Samsung Ud46cb Manual

							91
Side  Gray
Move Enter Return
Pixel Shift 
Timer   
Bar 
Eraser
Pixel
Side Gray  : 
Light
Dark Off
Safety Screen
Safety Screen
 -
The displayed image may differ depending on the model.
Select the brightness of the grey for the screen background.
 • Off / Light / Dark
Resolution  Select
Move Enter Return
Setup
Setup
Resolution Select     
: 가로
Power  On Adjustment
OSD Rotation       : 가로
Advanced Settings
Setup Reset
Reset All▶MoreOff
1024 X 768
1280 X 768 
1360 X 768
1366 X 768 
S/N : - - - - - - - - - - - - - - - - - -
 - The displayed image may differ depending on the model.
 - Available in PC mode only.
When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to  1024 
x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you 
can have the picture displayed on the screen in the specified resolution.
 ― Selecting the menu is only allowed when the graphics resolution is set to  1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 
768 @ 60Hz or 1366 x 768 @ 60Hz.
 • Off / 1024 X 768 / 1280 X 768 / 1360 X 768 / 1366 X 768        
						

							92
Power  O n A djustment
Adjust Return
Power  On Adjustment  :           0
Power  On Adjustment
Power  On Adjustment
 -
The displayed image may differ depending on the model.
Adjusts the Power On time for the screen. 
 ―
Set the Power On time to be longer to avoid overvoltage. 
OSD  Rotation
Move Enter Return
Setup
Setup
Resolution Select      : Off
Power  On Adjustment
OSD Rotation     :
Advanced Settings
Setup Reset
Reset All▶More
S/N : - - - - - - - - - - - - - - - - - -
Landscape
Portrait
 -The displayed image may differ depending on the model.
OSD Rotate
 • Landscape / Portrait       
						

							93
Advanced  Settings
Move Enter Return
Temperature
Auto Power      : Off
Button Lock      : Off
User Auto  Color
Standby Control   :  Auto
Lamp Schedule
OSD Display
Software Upgrade 
Advanced Settings
Advanced Settings
▶
▶
▶
▶
▶
▶
▶
▶
 -
The displayed image may differ depending on the model.
Temperature
Configures the setting for the Temperature function, which detects the internal temperature for the product's protection.
T emperature C ontrol
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77
C by default.
 ―
The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power 
off to prevent overheating if the temperature keeps rising.
 ― It is best to use the product at temperatures 75 - 80C (based on ambient temperature of 40C).
Refer to "Specifications" herein for details about operating conditions.
Current  Temperature
Shows the current temperature of the product.
A uto  P ower
Move Enter Return
Temperature
Auto Power   :
Button Lock   :
User Auto  Color
Standby Control   :  Auto
Lamp Schedule
OSD Display
Software Upgrade 
Advanced Settings
Advanced Settings
Off
On
 -
The displayed image may differ depending on the model.
Enables or disables Auto Power for the product.
 • Off / On
 ―
When Auto Power is On , the product will power on automatically as soon as it is connected to power.       
						

							94
Button  Lock
Move Enter Return
Temperature
Auto Power       : Off
Button Lock   :
User Auto  Color
Standby Control   :  Auto
Lamp Schedule
OSD Display
Software Upgrade 
Advanced Settings
Advanced Settings
Off
On
 -
The displayed image may differ depending on the model.
Locks or unlocks the monitor control buttons on the product.
 • Off / On
User  Auto  C olor
Move Enter Return
Auto Color
Reset 
User Auto  Color
User Auto  Color
 -
The displayed image may differ depending on the model.
 • Auto Color
Automatically adjusts the colors.
 •Reset
Resets the color settings.
 ―
Enabled only in PC mode.       
						

							95
Standby  Control
Move Enter Return
Temperature
Auto Power             : Off
Button Lock      : Off
User Auto  Color
Standby Control    : 자동설정
Lamp Schedule
OSD Display
Software Upgrade 
Advanced Settings
Advanced Settings
Off
On
Auto
 -
The displayed image may differ depending on the model.
Sets the standby mode, which will be activated when no input signal is detected.
 • Off
A message will read No Signal if no input signal is detected.
 •On
Power-saving mode will be activated if no input signal is detected.
 •Auto
When no input signal is detected,
 ―
Power-saving mode will be activated if an external device is connected.
 ―A message will read No Signal if no external device is connected.
Lamp  Schedule
Move Enter Return
Lamp Schedule    : On     ▶
Lamp Schedule
Lamp Schedule
Schedule 1Hour 
Lamp
am/pm
Minute12        00        am       100
12        00        am       100Schedule 2
 -
The displayed image may differ depending on the model.
Adjusts the luminance to a user-specified value at a specified time.       
						

