighted in ORANGE.
    Use the Point 7 8 or OK buttons to adjust the setting or 
    switch between each option and press the Point 
    8 or OK 
    buttons to activate it and return to the submenu.4
    Basic Operation 
    						
    All Sanyo manuals Comments (0)

    Related Manuals for Sanyo Projector Plv 1080hd User Manual