Sanyo Plc Ef12nl Projector User Manual
Have a look at the manual Sanyo Plc Ef12nl Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 CONNECTING THE PROJECTOR SIDE OF THE PROJECTOR (CONNECT THE COMPUTER) COMPUTER INPUT-1 TERMINAL (ANALOG HDB 15-PIN) Used to connect a computer to the projector. COMPUTER INPUT-1 TERMINAL (DIGITAL MDR 20-PIN) Used to connect a computer to the projector. COMPUTER INPUT-2 JACKS (BNC TYPE x 5) Used to connect a computer to the projector. MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN) Used to connect a monitor to the projector. COMPUTER AUDIO INPUT-1 JACKS (R and L) Used to connect an audio output from the computer to the projector. COMPUTER AUDIO INPUT-2 JACKS (R and L) Used to connect an audio output from the computer to the projector. AUDIO MONITOR OUTPUT JACKS (R and L) Used to connect an audio input from audio equipment to the projector.CONTROL PORT-1 CONNECTOR Used to connect a mouse cable to the projector. CONTROL PORT-2 CONNECTOR Used to connect a mouse cable to the projector. USB PORT-1 CONNECTOR Used to connect a computer to the projector. USB PORT-2 CONNECTOR Used to connect a computer to the projector. SERIAL PORT TERMINAL (DB9) Used to connect a computer to the projector. WIRED REMOTE JACK When using the wired remote control, connect the remote cable to this jack. USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL10 1 13 11 2 3 4 7 6598 12 1 2 3 4 5 6 8 9 10 11 12 13 7 TERMINAL OF THE PROJECTOR
12 CONNECTING THE PROJECTOR VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RL(MONO)AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RL(MONO)AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RLAUDIO VIDEO IN-1 VIDEO IN-2 MONITOR OUT 14 17 20 1518 19 21 22 16 SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT) VIDEO INPUT JACKS-1 (BNC TYPE x 3) Used to connect a video source to the projector. S-VIDEO INPUT JACK-1 Used to connect a S-VHS video source to the projector. AUDIO INPUT JACKS-1 (R and L) Used to connect an audio source to the projector. VIDEO INPUT JACKS-2 (BNC TYPE x 3) Used to connect a video source to the projector. S-VIDEO INPUT JACK-2 Used to connect a S-VHS video source to the projector.14 15 16 17 18 AUDIO INPUT JACKS-2 (R and L) Used to connect an audio source to the projector. VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3) Permits video connection to a monitor. VIDEO MONITOR (S-VIDEO) OUTPUT JACK Permits S-VHS video connection to a monitor. AUDIO MONITOR OUTPUT JACKS (R and L) Permits audio connection to a monitor.19 20 21 22
13 CONNECTING THE PROJECTOR –––––––– ADB –––––––– –––––––– –––––––– –––––––– –––––––– –––––––– GND –––––––– –––––––– –––––––– Serial PortADB Port 1 2 3 4 5 6 7 8 9 10 11 12PS/2 Port T x D –––––––– –––––––– –––––––– –––––––– –––––––– READY –––––––– GND –––––––– –––––––– –––––––– –––––––– CLK DATA –––––––– –––––––– –––––––– –––––––– –––––––– GND –––––––– –––––––– –––––––– CONNECTING THE COMPUTER Personal computers can be connected to the HDB15-pin (VGA) terminal on the projector. Connect the computer to these terminals using the VGA cable and VGA/MAC adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by any other cable. Digital output signal from the computer can be connected to the DIGITAL terminal (MDR 20-pin). When using this input, Graphic Accelerator Board designed for this projector should be installed into your computer and set-up the computer configuration following instruction included in the Graphic Accelerator Board package. Refer to DIGITAL INPUT CONNECTION on page 16 and 18. Personal computers can be connected to the computer input (Red, Green, Blue, Horiz. Sync. and Vert. Sync.) on the projector. Connect the computer to these jacks using the BNC cables (not provided). Connect audio outputs from your computer to these jacks using the audio cable (not provided). When the computer is operated by projectors remote control unit, connect three different type of cables (provided) between projector control port and computer mouse port or serial port. 1 4 3 7 8 11 12 9 102 5 6 CONTROL PORT A AB CONTROL PORT CABLE REMOVAL HINT Disconnect control port cable with following steps. 1. Hold the portion (A) of the connector with one hand. 2. Pull the portion (B) arrow direction and remove connector. CONNECTING TO THE COMPUTER INPUT 1 TERMINAL (ANALOG HDB 15-PIN) CONNECTING TO THE COMPUTER INPUT 1 TERMINAL (DIGITAL MDR 20-PIN) CONNECTING TO THE COMPUTER INPUT 2 JACKS (BNC x 5) CONNECTING TO THE COMPUTER AUDIO INPUT JACKS (1 and 2) CONNECTING TO THE MULTI-POLE 12-PIN (CONTROL PORT) CONNECTORS (1 and 2) COMPUTER TYPE IBM Compatible computer with PS/2 mouse port. IBM Compatible computer with serial port. Apple Macintosh computer with ADB mouse port. CABLE Mouse Cable for PS/2 port. Mouse Cable for Serial port. Mouse Cable for ADB port.
