Sanyo Lp Xm100 Projector Specifications

							Specifications 
Product Number  LP-XM150 (W)  LP-XM100 (W) 
System RGB liquid crystal shutter projection system 
Size  0.8 inch x 3, Aspect Ratio 4:3 LCD Panel 
Pixel Count  786,432 (1024 x 768) x3, Total pixels 2,359,296 
Projection Lens Power-driven zoom (1 - 1.7x), f=26.9 to 45.4, F = 1.8 to 2.3 
Light Source  330W  275W 
Screen Size   
(Projection Distance) 
40” – 400” 1.3m– 22.9m   
100”: 3.4m - 5.7m (Projection distance varies depending on the lens) 
Color Reproducibility 
(When projecting video signal) Full color (1.07 billion colors) 
Contrast Ratio   
(Full On/Full Off)*1 1000:1 
Brightness*1  6,000 ANSI  lumens  5,000 ANSI  lumens 
Uniformity 90% 
Audio Output and Speaker 7W mono 
4cm (circular) x1 
Scanning Frequency Horizontal: 15 - 100kHz, Vertical: 48 - 100Hz, Dot Clock: 140 MHz or less 
Resolution (resizing)   
(when using RGB signal) 1024 x 768 dots 
(WUXGA dot resizing possible) 
PC Input 
KDigital input (x 1); DVI-D (HDCP compatible) 

KAnalog RGB input (x 2); D-sub 15; BNC 5-type Te r m i n a l s  
Video Input 
KVideo input (x 3); BNC 3-type (VIDEO/Y-Pb/Cb-Pr/Cr),  
RCA 3-type (Y/VIDEO-Pb/Cb -Pr/Cr), S-video 
Graphical Output 
KAnalog RGB (x 1); D-sub 15*2 
Audio Input/Output 
KAudio input ; Stereo mini jack x2,RCA (L, R) x 1 
KAudio output; Stereo mini jack x1 
Controller Input/Output,   
and Other 
KControl port (x 1); D-sub 9 

KUSB terminal; type B x 1*3 

KWired remote control connection terminal; Mini jack x1 

KWired LAN; RJ45 (100Base-TX/10Base-T) 
Operating Temperature 5 - 40°C 
Power Consumption 490W 
Standby: 0.35W/18W (Eco/Network) T. B . D  
Power Source AC 100V (±10%), 50/60Hz 
Dimensions  489.5mm (w) x 164.0mm (h) x 434.8mm (d) (Including lens) 
We i g h t  9.7kg 
Main Accessories Removable power cord x1 
Power plug adaptor 
USB cable x1 
D-sub 15 cable x1 
Warranty 
PIN code-locking seal 
Owner’s manual 
Remote control x1    (AAA battery x 2) 
 
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. 
Measurement method/conditions are based on Appendix 2. 
*2 For analog signals only. Partial restriction is set up for output signals. Not all types of input signals are supported. 
*3 USB interface does not guarantee that every USB device is compatible. 
* All product names and company names are trademarks or registered trademarks of their respective companies. 
* Product appearance and specifications are subject to change without notice.