Sanyo Lp Xw250 Projector Specifications
Have a look at the manual Sanyo Lp Xw250 Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specifications Product Number LP-XW250(W) LP-XW200(W ) System RGB liquid crystal shutter projection system Size 0.55 inch x3, Aspect Ratio 4:3 LCD Panel Pixel Count 786,432 (1024 x 768) x3; Total pixels 2,359,296 Projection Lens Manual Zoom (1 - 1.2x ), f = 18.38 - 22.06 mm, F -= 2.0 - 2.15 Light Source 220W Screen Size (Projection Distance) 40” - 300” 1.3m (wide) - 11.8 m (tele) 100” : 3.3m - 3.9m Color Reproducibility Full color (16.77 million colors) Contrast Ratio (Full On/Full Off)*1 500:1 *2 Brightness*1 2,600 lumens 2,200 lumens Uniformity 85% Audio Output and Speaker 1 W mono 2.8cm (circular) x1 Scanning Frequency Horizontal: 15 - 100kHz, Vertical: 50 - 100Hz, Dot Clock: 140 MHz or les\ s Resolution(resizing) (when using RGB signal) 1024 x 768 dots (UXGA, WXGA, SXGA, XGA, SVGA, VGA, and MAC resizing possible) PC Input ・D-sub 15 x1;Analog RGB input Component with conversion cable* 3 S-Video with conversion cable*3 ・D-sub 15 x1;Analog RGB input For input or monitor out Video Input RCA (Video) x1; Composite video Terminals Audio Input Stereo mini jack x2 Controller Input/Output and Other D-sub 9-pin x1; Control port (RS232C) LAN Wired RJ45 (100Base-TX/10Base-T) Operating Temperature 5 – 35°C Power Consumption 213W/273W/296W (Lamp Mode :Eco/Normal/High ) 212W/239W/272W (Lamp Mode :Eco/Normal/High ) Power Consumption (Standby) 0.4W (Standby Mode: Eco) Power Source AC 100V (±10%), 50/60Hz Dimensions 333.5mm (w) x 85.2mm (h) x 247.0mm (d) (not including protruding parts) Weight 2.5kg Main Accessories Removable power cord x1 Networking software (CD-ROM) D-sub to D-sub cable x1 Lens cap x1 PIN Code label Owner’s manual Wireless remote control x1 (AAA battery x2)
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. Measurement method/conditions are based on Appendix 2. *2. When Lamp Mode “High”, and Image Mode “Dynamic” are selected *3. Optional * All product names and company names are trademarks or registered trademarks of their respective companies. * Product appearance and specifications ar e subject to change without notice.