Sanyo Plc Xf71 Projector User Manual

							71
Computer Input/Video Input
SettingLanguage
Fan control
Quit
Position/Simple Menu/Quit
Blue/User/Black
Logo select
Capture
Logo PIN code lock
Quit
Auto/Normal/Eco
12 languages provided.
Menu
Logo
Lamp control
Both/Front/Back
Normal/Max
Power management
Background
On/Off
Logo PIN code change
Quit
RC sensor
Off/Ready/Shut down
1–30 Min.
Quit
On/Off
On start
Key lock
SecurityOff
Projector
Remote Control
PIN code lock Off/On1/On2
PIN code change
Used timeFilter counter
Yes/NoFactory default
Off/Countdown Off/On
Display
Off/Default/User
Yes/No
Code 1Remote Control
Code 8
Quit
Yes/No
Quit
8 test patterns providedTest pattern
Quit
Lamp counter
Quit
ResetYes/No
Appendix
Quit
Lamp mode2-Lamp mode/ 1-Lamp mode
Projector ID
Filter control
ShutterProtection
Management
Remote controlOn / Off
ProjectorOn / Off
5 - 180 Min.
Quit
Scrolls remainingScroll(s)
ResetYes/No
Quit
Quit
Yes/No
Quit
1–999
Quit
Lamp 1/2 [  ] Hour(s)
Off/400H/700H/1000H
Reset
[  ] Hour(s) 
						

							72
Indicators and Projector Condition
Check the indicators for the projector condition.  
The projector is operating normally .
• • • on
• • • off• • •  
blinking at the normal rate       
(approx. 1 second ON,         
1 second OFF)
• • • dim
• • •  blinking slow           
(approx. 2 seconds ON, 
2 seconds OFF)
• • • blinking fast              
(approx. 0.5 seconds ON,  
0.5 seconds OFF)
Appendix
Indicators
Projector ConditionLAMP
red READY
green WARNING
TEMP.
red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP. 
orange
The projector is off. (The main On/Off switch is OFF 
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
(The Shutter is open)
The projector is operating normally.
(The Shutter is closed)
The projector is preparing for stand-by or the 
projection lamp is being cooled down. The projector 
cannot be turned on until cooling is completed and 
the READY indicator lights green.
The projection lamp is being cooled down in the 
Power management mode.
The projector is in the Power management mode.
The projection lamp is being cooled down in the 
Shutter management mode.
The projector is in the Shutter management mode.  
Press the ON/STAND-BY button to turn on the 
projector.
The filter is scrolled using the FILTER button on 
the remote control or the Filter control function in 
the setting menu. When the filter is being scrolled, 
the Filter replacement icon and “Please wait...” 
message (Fig. 1) appear on the screen.
✽
✽
✽
✽
Fig .1    Filter replacement icon and “Please wait...”
✽
✽
✽
✽
✽ ✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • Differs according to conditions. 
						

							73
Appendix
The projector is detecting abnormal condition .
Indicators
Projector ConditionLAMPred READY
green WARNING
TEMP.
red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP.
orange
The temperature inside the projector is elevated 
close to the abnormally high level.
The temperature inside the projector is abnormally 
high. The projector cannot be turned on. When 
the projector is cooled down enough and the 
temperature returns to normal, the READY indicator 
lights green and the projector can be turned on. (The 
WARNING TEMP. indicator keeps blinking.) 
The projector has been cooled down enough and 
the temperature returns to normal. When turning on 
the projector, the WARNING TEMP. indicator stops 
blinking. Check and replace the filter.
The lamp cannot light up. (The projector is preparing 
for stand-by or the projection lamp is being cooled 
down. The projector cannot be turned on until 
cooling is completed.)
The lamp cannot light up. (The lamp has been 
cooled down enough and the projector is in stand-
by mode and ready to be turned on with the ON/
STAND-BY button.)
When either of the 2 lamps is out, the projector 
operates with 1 lamp.
The lamp has been used overtime. Replace the 
lamp immediately and then reset the lamp counter. 
The indicator will be turned off after resetting the 
counter.
✽
✽
✽
✽
✽
✽
✽
  When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING 
FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cart\
ridge with a new 
one promptly.  Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59). 
✽
✽
✽
✽
✽
✽ ✽
✽
✽
✽
✽ ✽
✽
✽
wARNING FILTER
 When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps 
with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 55, 61, and 62.
LAMP REPLACE 1 and 2  
						

