Sanyo Plc Xu58 Projector User Manual

							61
Appendix
Appendix
Model No.
DVI Cable: KA-DV20
COMPONENT-VGA Cable: POA-CA-COMPVGA
SCART-VGA Cable:POA-CA-SCART
Multi Card Imager Box: POA-BOX20
Compact Flash Card: POA-CFC20
Wired LAN Card: POA-WDC20
Wireless LAN Card: POA-WLC20
When using the Wired or Wireless LAN Card, set the following model name in the PJ Controller operation.
The parts listed below are optionally available.  When ordering those parts, give the item name and Model No. to the sales
dealer.
Optional Parts
(This cable is used for RGB Scart 21-Pin
Video output of video equipment.)
Accessories
Owners Manual
AC Power Cord
Remote Control and Batteries
DVI-VGA Cable
USB Cable
Lens Cover with String and Screw 
Soft Carrying Bag
PIN Code Label
●The specifications are subject to change without notice.
●LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are effective,  a tiny fraction of
the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
●The On-Screen Menu and figures in this manual may differ slightly from the product.  
Model Name: 08-4-1 
						

							62
Terminal : Mini DIN 8-PIN
12345876
SERVICE PORT CONNECTOR
Appendix
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Vcc
- Data
+ Data
Ground
1
2
3
4
USB CONNECTOR (Series B)
2
341
Configurations of Terminals
R X D
-----
-----
GND
RTS / CTS
T X D
GND
GND
Serial
1
2
3
4
5
6
7
8
Red (R/Cr) Input / Output
Ground (Horiz.sync.)
Green (G/Y) Input / Output
-----
Blue (B/Cb) Input / Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
-----
Ground /  -----
Vert. sync.
-----
9
13
10
12
11
14
15
Pixelworks ICs used.
1917
21018
31119
41220
51321
61422
71523
81624
C1
C2
C3
C5C4
Analog Red Input
Analog Ground (R/G/B)
Analog Green Input
Analog Horiz. sync
Analog Blue Input
C1
C5
C2
C4
C3
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5
2
4
3
6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
12
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
21
18
20
19
22
23
24
DVI-I TERMINAL (DIGITAL/ANALOG) 
Terminal : DVI-I 
						

							63
Appendix
Appendix
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the
number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*Should the four-digit number be
changed, the factory set number will
be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector is locked with the PIN code...
PIN Code Lock No.
Logo PIN Code Lock No. 
						

							Printed in Japan
Part No. 610 314 6645 (1AA6P1P4532-- MT7A) 
SANYO Electric Co., Ltd.