Samsung Ud46cb Manual

							21
 -Remote control button functions may 
differ for different products.
Remote Control
 ―
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
MENU
OFF
VOL
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
Power off the product.
Enter the password in the OSD menu, or change 
the channel.
Mute the sound.
Unmuting the sound: Press MUTE again or press 
the volume control (+ VOL -) button.
Display or hide the onscreen display menu, or 
return to the previous menu.
Power on the product.
Adjust the volume.
Select a connected source device.        
CH 
CONTENT(HOME) 
MagicInfoLite/S  
BLANK   
DEL-/--  
						

							22
TOOLSINFO
MAGICINFOLOCK
PC
A
DVI
B
HDMI
C
EXITRETURN
Display information on the screen.
Move to the upper, lower, left or right menu, or 
adjust an option's setting. 
Activates a highlighted menu item.
Exit the current menu.
Manually select a connected input source from 
PC, DVI, or HDMI..
It sets safe lock function.
Quickly select frequently used functions.
Return to the previous menu.
MagicInfo Quick Launch Button.
MagicInfo can only be enabled when a network  box is connected.
This button is disabled for products that do not  support MagicInfo.
 -Remote control button functions may 
differ for different products.
To place batteries in the remote control    
3D  
DP

D       
						

							23
Adjusting the OSD with the Remote Control
ButtonsDescription
1 Open the OSD menu.
2 Select from Input, Picture, Sound, Setup or Multi 
Control in the displayed OSD menu screen.
3 Change settings as desired.
4 Finish setting.
5 Close the onscreen display (OSD) menu.
Remote Control Reception Range
7m ~ 10m
30˚30˚
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the 
left and right.
 ―
Store used batteries out of reach of children and recycle.
 ―Do not use a new and used battery together. Replace both batteries at the same time.
 ―Remove batteries when the remote control is not to be used for an extended period of time.   
						

							24
Connection Using an IR Stereo Cable (sold 
separately)
Controlling more than one display product using 
your remote control
 •Connect the [IR OUT] port on the product to the [CONTROL IN] port on the 
other display product using the dedicated stereo cable.
 •A command sent from the remote control pointed at product  will be 
received by both display products  and .
 ―
The appearance may differ depending on the product.
1 2
CONTROL INIR OUT
Controlling more than one display product using an 
external sensor kit (sold separately)
 •
A command sent from the remote control pointed at product (to which 
the external sensor kit is connected) will be received by both display 
products 
 and .
 ―
The appearance may differ depending on the product.
1 2
IR OUT
CONTROL INIR OUTCONTROL IN                 
						

							25
Before Installing the Product 
(Installation Guide)
15˚
 ―
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
 - Ensure that an authorized installation company installs the wall mount.
 -Otherwise, it may fall and cause personal injury.
 -Make sure to install the specified wall mount.
Tilting Angle and Rotation
 ―
Contact Samsung Customer Service Center for further details.
 • The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
 •To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
A
B
Figure 1.1 Side view
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35
C
 • When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface 
for ventilation and ensure that the ambient A temperature is kept below 35
C.  
						

							26
A
B
C
E
Figure 1.3 Side view
D D
Figure 1.2 Side view
Installation on an Indented Wall
 ―
Contact Samsung Customer Service Center for further details.
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35
C
 ―When installing the product on an indented wall, allow at least the space specified above between the product and wall for 
ventilation and ensure that the ambient temperature is kept below 35
C.
Dimensions
1
2
3
4
5
Unit: mm (inches)
Model name12234345
UD46C-B1023.7 1018.3572.9578.395.5
 ―
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.  
						

							27
Installing the Wall MountInstalling the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the 
wall mount on your own.  
						

							28
Wall Mount Kit Specifications (VESA)
 ―Install your wall mount on a solid wall perpendicular to the floor. Before 
attaching the wall mount to surfaces other than plaster board, please contact 
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe 
personal injury.
 • Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
 •Do not use screws that are longer than the standard length or do not comply with the VESA standard screw 
specifications. Screws that are too long may cause damage to the inside of the product.
 •For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ 
depending on the wall mount specifications.
 •
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. 
Samsung is not liable for these kinds of accidents.
 •Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the 
consumer fails to follow the product installation instructions.
 •Do not mount the product at more than a 15 degree tilt.
 •Always have two people mount the product on a wall.
 •Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name VESA screw hole 
specs (A * B) in 
millimetersStandard Screw
Quantity
UD46C-B600 400M8, L12~16
 ―
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.  
						

							29
Remote Control
Cable Connection
RS232C Cable
InterfaceRS232C (9 pins)
PinTxD (No.2), RxD (No.3), GND (No.5)
Bit rate9600 bps
Data bits8 bit
ParityNone
Stop bit1 bit
Flow controlNone
Maximum length15 m (only shielded type)
 •Pin assignment
12 3 4 5
6 7 8 9
Pin Signal
1Detect data carrier
2Received data
3Transmitted data
4Prepare data terminal
5Signal ground
6Prepare data set
7Send request
8Clear to send
9Ring indicator  
						

							30
 •RS232C cable
Connector: 9-Pin D-Sub
Cable: Cross Cable
1 59
616
95
11
-P1- -P1- -P2--P2-
Female Rx
Tx
Gnd2
3
5 -------->