							74
Appendix
The projector is detecting abnormal condition .
Indicators
Projector ConditionLAMPred READY
green WARNING
TEMP.
red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP.
orange
If the Filter counter reached a time set in the timer 
setting, a Filter replacement icon (Fig.2) appears 
on the screen and the WARNING FILTER indicator 
on the top panel lights up. Replace the filter as 
soon as possible. If the filter is out of scroll and the 
projector reaches a time set in the timer setting, Fig. 
3 appears on the screen and the WARNING FILTER 
indicator lights up. Replace the filter cartridge as 
soon as possible.
If the filter is clogged and no scroll is left in the filter 
cartridge, a Filter cartridge replacement icon (Fig.4) 
appears on the screen and the WARNING FILTER 
indicator lights up. Replace the filter cartridge as 
soon as possible.
✔Note:  • Fig.2, Fig.3 and Fig.4 icon will not appear when 
the Display function is set to “Off” (p.48), or during 
“Freeze” (p.29).
The projector detects an abnormal condition during 
filter scroll.
The projector is being cooled down after detecting 
an abnormal condition during filter scroll.
The projector has been cooled down enough and is 
in the stand-by mode
 after detecting an abnormal 
condition during filter scroll.
The filter cartridge is not installed in the projector. 
Check the filter compartment to see if the filter 
cartridge is installed in the projector. When the filter 
cartridge is installed and the indicators continue to 
light and blink, read the column below.
The projector detects an abnormal condition and 
cannot be turned on. Unplug the AC power cord and 
plug it again to turn on the projector. If the projector 
is turned off again, unplug the AC power cord and 
contact the dealer or the service center. Do not 
leave the projector on. It may cause an electric 
shock or a fire hazard.
The shutter is out of control. 
The shutter is out of control. (The projector is in the 
cooling mode.)
The shutter is out of control. (The projector is in the 
stand-by mode.) In that case, contact the service 
station immediately.
Fig .2    Filter replacement icon
Fig .4    Filter cartridge replacement icon
Fig .3
✽
✽ ✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽ ✽
✽
✽
✽ 
						

