Samsung Ud46cb Manual

							51
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to 
1080p)
 •For better picture and audio quality, connect to a digital device using an 
HDMI cable.
 •An HDMI cable supports digital video and audio signals, and does not 
require an audio cable.
 -To connect the product to a digital device that does not support HDMI 
output, use an HDMI/DVI and audio cables.
 • The picture may not display normally (if at all) or the audio may not work if 
an external device that uses an older version of HDMI mode is connected to 
the product. If such a problem occurs, ask the manufacturer of the external 
device about the HDMI version and, if out of date, request an upgrade.
 •
Be sure to use an HDMI cable with a thickness of 14 mm or less.
 •Be sure to purchase a certified HDMI cable. Otherwise, the picture may not 
display or a connection error may occur.
 •A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
AV Device
HDMI IN 1, HDMI IN 2     
						

							52
Connecting to an Audio System
 ―Connecting parts may differ in different products.
PC AUDIO OUT    
						

							53
Connecting the network box (Sold separately)
 ―For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
 ―To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
 ―For details on how to use MagicInfo, refer to the DVD provided with the network box.
 ―The information in this section is subject to change without notice for quality improvement.
 ―If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or 
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit 
from a service technician. A product exchange or refund will also not be available.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B) Next(N) > Finish CancelEntering M agicInfo mode
1 After installing and connecting the network box (sold separately) to the product, power on the product.
2 Press SOURCE on the remote control, and select MagicInfo.
3 Select the default application you want to run when MagicInfo starts.  
						

							54
MagicInfo Setup Wizard - v.1.12Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway: 192 . 168 .  0  . 102
255 . 255 . 255 .  0
192 . 168 .   0   .   1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
Alternate DNS server: 10 . 44 . 33 . 22
10 . 33 . 22 . 11
< Back(B) Next(N) > Finish Cancel
4 Enter the IP information.
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and 
dialogs.
Current Language    :    Engilsh
German
English
French
Italian Chinese [Traditional]
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B) Next(N) > Finish Cancel
5 Select a language. ( The default language is English.)  
						

							55
MagicInfo Setup Wizard - v.1.12Select Screen Type - step 4
Landscape
Portrait
< Back(B) Next(N) > Finish Cancel6 Select a display mode.
MagicInfo Setup Wizard - v.1.12 Setup Information
1. Application :     MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
       IP :       192.168.0.102
3. Language :     English
4. Screen Type :     Landscape
Do not show again
< Back(B) Apply Finish Cancel
7 Double-check the settings you have just configured.
 ― If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom 
right of the screen.  
						

							56
Input
Chapter  04
S ource  L ist
MENU m : T  Input  Source List  ENTER 
Source List
Source List
Move Enter Return
PC 
：----
DVI  ：----
AV   ：----
Component  ：----
HDMI1  ：----
HDMI2  ：----
MagicInfo  ：----
 
 -
The displayed image may differ depending on the model.
 - To use M agicInfo, a network box (sold separately) must be connected to the product.
Use to select PC, HDMI or other external input sources connected to the LCD Display.
Use to select the screen of your choice.
1 PC
2 DVI
This is deactivated when a network box is installed.
3 AV
4 Component
5 HDMI1
6 HDMI2
7 MagicInfo
Activated when a network box is connected.    
						

							57
PIP
PIP
PIP
PIP
Move Enter Return
PIP
  ：On ►
Source  ：PC 
Size  ： 
Position  ： 
Transparency  ：Medium
 
Off
On
Turns the PIP Screen Off/On .
 •
Off / On
 ―
The displayed image may differ depending on the model.
 ―PIP turns off when the LCD Display is switched to an external source.
 ―If you select , ,  in Size, Position and Transparency will not be activated.
 ―The PIP function is not available when Video Wall is On .
 ―
When external AV devices such as VCRs or DVDs are connected to the LCD Display ,  PIP allows you to watch video from those devices in a small window super-imposed 
on the PC Video signal.     
						

							58
Source
PIP
PIP
Move Enter Return
PIP 
：On
Source  ：HDMI 1 
Size  ：AV
Position  ：----  
Transparency  ：투명하게DVI
AV
HDMI 1
HDMI 2
 -
The displayed image may differ depending on the model.
Selects the input source for the PIP.
Without Network box
Main picture Sub picture
PC DVI, AV , HDMI1, HDMI2
DVI PC
AV PC
HDMI1 PC
HDMI2 PC
With Network box
Main pictureSub picture
PC AV, HDMI1, HDMI2
AV PC
HDMI1 PC
HDMI2 PC
MagicInfo (Network Box) PC, AV, Component
 ―
PIP is disabled if the primary screen does not receive a signal.     
						

							59
Changes the Size of the PIP window.
 ―Picture > Size will be changed to 16:9 when PIP is On .Size
PIP
PIP
Move Enter Return
PIP 
：On 
Source  ：HDMI 1 
Size  ：---- 
Position  ：---- 
Transparency  ：투명하게
 -
The displayed image may differ depending on the model.
Position
PIP
PIP
Move Enter Return
PIP 
：On 
Source  ：HDMI 1 
Size  ：---- 
Position  ：---- 
Transparency  ：투명하게
 -
The displayed image may differ depending on the model.
Changes the Position of the PIP window.        
						

							60
Transparency
PIP
PIP
Move Enter Return
PIP 
：On 
Source  ：HDMI 1 
Size  ：---- 
Position  ：---- 
Transparency  ：투명하게
Opaque  Medium
Low High
 -
The displayed image may differ depending on the model.
Adjusts the Transparency of PIP windows.
 • High
 •Medium
 •Low
 •Opaque
Edit  Name
Edit Name
Edit Name
Move Enter Return
PC  
：----    ▶
DVI   ：----    ▶
AV   ：----    ▶
Component   ：----    ▶
HDMI1   ：----    ▶
HDMI2   ：----    ▶
 -
The displayed image may differ depending on the model.
Name the input device connected to the input jacks to make your input source selection easier.
VCR  / DVD  / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / 
PC / DVI PC / DVI Devices
 ― The displayed devices differ depending on the external input mode.
When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV . However, since 
640x480, 720p (1280x720), and 1080p (1920x1080) are common signals for  AV and PC, make sure to set the Edit Name in 
accordance with the input signal.
 ― The Picture menu changes depending on the input signal and Edit Name.
When using a DVI to HDMI cable connection (which does not support audio and video at the same time), the audio port 
should be connected via a separate audio cable.
When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC.
When an AV device is connected, set Edit Name to DVI Devices to enjoy the video and audio from the connected AV 
device.