Sanyo Projector Lp Wm5500 Specifications

							 









 
 
Specifications for LP-WM5500 
Product Number  LP-WM5500 
System RGB liquid crystal shutter projection system 
Size  0.75 inch x 3(inorganic), Aspect Ratio 1610 LCD Panel 
Pixel Count  1,024,000 ¢1280 x 800£  x 3, Total pixels 3,072,000 
Projection Lens Power-driven zoom ¢1 - 1.7£, f = 26.9 to 45.4, F = 1.7 to 2.3mm 
Light Source  330W 
Screen Size   
(Projection Distance) 
40” – 400” 1.4m - 24.4m 
100”: 3.6m - 6.0m 
(Projection distance varies depending on the lens) 
Color Reproducibility 
(When projecting video 
signal) Full color (1.07 billion colors) 
Contrast Ratio   
(Full On/Full Off)*1 800:1 
Brightness*1  5,500 ANSI lumens 
Uniformity 90Ë 
Audio Output and Speaker  7W mono , 4cm (circular) x1 
Scanning Frequency (Input) Horizontal: 15 - 100kHz, Vertical: 48 to 100Hz , Dot Clock: 140 MHz or less 
Resolution (resizing)   
(when using RGB signal) 1280 x 800 dots 
¢WUXGA dot resizing possible£ 
PC Input ~Analog RGB input (x 2); D-sub 15; BNC 5-type 
Terminals Video Input 

KDigital input (x 1); HDMI x 1¢Ver. 1.3, Deep Color compatible£ 

KVideo input (x 3); BNC 3-type (VIDEO/Y-Pb/Cb-Pr/Cr),  

















RCA 3-type (VIDEO/Y-Pb/Cb -Pr/Cr), S-video 
Graphical Output 
KAnalog RGB (x 1); D-sub 15*2 
Audio Input/Output 
KAudio input; Stereo mini jack x2,RCA (stereo L (mono), R) x 1 

KAudio output; Stereo mini jack x1 
Controller Input/Output,   
and Other 
KWired remote control connection terminal; Mini jack x1 

KWired LAN; RJ45 (100Base-TX/10Base-T) 

KControl port (x 1); D-sub 9 

KUSB terminal; type B x 1
*3 
Operating Temperature 5 – 40°C 
Power Consumption 406W/490W (Eco/Normal) 
Standby: 0.4W/22W (Eco/Network) 
Power Source AC 100V ¢±10Ë£, 50/60Hz 
Dimensions  489.5mm (w) x 164.0mm (h) x 434.8mm (d) (Including lens) 
Weight 9.7kg 
Main Accessories Removable power cord x1 
Power plug adaptor 
D-sub 15 cable x1 
Warranty 
PIN code-locking label 
Owner’s manual 
Remote control x1 (AAA battery x 2) 
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. 
Measurement method/conditions are based on Appendix 2. 
*2 For analog signals only. Partial restriction is set up for output signals. Not all types of input signals are supported. 
*3 USB interface does not guarantee that every USB device is compatible. 
* All product names and company names are trademarks or registered trademarks of their respective companies. 
* Product appearance and specifications are subject to change without notice.