							75
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below 
and less than 230 MHz of Dot Clock.
PC Adjustment can be limited when these modes are selected.
Appendix
✽“True” cannot be selected when WUXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected (p.39)
ON-SCREEN DISPLA yRESOLUTION
H-Freq .(kHz)V-Freq .(Hz)
VGA 1 640x480 31.470 59.880 
VGA 2 720x400 31.470 70.090 
VGA 3 640x400 31.470 70.090 
VGA 4 640x480 37.860 74.380 
VGA 5 640x480 37.860 72.810 
VGA 6 640x480 37.500 75.000 
VGA 7 640x480 43.269 85.000 
MAC LC13 640x48034.970 66.600 
MAC 13 640x48035.000 66.670 
480p 640x480 31.470 59.880 
575p 768x575 31.250 50.000 
575i 768x576 
(Interlace) 15.625 
50.000 
480i 640x480 
(Interlace) 15.734 
60.000 
SVGA 1 800x600 35.156 56.250 
SVGA 2 800x600 37.880 60.320 
SVGA 3 800x600 46.875 75.000 
SVGA 4 800x600 53.674 85.060 
SVGA 5 800x600 48.080 72.190 
SVGA 6 800x600 37.900 61.030 
SVGA 7 800x600 34.500 55.380 
SVGA 8 800x600 38.000 60.510 
SVGA 9 800x600 38.600 60.310 
SVGA 10 800x60032.700 51.090 
SVGA 11 800x60038.000 60.510 
MAC 16 832x62449.720 74.550 
XGA 1 1024x768 48.360 60.000 
XGA 2 1024x768 68.677 84.997 
XGA 3 1024x768 60.023 75.030 
XGA 4 1024x768 56.476 70.070 
XGA 5 1024x768 60.310 74.920 
XGA 6 1024x768 48.500 60.020 
XGA 7 1024x768 44.000 54.580 
XGA 8 1024x768 63.480 79.350 
XGA 9 1024x768 
(Interlace) 36.000 
87.170 
XGA 10 1024x768 62.040 77.070 
XGA 11 1024x768 61.000 75.700 
XGA 12 1024x768 
(Interlace) 35.522 
86.960 
XGA 13 1024x768 46.900 58.200 
XGA 14 1024x768 47.000 58.300 
XGA 15 1024x768 58.030 72.000 
MAC 19 1024x768 60.240 75.080 
SXGA 1 1152x864 64.200 70.400 
SXGA 2 1280x1024 62.500 58.600 
SXGA 3 1280x1024 63.900 60.000 
SXGA 4 1280x1024 63.340 59.980 
SXGA 5 1280x1024 63.740 60.010 ON-SCREEN
 DISPLA yRESOLUTION
H-Freq .(kHz)V-Freq .(Hz)
SXGA 6 1280x1024 71.690 67.190 
SXGA 7 1280x1024 81.130 76.107 
SXGA 8 1280x1024 63.980 60.020 
SXGA 9 1280x1024 79.976 75.025 
SXGA 10 1280x960 60.000 60.000 
SXGA 11 1152x900 61.200 65.200 
SXGA 12 1152x900 71.400 75.600 
SXGA 13 1280x1024 
(Interlace) 50.000 
86.000 
SXGA 14 1280x1024 
(Interlace) 50.000 
94.000 
SXGA 15 1280x1024 63.370 60.010 
SXGA 16 1280x1024 76.970 72.000 
SXGA 17 1152x900 61.850 66.000 
SXGA 18 1280x1024 
(Interlace) 46.430 
86.700 
SXGA 19 1280x1024 63.790 60.180 
SXGA 20 1280x1024 91.146 85.024 
SXGA+ 1 1400x1050 63.970 60.190 
SXGA+ 2 1400x1050 65.350 60.120 
SXGA+ 3 1400x1050 65.120 59.900 
SXGA+ 4 1400x1050 64.030 60.010 
SXGA+ 5 1400x1050 62.500 58.600 
MAC 21 1152x870 68.680 75.060 
MAC 1280x960 75.000 75.080 
MAC 1280x1024 80.000 75.080 
WXGA 1 1366x768 48.360 60.000 
WXGA 2 1360x768 47.700 60.000 
WXGA 3 1376x768 48.360 60.000 
WXGA 4 1360x768 56.160 72.000 
WXGA 6 1280x768 47.776 59.870 
WXGA 7 1280x768 60.289 74.893 
WXGA 8 1280x768 68.633 84.837 
WXGA 9 1280x800 49.600 60.050 
WXGA 10 1280x800 41.200 50.000 
WXGA 11 1280x800 49.702 59.810 
WUXGA 1 1920x1200 74.556 59.885 
WSXGA+ 1 1680x1050 65.290 59.954 
WXGA+ 1 1440x900 55.935 59.887 
UXGA 1 1600x1200 75.000 60.000 
UXGA 2 1600x1200 81.250 65.000 
UXGA 3 1600x1200 87.500 70.000 
UXGA 4 1600x1200 93.750 75.000 
UXGA 5 1600x1200 106.250 85.000 
720p 1280x720 45.000 60.000 
720p 1280x720 37.500 50.000 
1035i 1920x1035 
(Interlace) 33.750 
60.000 
1080i 1920x1080 
(Interlace) 33.750 
60.000 
1920x1080  (Interlace) 28.125 
50.000 ✽
✽ ✽ ✽ ✽ 
						

							76
When an input signal is digital from the DVI terminal, refer to the chart below.
Appendix
✔Note:
•Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.
•Specifications are subject to change without notice.
ON-SCREEN DISPLA yRESOLUTION
H-Freq .(kHz)V-Freq .(Hz)
D-VGA 640x480 31.470 59.940 
D-480p 720x480 31.470 59.880 
D-575p 720x575 31.250 50.000 
D-SVGA 800x600 37.879 60.320 
D-XGA 1024x768 43.363 60.000 
D-WXGA 1 1366x76848.360 60.000 
D-WXGA 2 1360x76847.700 60.000 
D-WXGA 3 1376x76848.360 60.000 
D-WXGA 4 1360x76856.160 72.000 
D-WXGA 5 1366x76846.500 50.000 
D-WXGA 6 1280x76847.776 59.870 
D-WXGA 7 1280x76860.289 74.893 
D-WXGA 8 1280x76868.633 84.837 
D-WXGA 9 1280x80049.600 60.050 
D-WXGA 10 1280x80041.200 50.000 
D-WXGA 11 1280x80049.702 59.810 
D-SXGA 1 1280x1024 63.980 60.020 
D-SXGA 2 1280x1024 60.276 58.069 ON-SCREEN 
DISPLA yRESOLUTION
H-Freq .(kHz)V-Freq .(Hz)
D-SXGA+ 1 1400x1050 63.970 60.190 
D-SXGA+ 2 1400x1050 65.350 60.120 
D-SXGA+ 3 1400x1050 65.120 59.900 
D-WSXGA+ 1 1680x105065.290 59.954 
D-WXGA+ 1 1440x90055.935 59.887 
D-720p 1280x720 45.000 60.000 
D-720p 1280x720 37.500 50.000 
D-1035i 1920x1035 
(Interlace) 33.750 
60.000 
D-1080i 1920x1080 
(Interlace) 33.750 
60.000 
1920x1080  (Interlace) 28.125 
50.000 
D-1080psf/30 1920x108033.750 60.000 
D-1080psf/25 1920x108028.125 50.000 
D-1080psf/24 1920x108027.000 48.000  
						