							96
OSD Display
Move Enter Return
Source OSD　　　　　   　
Not Optimum Mode OSD
No Signal OSD　　　　　　　　
MDC OSD　　　　　　　　
  
OSD Display
OSD Display
　: On　　   　 　▶
　: On　　   　 　▶
　: On　　    　　▶
　: On　　    　　▶
 -
The displayed image may differ depending on the model.
Displays or hides a menu item on the screen.
Source  OSD
 •
Off / On
Not O ptimum M ode OSD
 •
Off / On
No Signal OSD
 •Off / On
MDC OSD
 •Off / On    
						

							97
Software  Upgrade
 -
When there are two or more BMP images, they are displayed on the screen using a 
slideshow.
 - It is recommended that the playback interval between two BMP images in the slideshow 
should be one second. The image extraction probability will decrease with other playback 
intervals.
 -
A BMP image might not be extracted if it is covered by another image (for example, the mouse 
pointer). 
Move Enter Return
Temperature
Auto Power       : Off
버튼 잠금   :  해제
사용자 자동 색상 조정
대기 모드 설정   :  자동설정
휘도 조정 기능
OSD Display
Software Upgrade
Advanced Settings
Advanced Settings
Upgrade is completed.
Power will be off and turned on automatically.
OK
 -
The displayed image may differ depending on the model.
Performs a software upgrade.
1 Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an 
SW code. The image below will appear on the screen of the product.
2 While a BMP image onto which the software code has been converted is displayed on the screen, select  Software 
Upgrade.
3 If a more recent version than the current software version is detected, you will be asked whether to upgrade the current 
software. If you select Ye s , the upgrade is performed.
4 When the software upgrade is completed, the product is turned off and on automatically.
 ―
This only operates with a digital signal, such as in DVI , HDMI1, or HDMI2 mode. ( The input resolution must be identical to 
the panel resolution.)
 ― In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the  Edit Name is set to 
PC or DVI PC. 
 ― This is only supported if the Size is set to 16:9.    
						

							98
Setup  Reset
Reset settings in setup?i
Ye sNo
 -
The displayed image may differ depending on the model.
Reset all the values for a setting.
Reset  All
All Settings return to default settings.i
Ye sNo
 -
The displayed image may differ depending on the model.
Reset all the settings for the display.  
						

							99
Using MDC
Chapter  09
Multi  Control
MENU m : T  Multi Control  ENTER 
Multi Control
Multi Control
Move
EnterReturn
ID Setup 
:     00
ID Input  :     --
MDC Connection  :     RJ45 MDC
Network Setting 
 - The displayed image may differ depending on the model.
 • ID Setup
Assigns distinctive IDs to the SET.
 •ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds 
to the transmitter setting becomes activated. 
 •MDC Connection
Selects a port to receive the MDC inputs from.
 ―
RS232C MDC: Communicates with the MDC via a RS232C MDC cable.
 ―RJ45 MDC: Communicates with the MDC via an RJ45 MDC cable.
 • Network Setting
IP Setting : Manual, Auto
IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
Gateway  : Manually enter the Gateway  if IP Setting is set to Manual.    
						

							100
MDC Program Installation/Uninstallation
Installation
1 Insert the installation CD into the CD-ROM drive.
2 Click the MDC Unified installation program.
3 Select a language for installation. Next, click "OK".
4 When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
5 In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next ".
6 In the displayed "Customer Information" window, fill out all the information fields and click "Next".
7 In the displayed "Destination Folder" window, select the directory path you want to install the program in and click " Next".
8 In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install".
9 Installation progress will be displayed.
10 Click "Finish" in the displayed "InstallShield Wizard Complete" window.
11 The MDC Unified shortcut icon will be created on the desktop after installation.
Uninstallation
1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2 Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the 
graphics card, mother board and network 
conditions.
If a software installation window is not 
displayed on the main screen, install with 
the MDC Unified execution file in the 
MDC folder on the CD.
If the directory path is not specified, the 
program will be installed in the default 
directory path.
Select "Launch MDC Unified" and 
click "Finish" to run the MDC program 
immediately.
 -
The MDC execution icon may not be 
displayed depending on the PC system 
or product specifications.
 - Press F5 if the execution icon is not 
displayed.