Samsung UE 37D6000 User Manual

							◀▶
English
Installer Mode: Sets limits to the scope of movement of satellite antenna or 
reset the position. Generally, installation guide uses this function.
 
–Limit Position (East / West): Selects the direction of the positioner Limit.
 
–Antenna Position: Adjusts and stores the antenna position for the selected 
satellite.
 
–Store Current Position: Stores the current position as the selected 
positioner Limit.
 
–Go to Zero: Moves the antenna to the reference position.
 
–Reset Positioner Limit: Allows the antenna to rotate over the full arc.
 
●Reset All Setting (Yes / No): All satellite settings will be reset to the initial 
values.
  
						

							◀◀▶
English
 
❑
Other Features
 
OMENU
m 
→  Channel 
→ ENTER
E
 
■
Guide Type (Samsung / Rovi On Screen) 
 for LED 6500 Series and above 
(depending on the country)
You can select a different type of Guide.
 
●Samsung: Uses the guide programme by provided samsung.
 
●Rovi On Screen: Uses the guide programme provided by Rovi International 
Solutions.
 
NROVI EPG initial setting time can take a while depending on the region or 
broadcast environment.
  
						

							◀▶
English
 
■
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done 
automatically during the search and store operation. If the signal is weak or 
distorted, fine tune the channel manually. Scroll to the left or right until the image is 
clear.
 
NSettings are applied to the channel you’re currently watching.
 
NFine tuned channels that have been saved are marked with an asterisk “*” on 
the right-hand side of the channel number in the channel banner.
 
NTo reset the fine-tuning, select Reset.
  
						

							◀▶
English
 
■
Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports 
the channel map. You should connect a USB storage to use this function.
 
●Import from USB: Import channel list from USB.
 
●Export to USB: Export channel list to USB. this function is available when USB 
is connected.
  
						

							◀▶
English
 
❑
Changing the Preset Picture Mode
 
OMENU
m 
→  Picture 
→ Picture Mode 
→ ENTER
E
 
■
Picture Mode  t
Select your preferred picture type.
 
●Dynamic: Suitable for a bright room.
 
●Standard: Suitable for a normal environment.
 
●Natural: Suitable for reducing eye strain.
 
●Movie: Suitable for watching movies in a dark room.
 
●Entertain: Suitable for watching movies and games.
 
NIt is only available when connecting a PC.
Basic Features
  
						

							◀◀▶
English
 
❑
Adjusting Picture Settings
 
■
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) 
Your television has several setting options for picture quality control.
 
NIn analogue TV, Ext., AV  modes of the PAL system, the Tint (G/R) function is 
not available.
 
NWhen connecting a PC, you can only make changes to Backlight, Contrast, 
Brightness and Sharpness.
 
NSettings can be adjusted and stored for each external device connected to the 
T V.
  
						

							◀▶
English
 
❑
Changing the Picture Size
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ ENTER
E
 
■
Screen Adjustment
 
●Picture Size: Your cable box/satellite receiver may have its own set of screen 
sizes as well. However, we highly recommend you use 16:9 mode most of the 
time.
 
–Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
 
–16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
 
–Wide Zoom: Magnifies the picture size more than 4:3. 
 
NAdjusts the Position by using 
u, 
d  buttons.
  
						

							◀◀▶
English
 
–Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
 
NAdjusts the Position or Zoom by using 
u, 
d  button.
 
–4:3: The default setting for a movie or normal broadcasting.
 
NDo not watch in 4:3 format for a long time. Traces of borders 
displayed on the left, right and centre of the screen may cause image 
retention(screen burn) which are not covered by the warranty.
  
						

							◀▶
English
 
–Screen Fit: Displays the full image without any cut-off when HDMI (720p / 
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
 
–Smart View 1: Reduces the 16:9 picture by 50%.
 
–Smart View 2: Reduces the 16:9 picture by 25%.
 
NSmart View 1 is enabled only in HDMI mode.
 
NSmart View 2 is enabled only in HDMI or DTV mode.
 
NThe picture size can vary depending on the input resolution when 
content is played using Videos under Media contents or Smart Hub.
  
						

							◀◀▶
English
 
NNOTE
 
●Depending on the input source, the picture size options may vary.
 
●The available items may differ depending on the selected mode.
 
●When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
 
●Settings can be adjusted and stored for each external device connected to an 
input on the TV.