Samsung UE 37D6000 User Manual

							◀▶
English
 
●If Pure High-throughput (Greenfield) 802.11n mode is selected and the 
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless 
router, Samsung TVs will not support a connection in compliance with new Wi-
Fi certification specifications.
 
●If your wireless router supports WPS (Wi-Fi Protected Setup), you can 
connect to the network via PBC (Push Button Configuration) or PIN (Pe\
rsonal 
Identification Number). WPS will automatically configure the SSID and WPA key 
in either mode.
 
●If your router, modem, or device is not certified, it may not connect to the TV 
via the “Samsung Wireless LAN adapter.”
  
						

							◀▶
English
 
●Connection Methods: You can setup the wireless network connection on five 
ways.
 
–Auto Setup (Using the Auto Network Search function)
 
–Manual Setup
 
–WPS (PBC)
 
–One Foot Connection
 
–Plug & Access
 
–Ad hoc
  
						

							◀▶
English
 
■
Connecting to a Wireless Network   for LED 6500 Series and above  
To connect your TV to your network wireless, you can use a wireless network to 
use the Samsung Wireless LAN adapter where is built-in the TV.
The LAN Port  
on the Wall Wireless IP sharer  
(router having DHCP server) TV
LAN Cable
  
						

							◀▶
English
Samsung Wireless LAN adapter supports the IEEE 802.11a/b/g and n 
communication protocols. Samsung recommends using IEEE 802.11n. When you 
play video over a network connection, the video may not be played smooth\
ly.
 
NNOTE
 
●To use a wireless network, your TV must be connected to a wireless IP sharer 
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV 
can use a DHCP or static IP address to connect to the wireless network. 
 
●Select a channel for the wireless IP sharer that is not currently being used. If the 
channel set for the wireless IP sharer is currently being used by another device 
nearby, this will result in interference and communication failure. 
 
● If you apply a security system other than the systems listed below, it will not 
work with the TV.
  
						

							◀▶
English
 
●If Pure High-throughput (Greenfield) 802.11n mode is selected and the 
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless 
router, Samsung TVs will not support a connection in compliance with new Wi-
Fi certification specifications.
 
●If your wireless router supports WPS (Wi-Fi Protected Setup), you can 
connect to the network via PBC (Push Button Configuration) or PIN (Pe\
rsonal 
Identification Number). WPS will automatically configure the SSID and WPA key 
in either mode.
 
●If your router, modem, or device is not certified, it may not connect to the TV.
  
						

							◀▶
English
 
●Connection Methods: You can setup the wireless network connection on five 
ways.
 
–Auto Setup (Using the Auto Network Search function)
 
–Manual Setup
 
–WPS (PBC)
 
–One Foot Connection
 
–Plug & Access
 
–Ad hoc
  
						

							◀▶
English
 
■
Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that 
access the network to transmit an encrypted security code called an Acce\
ss or 
Security Key. The Security Key is based on a Pass Phrase, typically a wo\
rd or a 
series of letters and numbers of a specified length you were asked to enter when 
you set up security for your wireless network. If you use this method of setting up 
the network connection, and have a Security Key for your wireless network, you 
will have to enter the Pass Phrase during the setup process.
How to set up automatically 1.  Go to Network Setting screen. To enter it, 
follow the directions of Network Setting.
2.  Select the Wireless.
Network Setting
Select a network connection type.
Wired
Previous
Next
CancelWireless(general)
WPS(PBC)
One Foot Connection
Set up a wireless network by 
selecting your access point. You 
may need to enter a security 
key depending on the settings 
of the access point.
 
● The displayed image may differ depending on the 
model.
  
						

							◀▶
English
3. The Network function searches for available wireless networks. When done, it 
displays a list of the available networks.
4.  In the list of networks, press the 
u or 
d 
button to select a network, and then press 
the ENTER E button.
 
NIf the wireless router is set to Hidden 
(Invisible), you have to select Add 
Network and enter the correct Network 
Name (SSID) and Security key to 
establish the connection.
5.  If the Security screen pop-up appears, go 
to step 6. If you select the wireless router which does not have security, go to 
step 7.
 
● The displayed image may differ depending on the 
model.
Network Setting
Enter Access Point Name(SSID) to connect.
a b cd e f1 23
g h ijk l4 56
m no p q r7 89
s tu vw xyz0
a/A DeleteSpace
Previous
Next
Cancel
  
						

							◀▶
English
6. If the wireless router has security, enter the Security key(Security or PIN), then 
select Next.
 
NWhen you enter the Security key(Security or PIN), use 
u / 
d  / 
l / 
r 
buttons on your remote to select number/characters.
 
NYou should be able to find the Pass Phrase on one of the set up screens 
you used to set up your router or modem.
7.  The network connection screen appears, and network setting is done.
 
NIf it fails to set Security key(Security or PIN), select Reset or IP Settings.
 
NIf you want to set connection manually, select the IP Settings. Refer to 
following “How to set up manually”.
  
						

							◀▶
English
 
■
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that 
requires a Static IP address.
Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these 
steps:1.  Right click the Network icon on the bottom right of the screen.
2.  In the pop-up menu that appears, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support Tab, click the Details button. The Network connection values 
are displayed.