Sanyo Plc Xf35n Projector User Manual
Have a look at the manual Sanyo Plc Xf35n Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 COMPUTER INPUT PICTURE IMAGE ADJUSTMENT IMAGE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon.1 2Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame icon to level and press SELECT button. Level being selected. IMAGE SELECT MENU Normal picture level preset on this projector. Standard Picture level with improved halftone for graphics. Real User preset picture adjustment in IMAGE ADJUST Menu (P32). IMAGE 1~4 IMAGE SELECT Menu icon IMAGE LEVEL SELECT (DIRECT) Select image level among Standard, Real, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit.IMAGE button Standard Real Image 1 Image 2 Image 3 Image 4 Normal picture level preset on this projector. Picture level with improved halftone for graphics. User preset picture adjustment in IMAGE ADJUST Menu (P32). Standard Real IMAGE 1~4
32 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon.1 2Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s). Move a red frame pointer to item to be selected and then press SELECT button. IMAGE ADJUST MENU IMAGE LEVEL ADJUSTMENT Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.) Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.) Contrast Brightness Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) Gamma 3 To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to 4 where you want to set and then press SELECT button. Image Level Menu Move a red frame pointer to any of Image 1 to 4 where you want to set and then press SELECT button. Store icon Press SELECT button at this icon to store adjustment. IMAGE ADJUST Menu icon Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Red) Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Green) Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Blue) Selected Image level Press POINT LEFT button to soften image, and POINT RIGHT button to sharpen image. (From 0 to 15.) Sharpness Progressive Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to “Off” and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on. NOTE : Color temp. Press either POINT LEFT button or POINT RIGHT button to Color temp. level that you want to select. (XLow, Low, Mid or High) Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to “On” to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off. Noise reduction Noise reduction can be operated when “RGB”, “480p”, “575p”, “720p (HDTV)”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM MENU (P26) only. Progressive can be operated when “RGB”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM MENU (P26) only.
33 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappears and message “D. Zoom +” is displayed. Press SELECT button to expand image size. And press POINT UP/DOWN/LEFT/RIGHT button(s) to pan image. Panning function can work only when image is larger than screen size. A projected image can be also expanded by pressing D.ZOOM button on Remote Control Unit. 1 To cancel Digital Zoom +/– mode, press any button except D.ZOOM /, SELECT, POINT and AUTO PC ADJ. buttons. Move a red frame to function and press SELECT button. Press POINT DOWN button and move a red frame pointer to function that you want to select and then press SELECT button.2 Wide Digital zoom + NOTE Picture screen adjustment cannot be operated when “720p (HDTV)”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM Menu (P26). True and Digital zoom +/- cannot be selected when “RGB”, “480p” or “575p” is selected on PC SYSTEM Menu (P26). This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset resolution to lower before connecting projector. Image data in other than XGA (1024 x 768) is modified to fit screen size in initial mode. Panning function may not operate properly if computer system prepared on PC ADJUST Menu is used. Provides image to fit screen size. Normal True SCREEN MENU SCREEN Menu icon When Digital zoom – is selected, ON-SCREEN MENU disappears and message “D. Zoom –” is displayed. Press SELECT button to compress image size. A projected image can be also compressed by pressing D.ZOOM button on Remote Control Unit. Digital Zoom – Provides image in its original size. When original image size is larger than screen size (1024 x 768), this projector enters “Digital zoom +” mode automatically. Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
34 SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. Press POINT DOWN button to move a red arrow pointer to Input 2 and then press SELECT button. Source Select Menu will appear. 1 2 Move a pointer to source and press SELECT button. Source Select Menu (VIDEO) Move a pointer to source that you want to select and then press SELECT button.3 When video input signal is connected to VIDEO jack, select Video.Video When video input signal is connected to S-VIDEO jack, select S-Video.S-Video When video input signal is connected to VIDEO/Y, C jacks, select Y, C.Y, C When connecting to those equipment, select a type of Video source in SOURCE SELECT (VIDEO) Menu. WHEN SELECT INPUT 3 (AV TERMINAL ) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. Press POINT DOWN button and a red-arrow icon will appear. Move arrow to Y, Pb/Cb, Pr/Cr and then press SELECT button. 1 3 When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks. WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) Input 2 INPUT MENU Move a pointer to Y, Pb/Cb, Pr/Cr and press SELECT button. INPUT Menu icon Move a pointer (red arrow) to Input 2 and press SELECT button. Source Select Menu Input 3 INPUT MENU INPUT Menu icon Move a pointer (red arrow) to Input 3 and press SELECT button. VIDEO INPUT Press POINT DOWN button to move a red arrow pointer to Input 3 and then press SELECT button. Source Select Menu will appear. 2
35 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT button. 1 2 If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move pointer to system and press SELECT button. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance. When Video System is 1035i, 1080i50 or 1080i60, select system manually first. If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i , 1080i50 or 1080i60. Auto COMPONENT VIDEO SIGNAL FORMAT VIDEO JACK OR S-VIDEO JACK Y, Pb/Cb, Pr/Cr JACKS Projector automatically detects incoming Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually first. Auto AV SYSTEM Menu icon This box indicates system being selected. Move pointer to system and press SELECT button.AV SYSTEM Menu icon This box indicates system being selected. Auto 1080i60 1080i50 720p 575p 480p 575i 480i 1035i