							77
Technical Specifications
Mechanical Information 
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm) (Not including projections) 
  Net Weight  60.85lbs (27.6 kg) 
  Feet Adjustment  0˚ to 2.8˚           
          
Panel Resolution 
 LCD Panel System  1.8” TFT Active Matrix type, 3 panels  
  Panel Resolution  1,024 x 768 dots 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)           
         
Signal Compatibility 
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  High Definition TV Signal  480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
 
 Scanning Frequency  H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–120 Hz      
 
Optical Information 
 Projection Lamp  330 W NSHA lamp x 2           
   
Interface
 Input 1  DVI-D Terminal (Digital), Mini D-Sub 15-pin Terminal (Analog)        
  Input 2  BNC Type x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video     
  Other Jacks  Serial port in (D-sub 9), Serial port out (D-sub 9), USB port,  and \
Wired Remote Jack 
   
Power
 Voltage and Power Consumption  AC 100–120 V (11.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
    AC 200-240 V (5.1A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)   
   
Operating Environment
 Operating Temperature  41˚F–104˚F (5˚C–40˚C) 
  Storage Temperature  14˚F–140˚F (-10˚C–60˚C) 
 
Remote Control 
  Battery  AA or LR6 Type x 2           
  Operating Range  16.4’ (5 m/±30˚) 
  Dimensions  1.79” (W) x 1.03” (H) x 6.24” (D) (45.5 mm x 26.2 mm x 158.5 mm)     
  Net Weight  4.1 oz (117 g) (including batteries) 
 
Accessories
  Owner’s Manual (CD-ROM) 
  Quick Reference Guide 
  AC Power Cord 
  Remote Control and Batteries 
  VGA Cable
  PIN Code Label 
  Lens Attachments (2 types) (For option lens) 
  Light Block Plates (3 types) (For option lens) 
  Spacer (For option lens) 
  Real Color Manager Pro (CD-ROM)  
  Mounting Clamp
Appendix 
						

							78
Optional Parts
       Model No.
Wired Remote Cable(30m)       : POA-CA-RC30 
Optional Interface Board (DVI)       : POA-MD18DVI
Optional Interface Board (5-BNC)       : POA-MD16VD1
Optional Interface Board (D-sub 15)     : POA-MD04VGA
Optional Interface Board (Dual-SDI)    : POA-MD17SDID
Optional Interface Board (Network board)    : POA-MD13NET2
Optional Interface Board (DVI / D-sub 15)    : POA-MD23ADI
Optional Interface Board (5-BNC / VIDEO)    : POA-MD25VD3
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Appendix
l 
The specifications are subject to change without notice.
l  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny 
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
l   Each projector has its own characteristics.
        When projecting with several projectors on the same screen or side by side, you may recognize different white balance 
and color uniformity on each projector. 
						

							79
Configurations of Terminals
ANALOG (Mini D-sub 15 pin)
512341096781514131 112
Red Input
Ground (Horiz.sync.)
Green Input
No Connect
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync.
Ground (Vert. sync.)
DDC Data
Ground
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
CONTROL PORT CONNECTOR (D-sub 9 pin)
-----
R X D
T X D
-----
SG
-----
RTS
CTS
Serial
1
2
3
4
5
6
7
8
DIGITAL DVI-D (DVI 24 PIN)
1917
21018
31 119
41220
51321
61422
71523
81624
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
No Connect
1
5
2
4
3
6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
12
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
21
18
20
19
22
23
24
Vcc
- Data
+ Data
Ground
1
2
3
4
USB CONNECTOR (Series B)
2
34 1
Appendix
-----9 
						

							80
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*  S h o u l d   t h e   fo u r- d i g i t   n u m b e r   b e 
changed,  the  factory  set  number  will 
be invalid.
Put the label below (supplied) on in a prominent place of 
the projector’s body while it is locked with a PIN code. While the projector is locked with the PIN code...
PIN Code Lock No.
Logo PIN Code Lock No.
PIN Code Number Memo
Appendix