Sanyo Projector Plc Xu88 User Manual

							
71

AppendixAppendix
Technical Specifications
Mechanical Information  
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D) 
335 mm x 79.7 mm x 238.4mm (Not including adjustable feet) 
  Net Weight  3.4 kg
 
  Feet Adjustment  0˚ to 10˚           
              
Panel Resolution  
 LCD Panel System  0.63" TFT Active Matrix type, 3 panels  
  Panel Resolution  1,024 x 768 dots
 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)              
             
Signal Compatibility   
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  High Definition TV Signal  480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
 
 Scanning Frequency  H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz         
 
Optical Information 
 Projection Image Size (Diagonal)  Adjustable from 40” to 300” 
  Throw Distance  4.3'-51.6'(1.1m –13.1 m)           
  Projection Lens  F1.6-2.5 lens with f=17.7 mm–28.3 mm with manual zoom and focus
 
  Projection Lamp  220 W            
  
Interface
 Video Input Jack  RCA Type x 1  
  S-video Input Jack  Mini DIN 4 pin x 1
 
  Audio Input Jacks  RCA Type x 2
 
  Computer Input 1/DVI-I Input Terminal  DVI-I Terminal X 1
 
  Computer Input 2/Component Input /Monitor
   Output Terminal                                                Mini D-sub 15 pin\
 X 1
   Computer/Component Audio Input Jack  Mini Jack (stereo) x 1
 
  Service Port Connector  Mini DIN 8 pin x 1
 
  USB Connector  USB Series B connector x 1 
 
  Audio Output Jack  Mini Jack (stereo) x 1 (variable)           
  LAN Connection Terminal                                100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45
   SD Card Slot 
 
Audio 
 Internal Audio Amp  1.0 W RMS 
  Built-in Speaker  1 speaker, ø1.1"(28 mm) 
 
 
Power
 Voltage and Power Consumption  AC 100–120 V (3.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
                                                      AC 200–240 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
 
         
Operating Environment
 Operating Temperature  41˚F–95˚F (5 ˚C–35 ˚C) 
  Storage Temperature  14˚F–140˚F (-10˚C–60 ˚C)
 
 
Remote Control 
  Battery  AAA or LR03 Type x 2           
  Operating Range  5 m/±30˚
 
  Dimensions  45 mm (W) x 23 mm (H) x 145 mm (D)           
  Net Weight  3.5 oz 99 g (including batteries)           
 Laser Pointer Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)  
						

							
7

Appendix
     Model No.
COMPONENT~VGA Cable     : 
POA-CA-COMPVGA 
SCART~VGA Cable     : 
POA-CA-SCART
VGA-Cable (10 m)   : KA-MC-DB10
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
 Owner’s Manual (CD-ROM)
   Quick Reference Guide 
  AC Power Cord
 
  Remote Control and Batteries                     
  VGA Cable
 Lens Cap with String  
  PIN Code Label
   Lamp Replacement Label 
  Network Application (CD-ROM)                     
● The specifications are subject to change without notice.
●  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are 
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD 
panels.
Appendix 
						

							
7

Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\
rified 
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1
RGB 3
RGB 4
Video
S-video
VIDEO 2
VIDEO 3
VIDEO 1
NETWORK 1Wired
Computer1 
(Digital)
Computer2
Video
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Pj Link Notice
Wireless
Memory viewer
NETWORK 2
STORAGE 1
Parameter
12
11
32
31
13
14
22
23
21
51
52
41
Appendix 
						

							
7

Terminal : Mini DIN 8-PIN
SERVICE PORT CONNECTOR
Vcc
- Data
+ Data
Ground
1



2
3 4
1
R X D
-----
-----
GND
RTS/CTS
GND
GND
1



5
6
7
8
COMPUTER IN  /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input/Output   
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5



6
7
8
+5V Power/-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data/-----
Ground/-----
Vert. sync.
DDC Clock/-----
9
1
10
1
11
1
15
T X D
RX –
TX +
TX –
RX +



8 7 6 5 4 3 2 1
5
6
7
8
1
USB CONNECTOR (Series B)
LAN TERMINAL
-----
-----
----------
DVI-I TERMINAL (DIGITAL/ANALOG) 
1917
21018
31119
41220
51321
61422
71523
81624
C1C2
C3C5C4
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5



6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
1
10
1
11
1
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
1
18
0
19



Analog Red Input
Analog Ground (R/G/B)
Analog Green Input
Analog Horiz. sync
Analog Blue Input
C1
C5
C
C
C
12345876
AppendixAppendix 
						

							
75

AppendixAppendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost 
the number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
Put the label below (supplied) on in a prominent place of the 
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No .
When  using  the  projector  ceiling-mounted,  put  the  Lamp 
replacement  label  (supplied)  on  in  a  prominent  place  of 
the  projector's  body  to  check  the  Replacement  Lamp  Type 
Number.
Lamp Replacement Label
Lamp Replacement Label
*Should  the  four-digit  number  be  changed, 
the factory set number will be invalid. 
						

							
76
Appendix
Dimensions
88.7(3.49)
132.1(5.20
)
246.3(9.70)
106.3(4.19
)
136.3(5.37
)
5(0.2)
45(1.77
)40(1.57
)
47.2(1.86)
3.7(0.15)
4.5(0.18)
90(3.54)
105.5(4.15
)
53.5(2.11)
70(2.76)
55(2.17)
84.7(3.33
)
228(9.0)
10°MAX
Unit: inch(mm)
Screw Holes for Ceiling MountScrew: M4Depth: 0.472(12.0) 
						

							
KD3AC
SANyO Electric Co ., Ltd .