Samsung Ud46cb Manual
Have a look at the manual Samsung Ud46cb Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 Source A uto Switch Settings Source AutoSwitch Settings Source AutoSwitch Settings Move Enter Return Source AutoSwitch Primary Source Recovery Primary Source Secondary Source : PC : DVI : On : On On Off - The displayed image may differ depending on the model. - Source A uto Switch Settings is disabled if PIP is set to O n. Source A uto Switch When the Source AutoSwitch is On , the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary Source selection will become active, if no primary video source is available. If the primary or secondary source is not recognized, the display will search again, if no active video is found the display will show the no-input-signal message. When the Primary Source selection is set to All , the display will search all the video source inputs twice in sequence looking for an active video source, returning back to the first video source in the sequence if no video is found. • Off / On ― Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On , the PIP function will not work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work. ― When the Source AutoSwitch selection is On , and or the Primary Source Recovery is On, the display power saving mode becomes inactive. ― When Primary Source Recovery is On , only the Primary Source and Secondary Source selection are available and they are interchangeable and selectable at will. Refer to PIP > Source for compatible signals for each primary input source. Primary Source R ecovery Source AutoSwitch Settings Source AutoSwitch Settings Move Enter Return Source AutoSwitch Primary Source Recovery Primary Source Secondary Source : PC : : On : On On Off - The displayed image may differ depending on the model. When Primary Source Recovery is On , only the Primary Source and Secondary Source video source selection will be searched for active video. The Primary Source will be selected if active video is found, if no video is found, the Secondary Source will be selected, if no video is found in Secondary Source again, the no-input-signal is displayed. • Off / On
62 Primary Source Source AutoSwitch Settings Source AutoSwitch Settings Source AutoSwitch Primary Source Recovery Primary Source Secondary Source Move : DVI : : On : On Enter Return - The displayed image may differ depending on the model. Specify Primary Source for the automatic input source. Secondary Source Source AutoSwitch Settings Source AutoSwitch Settings Move Enter Return Source AutoSwitch Primary Source Recovery Primary Source Secondary Source : : PC : On : OnDVI - The displayed image may differ depending on the model. Specify Secondary Source for the automatic input source.
63
Picture
PC / DVI / MagicInfo Mode
Chapter 05
M ode
MENU m : T Picture Mode ENTER
Move Enter Return
Mode ：사용자 조정
Custom
Color Tone ：----
Color Control
Color Temp.
Image Lock
Auto Adjustment
Picture
Picture
Custom Information
Advertisement
▶More
-
The displayed image may differ depending on the model.
The LCD Display has four automatic picture settings ("Information", " Advertisement" and "Custom") that are preset at the
factory.
• Information
Recommended for communicating exact information (e.g. public information).
•Advertisement
Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads).
•
Custom
―
Not available when Dynamic Contrast is set to On .
64 Custom Move Enter Return Contrast Brightness Sharpness Gamma : 90 90 50 Custom Custom Natural Mode1 Mode2 Mode3 - The displayed image may differ depending on the model. By using the on-screen menus, the contrast and brightness can be changed to your personal preference. ― By adjusting the picture using the Custom function, Mode will change to Custom mode. ―Not available when Dynamic Contrast is set to On . Contrast Adjusts the Contrast. Brightness Adjusts the Brightness. Sharpness Adjusts the Sharpness. G amma Adjust the mid-range brightness (Gamma) for the picture. • Natural • Mode1 Sets the picture brighter than Natural. •Mode2 Sets the picture darker than Mode1. •Mode3 Increases the contrast between dark and bright colors.
65 Color Tone Move Enter Return Mode : Custom Custom Color Tone : 16:9 Color Control Color Temp. : 16:9 Image Lock : 동작 Auto Adjustment : 일반 Picture Picture Off Normal Cool Warm Custom ▶More - The displayed image may differ depending on the model. The Color tones can be changed. ― Not available when Dynamic Contrast is set to On . • Off / Cool / Normal / Warm / Custom ― If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled. ―If you set the Color Tone to Off, the Color Control function is disabled. Color Control Move Enter Return Red Green Blue 50 50 50 Color Control Color Control - The displayed image may differ depending on the model. Adjusts individual Red, Green, Blue Color balance. ― Not available when Dynamic Contrast is set to On . • Red / Green / Blue
66 Color Temp . Color Temp. 10000K - The displayed image may differ depending on the model. Color Temp. is a measure of the 'warmth' of the image Colors. ― This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color Tone are Off. Image Lock Move Enter Return Coarse Fine Position 2200 55 ▶ Image Lock Image Lock - The displayed image may differ depending on the model. - Available in PC mode only. Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. • Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the Center using the horizontal control menu. •Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). •Position Adjusts the screen location horizontally and vertically.
67 Auto A djustment Auto Adjustment Please wait.i - The displayed image may differ depending on the model. - Available in PC mode only. The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Signal Balance Move Enter Return Signal Balance ：사용자 조정 Signal Control Signal Balance Signal Balance Off On - The displayed image may differ depending on the model. Signal Balance Selects either On or Off with the signal balance. Signal Control ― Available when Signal Control is set to On . • R-Gain / G-Gain / B-Gain / R-Offset / G-Offset / B-Offset
68 Size Move Enter Return Signal Balance Size : HDMI Black Level : 일반 PIP Picture Dynamic Contrast : Off Lamp Control : 100 Picture Reset Picture Picture ▶More 16:9 4:3 Original Ratio - The displayed image may differ depending on the model. The Size can be switched. • 16:9 / 4:3 / Original Ratio HDMI Black Level Move Enter Return Signal Balance Size : 16:9 HDMI Black Level : PIP Picture Dynamic Contrast : Off Lamp Control : 100 Picture Reset Picture Picture ▶More Normal Low - The displayed image may differ depending on the model. When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your product by configuring the HDMI Black Level. • Normal / Low
69 PIP Picture Move Enter Return Contrast Brightness Sharpness Color Tint G 50 R 100 45 76 60 50 PIP Picture PIP Picture - The displayed image may differ depending on the model. Adjusts the PIP Screen Settings. ― Available Modes: PIP On • Contrast Adjusts the Contrast of the PIP window on the screen. •Brightness Adjusts the Brightness of the PIP window on the screen. •Sharpness Adjusts the Sharpness of the PIP window on the screen. •Color Adjusts the Color of the PIP window on the screen. ― PIP input only operates in AV , HDMI1, or HDMI2 mode. • Tint Adds a natural tone to the PIP window. ― PIP input only operates in AV , HDMI1, or HDMI2 mode. Dynamic Contrast Move Enter Return Signal Balance Size : 16:9 HDMI Black Level : Normal PIP Picture Dynamic Contrast : 해제 Lamp Control : 100 Picture Reset Picture Picture ▶More Off On - The displayed image may differ depending on the model. Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. • Off / On ― This function is disabled when PIP or Energy Saving is On .
70 Lamp Control Lamp Control 100 - The displayed image may differ depending on the model. Adjusts the inverter lamp in order to reduce energy consumption. ― Not available when Dynamic Contrast is set to On . Picture Reset Reset picture settings?i Ye sNo - The displayed image may differ depending on the model. Reset the screen settings.