14 CONNECTING THE PROJECTOR These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1, Computer 2, Video 1 or Video 2). If you have selected program source Computer 2 the audio signal connected to the Computer 2 audio input jack will be available at the audio monitor output jacks. Use RCA type audio for connection. If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective right and left jacks. If the audio input of the audio equipment is monaural, connect it to the left jack. Vcc - Data + Data Ground 1 2 3 4 54321 109876 15 14 13 12 11 2 341 1 2 3 4 5 6 7 8 9 This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2). When video source (Video 1 or Video 2) is selected, this terminal outputs Computer 1 input information. An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector. Connect the monitor to this terminal using the VGA cable (not provided). –––––––– R x D T x D –––––––– Ground –––––––– –––––––– –––––––– –––––––– 1 2 3 4 5 6 7 8 9 SERIAL PORT DB9-PIN TERMINAL USB PORT Pin No./Signal 1 Red input 2 Green input 3 Blue input 4 Sense 2 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue)Pin No./Signal 9 Non Connect 10 Ground (Vert. sync.) 11 Sense 0 12 Sense 1 13 Horiz. sync 14 Vert. sync 15 Reserved HDB 15-PIN TERMINAL CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN) CONNECTING TO THE AUDIO MONITOR OUTPUT (VARIABLE) JACKS CONNECTING TO THE SERIAL PORT (DB 9-PIN) TERMINAL CONNECTING TO THE USB PORT CONNECTORS (1 and 2) If you control the projector by computer, you must connect a cable (not provided) from your computer to this terminal. This port is used to control the projector with the computer. It is also used to control the computer with the Remote control of this projector. (Refer to P49, 50.) Connect the USB port of the computer to this port.
15 CONNECTING THE PROJECTOR USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL COMPUTER OUTPUT (HDB15-PIN TYPE) COMPUTERMONITOR CABLE (NOT PROVIDED) COMPUTER OUTPUT (BNC TYPE x 5) SERIAL PORT INPUTAUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED)COMPUTER AUDIO INPUT 1 or 2 CONTROL PORT OUTPUT 1 or 2 MOUSE CABLE FOR PS/2 PORT (PROVIDED) MOUSE CABLE FOR SERIAL PORT (PROVIDED)PS/2 PORT INPUTVGA CABLE (PROVIDED) L RR L Speaker (L)Speaker (R) Amp.L RR L AUDIO INPUT SPEAKER OUT MONITOR OUTPUT BNC CABLE x 5 (NOT PROVIDED) COMPUTER AUDIO OUTPUT SERIAL PORT CABLE (NOT PROVIDED)SERIAL PORT OUTPUT COMPUTER AUDIO OUTPUT NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. COMPUTER INPUT 1 (ANALOG) CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER COMPUTER INPUT 2
16 CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER (DIGITAL INPUT CONNECTION) CONNECTING THE PROJECTOR USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL COMPUTER MONITOR CABLE (NOT PROVIDED) SERIAL PORT INPUTAUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED)COMPUTER AUDIO INPUT 1 CONTROL PORT OUTPUT 1 MOUSE CABLE FOR PS/2 PORT (PROVIDED) MOUSE CABLE FOR SERIAL PORT (PROVIDED)PS/2 PORT INPUT L RR L Speaker (L) Speaker (R) Amp.L R R L AUDIO INPUT SPEAKER OUT COMPUTER AUDIO OUTPUT SERIAL PORT CABLE (NOT PROVIDED)SERIAL PORT OUTPUT COMPUTER AUDIO OUTPUTCOMPUTER INPUT 1 (DIGITAL)DIGITAL FLAT PANEL CABLE (PROVIDED) NOTE: Before using with digital connection, install (Plug in) Graphic Accelerator Board (included within projector) into PCI bus slot of the computer and set up the computer following instructions in the Graphic Accelerator Board package. GRAPHIC ACCELERATOR BOARD DIGITAL OUTPUT ANALOG OUTPUT INSTALL (PLUG) INTO PCI BUS SLOT NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
