Samsung Ud46cb Manual

							11
!
Do not use or keep combustible spray or an inflammable substance near 
the product.
 •An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
 •An increased internal temperature may cause a fire.
100Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects 
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
 •
Be sure to power off the product and disconnect the power cord 
when water or other foreign substances have entered the product. 
Then contact Samsung Customer Service Center.
 •Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic 
objects on top of the product.
 •Be sure to power off the product and disconnect the power cord 
when water or other foreign substances have entered the product. 
Then contact Samsung Customer Service Center.
 •Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period of 
time may cause afterimage burn-in or defective pixels.
 •Activate power-saving mode or a moving-picture screen saver if you 
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on 
using the product for an extended period of time (vacation, etc).
 •Dust accumulation combined with heat can cause a fire, electric shock 
or electric leakage.
!
Use the product at the recommended resolution and frequency.
 •Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
 •The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can 
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
 •
A fire or electric shock may result.   
						

							12
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
 •Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an 
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
 •Your hand or finger may get stuck and injured.
 •Tilting the product at an excessive angle may cause the product to fall 
and an injury may result.
Do not place heavy objects on the product.
 •Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
 •Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when 
removed from the remote control. Place the battery in a location that 
children or infants cannot reach.
 •
If children have had the battery in their mouths, consult your doctor 
immediately.
When replacing the battery, insert it with the right polarity (+, -).
 •Otherwise, the battery may become damaged or it may cause fire, 
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery 
and a used battery at the same time.
 •
Otherwise, the batteries may be damaged or cause fire, personal injury 
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must 
be returned for recycling purposes. The customer is responsible for returning 
the used or rechargeable batteries for recycling.
 •The customer can return used or rechargeable batteries to a nearby 
public recycling center or to a store selling the same type of the 
battery or rechargeable battery.  
						

							13
Precautions when handling the panel
Do not stand the product as shown in the image.
 •The panel is fragile and can get damaged.
!
Lay the product down to handle it as shown in the image.
 •the packaging can be used.
!
Ensure you use the handles on the back when moving the product.
Do not hold or grasp any area of the product within 15mm from the front.  
						

							14
Preparations
Chapter  02
Checking the Contents
Removing the Packaging
 ―The following images are for reference only. Real-life situations may differ from what is shown in the 
images.
1 Remove the black locking device at the bottom of the box.
321
2 Using the grooves in the box, lift and remove the top of the box.
3 Check the components and remove the styrofoam and plastic bag.
 ― The appearance of actual components may differ from the image shown.
4 Store the box in a dry area so that it can be used when moving the product in the future.                 
						

							15
 -Contact the vendor where you 
purchased the product if any 
components are missing.
 - The appearance of the components and 
items sold separately may differ from the 
image shown.
 -
A stand is not provided with the product. 
To install a stand, you can purchase one 
separately.
Components
 ―
Components may differ in different locations.
Quick setup guideWarranty card
(Not available in some 
locations) User manual
MagicInfo Lite Edition Software 
CD




Batteries (P.22)
(Not available in some locations)Remote Control (P. 21) Power cordD-SUB cable (P.41)
Wall-mount Fixed Bracket Kit
Checking the Components    
						

							16
Items sold separately
 -The following items can be purchased 
at your nearest retailer.
Wall-mount KitStandRS232C-Stereo cable (P. 98)DVI cable (P.42)HDMI-DVI cable (P. 42)
HDMI cable (P.43)Video cable (P. 46) Stereo cableComponent cable (P. 47)RCA stereo cable (P.49)
RCA cable (P.46)AV/Component Adapter (P. 46)AUDIO Adapter (P.46)LAN cable (P.99)Network Box (P. 50)
DP-DVI cable     
						

							17
Parts
External sensor KIT
 ―The External sensor KIT has a remote-control sensor, a brightness sensor and 
function keys. If mounting the display onto a wall, you can move the External 
sensor KIT to the side of the display.
 ― The color and shape of parts may differ from what is shown. Specifications are 
subject to change without notice to improve quality.
Name Description
Remote Control SensorAim the remote control towards this spot on the LCD Display.
 ―
Keep the area between the remote sensor and remote control obstacle-
free.
Light sensorAutomatically detects the intensity of ambient light around a selected display and 
adjusts the screen brightness.
Power indicatorTurns off in power-on mode and blinks green in power-saving mode.
SOURCE buttonSwitches from PC mode to Video mode.
Selects the input source that an external device is connected to.
POWER buttonUse this button for turning the LCD Display on and off.   
						

							18
Attaching the External sensor KIT to the sid
 ―This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor.
 ―The External sensor KIT can also be attached to a wall near the display.
 ―Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides. The display can be damaged.               
						

							19
Reverse Side
 ―The color and shape of parts may differ from what is shown. Specifications are 
subject to change without notice to improve quality.
D-SUB IN
AV  /
COMPONENT IN
HDMI IN 1
DVI OUT
(LOOPOUT) DVI IN 
(MagicInfo)
HDMI IN 2
CONTROL IN
IR OUT
RJ45 MDC
RS232C IN
RS232C OUT
ON
POWER
PC AUDIO
IN OUT
Port Description
CONTROL INSupplies power to the external sensor board or receives the light sensor signal.
IR OUTReceives the remote control signal via the external sensor board and outputs the 
signal via LOOP OUT.
RJ45 MDCConnects to MDC using a LAN cable.
RS232C INConnects to MDC using an RS232C cable.
RS232C OUT
PC AUDIO IN
Receives sound from a PC via an audio cable.
PC AUDIO OUTConnects to the audio of a source device.
AV / COMPONENT INConnects to a source device using the AV/component adapter.
D-SUB INConnects to a source device using a D-SUB cable.
HDMI IN 1, HDMI IN 2Connects to a source device using an HDMI cable.
DVI OUT (LOOPOUT)Connects to another product using a DVI cable.
DVI IN (MagicInfo)Connects to a source device using a DVI cable or DP-DVI cable.                              
						

							20
Anti-theft Lock
 ―An anti-theft lock allows you to use the product securely even in public places.
 ―The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
 - An anti-theft locking device can be purchased separately.
 -Refer to the user guide provided with your anti-theft locking device for details.
 -Anti-theft locking devices can be purchased at electronics retailers or online.