36 VIDEO INPUT PICTURE IMAGE ADJUSTMENT IMAGE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon.1 2Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame pointer to level and press SELECT button. Level being selected. IMAGE SELECT MENU Normal picture level preset on this projector. Standard Picture level adjusted for picture with fine tone. Cinema User preset picture adjustment in IMAGE ADJUST Menu (P38). IMAGE 1~4 IMAGE SELECT Menu icon IMAGE LEVEL SELECT (DIRECT) Select image level among Standard, Cinema, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Normal picture level preset on this projector. Standard Picture level adjusted for picture with fine tone. Cinema User preset picture adjustment in IMAGE ADJUST Menu (P38). IMAGE 1~4 IMAGE button Standard Cinema Image 1 Image 2 Image 3 Image 4
37 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon.1 2Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s). Move a red frame pointer to item to be selected and then press SELECT button. IMAGE ADJUST MENU IMAGE LEVEL ADJUSTMENT Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.) Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.) Contrast Brightness Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) Gamma Press SELECT button at this icon to display other items. IMAGE ADJUST Menu icon Press POINT LEFT/RIGHT buttons to adjust value. Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.) Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.) Color Tint Press POINT LEFT button to soften image, and POINT RIGHT button to sharpen image. (From 0 to 15.) Sharpness Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Red) Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Green) Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Blue) Press SELECT button at this icon to store value. Press SELECT button at this icon to display previous items. Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to “Off” and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on. Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to “On” to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off. Noise reduction Progressive scan NOTE : Tint cannot be adjusted when video system is PAL, SECAM, PAL-M or PAL-N. Progressive cannot be operated when “480p”, “575p” or “720p” is selected on AV SYSTEM MENU (P36). Color temp. Press either POINT LEFT button or POINT RIGHT button to Color temp. level that you want to select. (XLow, Low, Mid or High)
38 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to function that you want to select and then press SELECT button. 1 2 NOTE : SCREEN Menu cannot be operated when “720p”, “1035i”, “1080i50” or “1080i60” is selected on AV SYSTEM Menu (P35). Move a red frame to function and press SELECT button. SCREEN MENU SCREEN Menu icon Provides image at a wide screen ratio of 16 : 9. Wide Provides image at a normal video aspect ratio of 4 : 3. Normal 3 To store adjustment data, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image Level 1 to 4 and then press SELECT button. Image Level Menu Move a red frame pointer to image icon to be set and then press SELECT button. Store icon Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows.
39 SETTING Ceiling When this function is “On,” picture is top/bottom and left/right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “On,” picture is left/right reversed. This function is used to project image to a rear projection screen. Ceiling function Rear function Keystone When image is distorted vertically, select Keystone. ON-SCREEN MENU disappears and Keystone dialog box is displayed. Correct keystone distortion by pressing POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 22. SETTING MENU Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red-frame pointer to SETTING icon.1 2 Language Language used in ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean and Japanese. Display This function decides whether to display On-Screen Displays. On ···shows all On-Screen Displays. Off ····sets On-Screen Displays disappeared except; ON-SCREEN MENU “Power off?” message Set a red frame pointer to item and press SELECT button.Press POINT DOWN button to move a red-frame pointer to item that you want to set and then press SELECT button. Setting dialog box appears. Blue back When this function is “On,” this projector will produce a blue image instead of video noise on screen when any input source is unplugged or turned off. Logo When this function is “On,” projector displays our logo when starting up. When pressing SELECT button at Language, Language Menu appears. Move a pointer to item and then press POINT LEFT/RIGHT button(s). SETTING MENU SETTING Menu icon Optional Control NumberRefer to page 11.
40 SETTING This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows; 1. When any input signal is interrupted, “No signal” and counting down display appears (for 5 minutes). 2. After counting down for 5 minutes, projector lamp and READY indicator are turned off. 3. When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode). In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again. Power management On start When this function is “On,” projector is automatically turned on just by switching MAIN ON/OFF SWITCH on. Note ; Be sure to turn projector off properly (refer to section “TURNING OFF PROJECTOR” on P21). If projector is turned off in wrong steps, On Start function does not operate properly. Time left until Lamp off. Move pointer to item and then press POINT LEFT/RIGHT button(s). Press SELECT button at this icon to display other items. Press SELECT button at this icon to display previous items. On start Remote control This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together. When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.” To change code of Projector;Set Remote control in SETTING MENU to “Code 2.” To change code of Remote Control Unit;Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds. After changing code, make sure Remote Control operates properly. To return to normal code (Code 1), operate both projector and Remote Control in ways above again. NOTE : When batteries of Remote Control Unit are replaced or ALL-OFF switch is turned to “ALL-OFF,” remote transmit code automatically returns to normal code (Code 1). This Projector is equipped with 2 Projection Lamps and a number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintain life of Projection Lamps. To change over Lamp Mode 1. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select SETTING and press SELECT button. Setting dialog box appears. 2. Press POINT DOWN button to move a red frame pointer to “Lamp mode”. Set 2 lamps mode or 1 lamp mode by pressing POINT LEFT/RIGHT button(s). When Lamp Mode is set from 2 lamps mode to 1 lamp mode image becomes little darker. When Lamp Mode is set from 1 lamp mode to 2 lamps mode image become brighter gradually. Lamp Mode NOTE :After changing Lamp Mode, it cannot be switched again for 90 seconds.