17 USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL SERIAL PORT OUTPUT COMPUTER COMPUTER OUTPUT (DB15-PIN TYPE) SERIAL PORT INPUTPS/2 PORT INPUTAUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED)VGA CABLE (PROVIDED) MOUSE CABLE FOR PS/2 PORT (PROVIDED) MOUSE CABLE FOR SERIAL PORT (PROVIDED) R LR L Speaker (L) Speaker (R) Amp.L R R L AUDIO INPUT SPEAKER OUT COMPUTER AUDIO OUTPUT COMPUTER AUDIO INPUT 1 CONTROL PORT OUTPUT 1 COMPUTER AUDIO OUTPUT SERIAL PORT CABLE (NOT PROVIDED) CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER COMPUTER INPUT 1 (ANALOG) NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. CONNECTING THE PROJECTOR
18 USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL Before using with digital connection, install (Plug in) Graphic Accelerator PC card into card bus slot of the computer and set up the computer following instructions in the Graphic Accelerator PC card package. SERIAL PORT OUTPUT COMPUTER SERIAL PORT INPUTPS/2 PORT INPUTAUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED) MOUSE CABLE FOR PS/2 PORT (PROVIDED) MOUSE CABLE FOR SERIAL PORT (PROVIDED) R LR LSpeaker (L)Speaker (R) Amp.L R R L AUDIO INPUT SPEAKER OUT COMPUTER AUDIO OUTPUT COMPUTER AUDIO INPUT 1 CONTROL PORT OUTPUT 1 COMPUTER AUDIO OUTPUT SERIAL PORT CABLE (NOT PROVIDED) COMPUTER INPUT 1 (DIGITAL) DIGITAL FLAT PANEL CABLE (PROVIDED) CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER (DIGITAL INPUT CONNECTION) GRAPHIC ACCELERATOR PC CARD DIGITAL OUTPUT ANALOG OUTPUT INSTALL (PLUG) INTO PC CARD BUS SLOT NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. NOTE: This connection need optionally sold Graphic Accelerator PC card. For this information, contact to your authorized dealer. CONNECTING THE PROJECTOR
19 USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL 123456ON CONTROL PORT OUTPUT 1 or 2 COMPUTER MONITOR CABLE (NOT PROVIDED) COMPUTER OUTPUT (BNC TYPE x 5)BNC CABLE x 5 (NOT PROVIDED) COMPUTER OUTPUT COMPUTER AUDIO OUTPUT1 or 2AUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED) MOUSE CABLE FOR ADB PORT (PROVIDED)COMPUTER INPUT 2 VGA/MAC ADAPTER (PROVIDED) R LR LSpeaker (L) Speaker (R) Amp.L R R L AUDIO INPUT SPEAKER OUT COMPUTER AUDIO OUTPUT SERIAL PORT CABLE (NOT PROVIDED)SERIAL PORT OUTPUT COMPUTER INPUT 1 (ANALOG) CONNECTING A MACINTOSH DESKTOP COMPUTER VGA CABLE (PROVIDED) COMPUTER AUDIO OUTPUTMONITOR OUTPUT ON 2 34 5 6 1 ON OFF VGA/MAC ADAPTER SW1 ~ SW6Set the dip switches as shown in the table below depending on the RESOLUTION MODE that you want to use before you turn on the projector and computer. ADB PORT INPUTADB PORT INPUT SW1 ON OFF OFF ONRESOLUTION MODE 13 MODE (640 x 480) 16 MODE (832 x 624) 19 MODE (1024 x 768) 21 MODE (1152 x 870) SW6 OFF OFF OFF OFF SW5 OFF OFF OFF OFF SW4 OFF ON OFF ON SW3 OFF OFF ON ON SW2 ON ON ON ON NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. CONNECTING THE PROJECTOR
20 USB 1 AUDIO 1RANALOG ANALOG RGB COMPUTER OUTCOMPUTER IN-2 COMPUTER IN-1 RG B H V L (MONO) (MONO)CONTROL PORT 1 USB 2 R/C JACK SERIAL PORTAUDIO 2 AUDIO OUT RL RLCONTROL PORT 2 DIGITAL 123456ON COMPUTER ADB PORT INPUTADB PORT INPUTVGA/MAC ADAPTER (PROVIDED) AUDIO CABLE (NOT PROVIDED) AUDIO CABLE (NOT PROVIDED)VGA CABLE (PROVIDED) MOUSE CABLE FOR ADB PORT (PROVIDED) R LR L Speaker (L) Speaker (R) Amp.RR L AUDIO INPUT SPEAKER OUT COMPUTER OUTPUT COMPUTER AUDIO OUTPUT COMPUTER AUDIO INPUT 1 CONTROL PORT OUTPUT 1 SERIAL PORT CABLE (NOT PROVIDED)COMPUTER AUDIO OUTPUT COMPUTER INPUT 1 (ANALOG) CONNECTING A MACINTOSH POWERBOOK COMPUTER NOTE:The Macintosh PowerBook requires the use of the PowerBook Video Adapter shipped with the PowerBook. SERIAL PORT OUTPUT L ON 2 34 5 6 1 ON OFF VGA/MAC ADAPTER SW1 ~ SW6Set the dip switches as shown in the table below depending on the RESOLUTION MODE that you want to use before you turn on the projector and computer. SW1 ON OFF OFF ONRESOLUTION MODE 13 MODE (640 x 480) 16 MODE (832 x 624) 19 MODE (1024 x 768) 21 MODE (1152 x 870) SW6 OFF OFF OFF OFF SW5 OFF OFF OFF OFF SW4 OFF ON OFF ON SW3 OFF OFF ON ON SW2 ON ON ON ON NOTE:When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. CONNECTING THE PROJECTOR